Evaluations of the Chemical Mass Balance Method for Determining Contributions of Gasoline and Diesel Exhaust to Ambient Carbonaceous Aerosols

Abstract The US. Department of Energy Gasoline/Diesel PM Split Study was conducted to assess the sources of uncertainties in using an organic compound–based chemical mass balance receptor model to quantify the relative contributions of emissions from gasoline (or spark ignition [SI]) and diesel (or compression ignition [CI]) engines to ambient concentrations of fine particulate matter (PM2.5) in California’s South Coast Air Basin (SOCAB). In this study, several groups worked cooperatively on source and ambient sample collection and quality assurance aspects of the study but worked independently to perform chemical analysis and source apportionment. Ambient sampling included daily 24–hr PM2.5 samples at two air quality–monitoring stations, several regional urban locations, and along freeway routes and surface streets with varying proportions of automobile and truck traffic. Diesel exhaust was the dominant source of total carbon (TC) and elemental carbon (EC) at the Azusa and downtown Los Angeles, CA, monitoring sites, but samples from the central part of the air basin showed nearly equal apportionments of CI and SI. CI apportionments to TC were mainly dependent on EC, which was sensitive to the analytical method used. Weekday contributions of CI exhaust were higher for Interagency Monitoring of Protected Visual Environments (IMPROVE; 41 ± 3.7%) than Speciation Trends Network (32 ± 2.4%). EC had little effect on SI apportionment. SI apportionments were most sensitive to higher molecular weight polycyclic aromatic hydrocarbons (indeno[123–cd]pyrene, benzo(ghi)perylene, and coronene) and several steranes and hopanes, which were associated mainly with high emitters. Apportionments were also sensitive to choice of source profiles. CI contributions varied from 30% to 60% of TC when using individual source profiles rather than the composites used in the final apportionments. The apportionment of SI vehicles varied from 1% to 12% of TC depending on the specific profile that was used. Up to 70% of organic carbon (OC) in the ambient samples collected at the two fixed monitoring sites could not be apportioned to directly emitted PM emissions.

[1]  Nigel N. Clark,et al.  Variations in Speciated Emissions from Spark-Ignition and Compression-Ignition Motor Vehicles in California’s South Coast Air Basin , 2007, Journal of the Air & Waste Management Association.

[2]  J. Schauer,et al.  Source apportionment of PM2.5 in the Southeastern United States using solvent-extractable organic compounds as tracers. , 2002, Environmental science & technology.

[3]  Michael J. Kleeman,et al.  MEASUREMENT OF EMISSIONS FROM AIR POLLUTION SOURCES. 2. C1 THROUGH C30 ORGANIC COMPOUNDS FROM MEDIUM DUTY DIESEL TRUCKS , 1999 .

[4]  Reinhard F. Bruch,et al.  Photoacoustic spectrometer for measuring light absorption by aerosol: instrument description , 1999 .

[5]  Barbara Zielinska,et al.  Emission Rates and Comparative Chemical Composition from Selected In-Use Diesel and Gasoline-Fueled Vehicles , 2004, Journal of the Air & Waste Management Association.

[6]  Judith C. Chow,et al.  Fine Particle and Gaseous Emission Rates from Residential Wood Combustion , 2000 .

[7]  J. Schauer,et al.  Source reconciliation of atmospheric gas-phase and particle-phase pollutants during a severe photochemical smog episode. , 2002, Environmental science & technology.

[8]  Hans Moosmüller,et al.  Equivalence of elemental carbon by thermal/optical reflectance and transmittance with different temperature protocols. , 2004, Environmental science & technology.

[9]  John G. Watson,et al.  The effective variance weighting for least squares calculations applied to the mass balance receptor model , 1984 .

[10]  J. Schauer Evaluation of elemental carbon as a marker for diesel particulate matter , 2003, Journal of Exposure Analysis and Environmental Epidemiology.

[11]  Judith C. Chow,et al.  The dri thermal/optical reflectance carbon analysis system: description, evaluation and applications in U.S. Air quality studies , 1993 .

[12]  Judith C. Chow,et al.  PM-10 Exhaust Samples Collected during IM-240 Dynamometer Tests of In-Service Vehicles in Nevada , 1997 .

[13]  J. Chow,et al.  Emissions from Charbroiling and Grilling of Chicken and Beef , 2003, Journal of the Air & Waste Management Association.

[14]  J S Lighty,et al.  Phase and size distribution of polycyclic aromatic hydrocarbons in diesel and gasoline vehicle emissions. , 2004, Environmental science & technology.

[15]  R. Henry History and fundamentals of multivariate air quality receptor models , 1997 .

[16]  Mridul Gautam,et al.  Chemical Speciation of Exhaust Emissions from Trucks and Buses Fueled on Ultra-Low Sulfur Diesel and CNG , 2002 .

[17]  Ronald E. Hester,et al.  Receptor modeling for air quality management , 1997 .

[18]  Judith C. Chow,et al.  Comparison of IMPROVE and NIOSH Carbon Measurements , 2001 .

[19]  Tan Zhu,et al.  Receptor modeling application framework for particle source apportionment. , 2002, Chemosphere.

[20]  G R Cass,et al.  Measurement of emissions from air pollution sources. 3. C1-C29 organic compounds from fireplace combustion of wood. , 2001, Environmental science & technology.

[21]  W. Patrick Arnott,et al.  Nitrogen dioxide and kerosene-flame soot calibration of photoacoustic instruments for measurement of light absorption by aerosols , 2000 .

[22]  C. F. Rogers,et al.  Evaluation of 1047-nm photoacoustic instruments and photoelectric aerosol sensors in source-sampling of black carbon aerosol and particle-bound PAHs from gasoline and diesel powered vehicles. , 2005, Environmental science & technology.

[23]  D. Lawson Northern Front Range Air Quality Study , 2007 .

[24]  James J. Schauer,et al.  Source apportionment of airborne particulate matter using organic compounds as tracers , 1996 .