Calibration Method for Angular Positioning Deviation of a High-Precision Rotary Table Based on the Laser Tracer Multi-Station Measurement System
暂无分享，去创建一个
Zhaoyao Shi | Bo Jiang | Yanqiang Sun | Huixu Song | Shuang Zhang | Hu Lin | Hongfang Chen | Zhaoyao Shi | Hongfang Chen | Shuang Zhang | Huixu Song | Yanqiang Sun | Hu-Wai Lin | Bo Jiang
[1] Robert Schmitt,et al. On-the-fly calibration of linear and rotary axes of machine tools and CMMs using a tracking interferometer , 2009 .
[2] Adam Gąska,et al. Verification of Articulated Arm Coordinate Measuring Machines Accuracy Using LaserTracer System as Standard of Length , 2016 .
[3] Liang Tang,et al. Uncertainty modeling of the spatial coordinate error correction system of the CMM based on laser tracer multi-station measurement , 2019, Measurement Science and Technology.
[4] Chien-Sheng Liu,et al. Identification and verification of location errors of rotary axes on five-axis machine tools by using a touch-trigger probe and a sphere , 2018, The International Journal of Advanced Manufacturing Technology.
[5] 李博 Li Bo,et al. Initial calibration of tracking turntable for vehicle-borne opto-electronic tracking system , 2013 .
[6] Zijian Qiao,et al. SVD principle analysis and fault diagnosis for bearings based on the correlation coefficient , 2015 .
[7] Sung-Chong Chung,et al. Method for measuring location errors using a touch trigger probe on four-axis machine tools , 2018 .
[8] H. Schwenke,et al. Error mapping of CMMs and machine tools by a single tracking interferometer , 2005 .
[9] Liang Fang,et al. A fault feature extraction method for rotating shaft with multiple weak faults based on underdetermined blind source signal , 2018, Measurement Science and Technology.