A distributed fiber optic sensor system for dike monitoring using Brillouin optical frequency domain analysis

We report on the development of a complete system for spatially resolved detection of critical soil displacement in river embankments. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain in silica optical fibers. Our development consists of the measurement unit, an adequate coating for the optical fibers and a technique to integrate the coated optical fibers into geotextiles as they are commonly used in dike construction. We present several laboratory and field tests that prove the capability of the system to detect areas of soil displacement as small as 2 meters. These are the first tests of truly distributed strain measurements on optical fibers embedded into geosynthetics.

[1]  Nicol A. Heron,et al.  Experimental and theoretical studies on a distributed temperature sensor based on Brillouin scattering , 1995 .

[2]  Johan Vlekken,et al.  Geodetect: a new step for the use of fibre Bragg grating technology in soil engineering , 2005, International Conference on Optical Fibre Sensors.

[3]  Govind P. Agrawal,et al.  Nonlinear Fiber Optics , 1989 .

[4]  K. Krebber,et al.  Dike monitoring using fiber sensor-based geosynthetics , 2007 .

[5]  Branko Glisic,et al.  Development of distributed strain and temperature sensing cables , 2005, International Conference on Optical Fibre Sensors.

[6]  R. Bernini,et al.  All frequency domain distributed fiber-optic Brillouin sensing , 2003 .

[7]  D. Garcus,et al.  Brillouin optical-fiber frequency-domain analysis for distributed temperature and strain measurements , 1997 .

[8]  Sylvia Jetschke,et al.  Averaging of Polarization Modulations in a Distributed Brillouin Fiber Sensor System , 1997 .

[9]  J. Koseki,et al.  Deformation measurement technology of geomembrane at controlled landfills using optical fiber sensors. , 2006 .

[10]  M. V. Deventer,et al.  Polarization properties of stimulated Brillouin scattering in single-mode fibers , 1994 .

[11]  David J. Webb,et al.  Transient response in high-resolution Brillouin-based distributed sensing using probe pulses shorter than the acoustic relaxation time. , 2000, Optics letters.

[12]  L. Thevenaz,et al.  Field tests of distributed temperature and strain measurement for smart structures , 2001, Technical Digest. CLEO/Pacific Rim 2001. 4th Pacific Rim Conference on Lasers and Electro-Optics (Cat. No.01TH8557).

[13]  Xiaoyi Bao,et al.  How to obtain high spectral resolution of SBS-based distributed sensing by using nanosecond pulses. , 2006, Optics express.

[14]  L. Thévenaz,et al.  Brillouin gain spectrum characterization in single-mode optical fibers , 1997 .

[15]  Tateo Sakurai,et al.  An application test using Brillouin optical correlation base analysis method for aircraft structural health monitoring , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  Branko Glisic,et al.  Integration of distributed strain and temperature sensors in composite coiled tubing , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[17]  Filippo Bastianini,et al.  Distributed Brillouin fiber optic strain monitoring applications in advanced composite materials , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[18]  L. Thévenaz,et al.  Simple distributed fiber sensor based on Brillouin gain spectrum analysis. , 1996, Optics letters.

[19]  A. Minardo,et al.  An accurate high-resolution technique for distributed sensing based on frequency-domain Brillouin scattering , 2006, IEEE Photonics Technology Letters.