CFD-DEM simulation of spouting of corn-shaped particles

Abstract Three dimensionally coupled computational fluid dynamics (CFD) and discrete element method (DEM) were used to investigate the flow of corn-shaped particles in a cylindrical spouted bed with a conical base. The particle motion was modeled by the DEM, and the gas motion by the k-ɛ two-equation turbulent model. A two-way coupling numerical iterative scheme was used to incorporate the effects of gas–particle interactions in terms of momentum exchange. The corn-shaped particles were constructed by a multi-sphere method. Drag force, contact force, Saffman lift force, Magnus lift force, and gravitational force acting on each individual particle were considered in establishing the mathematical modeling. Calculations were carried out in a cylindrical spouted bed with an inside diameter of 200 mm, a height of 700 mm, and a conical base of 60°. Comparison of simulations with experiments showed the availability of the multi-sphere method in simulating spouting action with corn-shaped particles, but it depended strongly on the number and the arrangement of the spherical elements. Gas–solid flow patterns, pressure drop, particle velocity and particle concentration at various spouting gas velocity were discussed. The results showed that particle velocity reaches a maximum at the axis and then decreases gradually along the radial direction in the whole bed. Particle concentration increases along the radial direction in the spout region but decreases in the fountain region, while it is nearly constant in the annulus region. Increasing spouting gas velocity leads to larger pressure drop, remarkably increased speed of particle moving upward or downward, but decreased particle concentration.

[1]  John R. Grace,et al.  Fluidization of biomass particles: A review of experimental multiphase flow aspects , 2007 .

[2]  R. D. Mindlin.  Elastic Spheres in Contact Under Varying Oblique Forces , 1953 .

[3]  D. Els,et al.  Calibration of granular material parameters for DEM modelling and numerical verification by blade-granular material interaction. , 2009 .

[4]  Yun-Chi Chung,et al.  Discrete element modelling and experimental validation of a granular solid subject to different loading conditions , 2006 .

[5]  Qiang Yao,et al.  Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations , 2008 .

[6]  Aibing Yu,et al.  Computational Study of Flow Regimes in Vertical Pneumatic Conveying , 2009 .

[7]  Mingyao Zhang,et al.  DEM simulation of gas-solid flow behaviors in spout-fluid bed , 2006 .

[8]  K. B. Mathur,et al.  A technique for contacting gases with coarse solid particles , 1955 .

[9]  Mohammad Hossein Abbaspour-Fard,et al.  Modeling nonspherical particles using multisphere discrete elements , 2001 .

[10]  Aibing Yu,et al.  Discrete particle simulation of gas fluidization of ellipsoidal particles , 2011 .

[11]  Cedric Briens,et al.  Biomass Valorization for Fuel and Chemicals Production -- A Review , 2008 .

[12]  Paul Langston,et al.  Distinct element modelling of non-spherical frictionless particle flow , 2004 .

[13]  J. Zhan,et al.  Improved DEM-CFD Model and Validation: A Conical-Base Spouted Bed Simulation Study , 2010 .

[14]  Aibing Yu,et al.  Dynamic Simulation of the Packing of Ellipsoidal Particles , 2011 .

[15]  Wenqi Zhong,et al.  Computational Fluid Dynamics (CFD)–Discrete Element Method (DEM) Simulation of Gas–Solid Turbulent Flow in a Cylindrical Spouted Bed with a Conical Base , 2011 .

[16]  Mohammad Hossein Abbaspour-Fard,et al.  Theoretical Validation of a Multi-sphere, Discrete Element Model Suitable for Biomaterials Handling Simulation , 2004 .

[17]  J. Grace,et al.  Spouting of biomass particles: a review. , 2008, Bioresource technology.

[18]  Masao Sakamoto,et al.  Quasi-three-dimensional numerical simulation of spouted beds in cylinder , 2000 .

[19]  Tom Dyakowski,et al.  Flow of sphero-disc particles in rectangular hoppers - A DEM and experimental comparison in 3D , 2004 .

[20]  H. Littman,et al.  Flow regimes for spout‐fluid beds , 1984 .

[21]  John R. Grace,et al.  Particle velocity profiles and solid flow patterns in spouted beds , 1994 .

