Particleboard from wood particles and sycamore leaves: Physico-mechanical properties

[1]  M. Aghakhani,et al.  The potential for using the sycamore (Platus orientalis) leaves in manufacturing particleboard , 2014, International Journal of Environmental Science and Technology.

[2]  T. Tabarsa,et al.  Improving some of applied properties of oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunie) wood employing nano-SiO2 , 2013 .

[3]  H. Pirayesh,et al.  Effect of using walnut/almond shells on the physical, mechanical properties and formaldehyde emission of particleboard , 2013 .

[4]  R. Wool,et al.  Composites from Northern Red Oak (Quercus robur) Leaves and Plant Oil-Based Resins , 2013 .

[5]  N. Ayrilmis,et al.  Utilization of extract of fresh tree leaves as extender in synthetic adhesives for laminated veneer lumber (LVL) , 2013 .

[6]  T. Tabarsa,et al.  The potential for using walnut (Juglans regia L.) shell as a raw material for wood-based particleboard manufacturing , 2012 .

[7]  A. Błędzki,et al.  Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .

[8]  H. Pirayesh,et al.  Using almond (Prunus amygdalus L.) shell as a bio-waste resource in wood based composite , 2012 .

[9]  A. Ashori,et al.  Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse , 2011 .

[10]  J. Sarki,et al.  Potential of using coconut shell particle fillers in eco-composite materials , 2011 .

[11]  Amir Nourbakhsh,et al.  Nano-SiO2 filled rice husk/polypropylene composites: Physico-mechanical properties , 2011 .

[12]  Sun-Young Lee,et al.  Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic composites , 2010 .

[13]  N. Ayrilmis,et al.  Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones. , 2010, Bioresource technology.

[14]  P. Stefani,et al.  Medium-density particleboards from modified rice husks and soybean protein concentrate-based adhesives. , 2010, Bioresource technology.

[15]  A. Karimi,et al.  The effect of acetylated particle distribution and type of resin on physical and mechanical properties of poplar particleboard , 2011, European Journal of Wood and Wood Products.

[16]  N. Ayrilmis,et al.  Utilization of pine (Pinus pinea L.) cone in manufacture of wood based composite , 2009 .

[17]  Nadir Ayrilmis,et al.  Utilization of waste tire rubber in manufacture of oriented strandboard. , 2009, Waste management.

[18]  Samet Demirel,et al.  Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites. , 2009, Waste management.

[19]  Ruihong Zhang,et al.  Anaerobic digestion of saline creeping wild ryegrass for biogas production and pretreatment of particleboard material. , 2009, Bioresource technology.

[20]  Amir Nourbakhsh,et al.  Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials , 2008 .

[21]  G. Nemli,et al.  The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing. , 2008, Bioresource technology.

[22]  A. Aydın,et al.  Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait. , 2007 .

[23]  S. Hiziroglu,et al.  Some of the properties of particleboard made from paulownia , 2005, Journal of Wood Science.

[24]  E. Bilgili.  Stand development and fire behavior , 2003 .

[25]  A. Papadopoulos,et al.  The potential for using flax (Linum usitatissimum L.) shiv as a lignocellulosic raw material for particleboard , 2003 .

[26]  D. Kluchinski,et al.  Chemical Composition of Municipal Leaf Waste and Hand‐Collected Urban Leaf Litter , 1996 .