Sensing the soot load in automotive diesel particulate filters by microwave methods

Modern vehicles with diesel engines need to be equipped with particulate filters (DPFs) to meet today's and tomorrow's stringent emission regulations. Such filters must be regenerated on a regular basis to burn off the soot adsorbed in the course of time. As the regeneration processes consume fuel, they must be kept to the bare minimum which requires a detailed knowledge of the actual soot load in the filter. We have investigated if the soot load can be determined in situ by the cavity perturbation method at operating frequencies in the low GHz range. We will show that, indeed, current microwave technology as used, for instance, in cellular phones is capable of detecting the soot load in a diesel particulate filter. Experimentally observed sensitivities of cavity resonance frequencies to soot load (adsorbed mass) were as high as 3 MHz g−1. This contribution reports on the measurement approach, experimental results obtained in industrial dynamometer test benches and the conclusions to be drawn from the results.

[1]  Martyn V. Twigg,et al.  Cleaning the Air We Breathe - Controlling Diesel Particulate Emissions from Passenger Cars , 2009 .

[2]  J. F. Haw.  In - situ spectroscopy in heterogeneous catalysis , 2002 .

[3]  D. Kubinski,et al.  Sensor and method for determining the ammonia loading of a zeolite SCR catalyst , 2008 .

[4]  Ralf Moos,et al.  Sensor for directly determining the state of a NOx storage catalyst , 2008 .

[5]  Gunter Hagen,et al.  TWC: Lambda Control and OBD without Lambda Probe - An Initial Approach , 2008 .

[6]  Ralf Moos,et al.  Catalyst State Observation via the Perturbation of a Microwave Cavity Resonator , 2008 .

[7]  Siegfried Stapf,et al.  NMR Imaging in Chemical Engineering , 2006 .

[8]  Joerg Adler,et al.  Ceramic Diesel Particulate Filters , 2005 .

[9]  Debora Fino,et al.  Open issues in oxidative catalysis for diesel particulate abatement , 2008 .

[10]  Ralf Moos,et al.  Direct Catalyst Monitoring by Electrical Means: An Overview on Promising Novel Principles , 2009 .

[11]  T. Johnson.  Diesel Emission Control in Review , 2001 .

[12]  Shuh-Han Chao,et al.  Measurements of Microwave Conductivity and Dielectric Constant by the Cavity Perturbation Method and Their Errors , 1985 .

[13]  R. Harrington.  Time-Harmonic Electromagnetic Fields , 1961 .

[14]  U. Alkemade,et al.  Engines and exhaust after treatment systems for future automotive applications , 2006 .

[15]  Ralf Moos,et al.  On the inverse problem associated with the observation of electrochemical processes by the RF cavity perturbation method , 2009, 2009 6th International Multi-Conference on Systems, Signals and Devices.

[16]  Ralf Moos,et al.  Electrical In Situ Characterization of Three-Way Catalyst Coatings , 2009 .

[17]  B. Weckhuysen.  In situ Spectroscopy of Catalysts , 2005 .

[18]  R. Sagdeev,et al.  Multinuclear magnetic resonance imaging as a multifunctional tool for the investigation of the properties of materials, transport processes and catalytic reactions , 2007 .