Towards further internal heat integration in design of reactive distillation columns-Part IV: Application to a high-purity ethylene glycol reactive distillation column

In the first three papers of this series, it has been shown that strengthening internal heat integration within a reactive distillation column involving reactions with high thermal effect is really effective for the reduction of utility consumption and capital investment besides the improvement in process dynamics and operation. One important issue that remains unstudied so far is the influences of reaction selectivity upon the reinforcement of internal heat integration, since the reaction operation is often accompanied by side-reactions and the maintenance of a high selectivity is extremely necessary in process synthesis and design. A reactive distillation column synthesizing high-purity ethylene glycol through the hydration of ethylene oxide is chosen and studied in this work. Because of the unfavorable physicochemical properties of the reacting mixture separated (e.g., the fairly large volatility between the reactants and the existence of a consecutive side-reaction), the process represents a challenging problem for the reinforcement of internal heat integration. Intensive comparison is conducted between the process designs with and without the consideration of further internal heat integration between the reaction operation and the separation operation involved, and it has been found that seeking further internal heat integration still leads to a substantial reduction of energy requirement, in addition to a further abatement in capital investment. Moreover, a favorable effect is again observed upon the process dynamics and operability. These striking outcomes manifest evidently that seeking further internal heat integration should be considered in process synthesis and design irrespective of what a reaction selectivity has been assigned.

[1]  Domingos Barbosa,et al.  Optimization of reactive distillation processes with simulated annealing , 2000 .

[2]  Rajamani Krishna,et al.  Modelling reactive distillation , 2000 .

[3]  San-Jang Wang,et al.  Control of a high‐purity ethylene glycol reactive distillation column with insights of process dynamics , 2009 .

[4]  J. D. Perkins,et al.  Process control structure selection based on economics , 2000 .

[5]  Domingos Barbosa,et al.  SIMOP: Efficient reactive distillation optimization using stochastic optimizers , 2006 .

[6]  A. Ciric,et al.  Steady State Multiplicities in an Ethylene Glycol Reactive Distillation Column , 1994 .

[7]  San-Jang Wang,et al.  Towards further internal heat integration in design of reactive distillation columns—Part III: Application to a MTBE reactive distillation column , 2008 .

[8]  Johan Grievink,et al.  Optimisation of the conceptual design of reactive distillation columns , 2000 .

[9]  Rajamani Krishna,et al.  Dynamic behaviour of reactive distillation columns described by a nonequilibrium stage model , 2001 .

[10]  Steinar Hauan,et al.  Graphical methods for reaction distribution in a reactive distillation column , 2000 .

[11]  P. Daoutidis,et al.  Modeling, Analysis and Control of Ethylene Glycol Reactive Distillation Column , 1999 .

[12]  J. Álvarez-Ramírez,et al.  A robust PI control configuration for a high-purity ethylene glycol reactive distillation column , 2000 .

[13]  D. M. Herron,et al.  Efficient use of an intermediate reboiler or condenser in a binary distillation , 1998 .

[14]  Keigo Matsuda,et al.  Graphical Synthesis of an Internally Heat-Integrated Distillation Column , 2006 .

[15]  Nicolás J. Scenna,et al.  Start-up Operation of Reactive Columns with Multiple Steady States: The Ethylene Glycol Case , 2003 .

[16]  T. Corrigan,et al.  Effect of Distillation on a Chemical Reaction , 1968 .

[17]  Qunxiong Zhu,et al.  Seeking synergistic effect- : A key principle in process intensification , 2007 .

[18]  Muhammad A. Al-Arfaj,et al.  Control of ethylene glycol reactive distillation column , 2002 .

[19]  Michael F. Malone,et al.  Simulation of kinetic effects in reactive distillation , 2000 .

[20]  Robert S. Huss,et al.  Multiple steady states in reactive distillation: kinetic effects , 2002 .

[21]  Masaru Nakaiwa,et al.  Internally Heat-Integrated Distillation Columns: A Review , 2003 .

[22]  Yuji Naka,et al.  AN INTERMEDIATE HEATING AND COOLING METHOD FOR A DISTILLATION COLUMN , 1980 .

[23]  Atsushi Tsutsumi,et al.  Towards further internal heat integration in design of reactive distillation columns—Part II. The process dynamics and operation , 2006 .

[24]  Michael F. Doherty,et al.  Design method for kinetically controlled, staged reactive distillation columns , 1998 .

[25]  Amy R. Ciric,et al.  Synthesis of nonequilibrium reactive distillation processes by MINLP optimization , 1994 .

[26]  Efstratios N. Pistikopoulos,et al.  Modular synthesis framework for combined separation/reaction systems , 2001 .

[27]  A. Tsutsumi,et al.  Towards further internal heat integration in design of reactive distillation columns—part I: The design principle , 2005 .

[28]  Kejin Huang,et al.  Deepening Internal Mass Integration in Design of Reactive Distillation Columns, 1: Principle and Procedure , 2009 .

[29]  J. Álvarez-Ramírez,et al.  On the Steady-State Multiplicities for an Ethylene Glycol Reactive Distillation Column , 1999 .

[30]  Achim Kienle,et al.  Optimization of a reactor network for ethylene glycol synthesis , 1999 .

[31]  Ignacio E. Grossmann,et al.  A disjunctive programming approach for the optimal design of reactive distillation columns , 2001 .

[32]  Johan Grievink,et al.  Designing reactive distillation processes: present and future , 2004, Comput. Chem. Eng..

[33]  Rajamani Krishna,et al.  Comparison of equilibrium stage and nonequilibrium stage models for reactive distillation , 2000 .

[34]  Efstratios N. Pistikopoulos,et al.  Generalized modular representation framework for process synthesis , 1996 .