[22]  F. W. Schmidt,et al.  USE OF A PRESSURE-WEIGHTED INTERPOLATION METHOD FOR THE SOLUTION OF THE INCOMPRESSIBLE NAVIER-STOKES EQUATIONS ON A NONSTAGGERED GRID SYSTEM , 1988 .

[23]  A. O. Raji,et al.  Discrete element modelling of the deformation of bulk agricultural particulates , 1999 .

[24]  P. Cleary,et al.  Dynamics of gas–solid fluidised beds with non-spherical particle geometry , 2010 .

[25]  Rui Xiao,et al.  Discrete element method modeling of non-spherical granular flow in rectangular hopper , 2010 .

[26]  C. Lun,et al.  Numerical simulation of dilute turbulent gas-solid flows in horizontal channels , 1997 .

[27]  Feras Y. Fraige,et al.  Distinct element modelling of cubic particle packing and flow , 2008 .

[28]  Tawatchai Charinpanitkul,et al.  Investigation of Fluid and Coarse‐Particle Dynamics in a Two‐Dimensional Spouted Bed , 2004 .

[29]  S. Takeuchi,et al.  Discrete element method simulation of three-dimensional conical-base spouted beds , 2008 .

[30]  C. Lun.  Numerical simulation of dilute turbulent gas–solid flows , 2000 .

[31]  Bin Li,et al.  Numerical simulation on mixing kinetics of slender particles in a rotary dryer , 2009 .

[32]  P. A. Langston,et al.  Discrete element simulation of granular flow in 2D and 3D hoppers: Dependence of discharge rate and wall stress on particle interactions , 1995 .

[33]  R. Mei.  An approximate expression for the shear lift force on a spherical particle at finite reynolds number , 1992 .

[34]  F. Bertrand,et al.  DEM-based models for the mixing of granular materials , 2005 .

[35]  Direct Numerical Simulation of Dense Gas-Solid Two-Phase Flows , 2008 .

[36]  John R. Grace,et al.  Spouted and spout-fluid beds : fundamentals and applications , 2010 .

[37]  John R. Grace,et al.  Spouted bed hydrodynamics in a 0.91 m diameter vessel , 1987 .

[38]  A. A. Amsden,et al.  A simplified MAC technique for incompressible fluid flow calculations , 1970 .

[39]  J. Baxter,et al.  Three-dimensional particle shape descriptors for computer simulation of non-spherical particulate assemblies , 2004 .

[40]  H. Hertz.  Ueber die Berührung fester elastischer Körper. , 1882 .

[41]  Jin Y. Ooi,et al.  A study of influence of gravity on bulk behaviour of particulate solid , 2008 .

[42]  A. Yu,et al.  Discrete particle simulation of particulate systems: Theoretical developments , 2007 .

[43]  Harald Kruggel-Emden,et al.  A study on the validity of the multi-sphere Discrete Element Method , 2008 .

[44]  THREE-DIMENSIONAL NUMERICAL SIMULATION ON CONVEYING PROPERTIES OF GAS-SOLID INJECTOR UNDER PRESSURIZATION , 2004 .

[45]  John R. Grace,et al.  Hydrodynamics of spout-fluid beds , 1985 .

[46]  Shintaro Takeuchi,et al.  Discrete element study of particle circulation in a 3-D spouted bed , 2005 .

[47]  J. Marshall,et al.  DEM simulation of the particle dynamics in two-dimensional spouted beds , 2008 .

[48]  Baosheng Jin,et al.  Discrete Element Method Simulation of Cylinder‐Shaped Particle Flow in a Gas‐Solid Fluidized Bed , 2009 .

[49]  L. Vu-Quoc,et al.  A 3-D discrete-element method for dry granular flows of ellipsoidal particles , 2000 .

[50]  Paul W. Cleary,et al.  DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge , 2002 .

[51]  Runyu Yang,et al.  Discrete particle simulation of particulate systems: A review of major applications and findings , 2008 .

[52]  Shintaro Takeuchi,et al.  Discrete element simulation of a flat-bottomed spouted bed in the 3-D cylindrical coordinate system , 2004 .