Flash sintering of barium titanate

[1]  Yan Yan,et al.  A strategy for obtaining high electrostrictive properties and its application in barium stannate titanate lead-free ferroelectrics , 2018, Ceramics International.

[2]  Y. Tsur,et al.  Recent Advances in Mechanism Research and Methods for Electric‐Field‐Assisted Sintering of Ceramics , 2018, Advanced materials.

[3]  V. Sglavo,et al.  Investigation of Electrochemical, Optical and Thermal Effects during Flash Sintering of 8YSZ , 2018, Materials.

[4]  Xin Zhang,et al.  Superior Energy Storage Performances of Polymer Nanocomposites via Modification of Filler/Polymer Interfaces , 2018 .

[5]  S. Grasso,et al.  Review of flash sintering: Materials, mechanisms and modelling , 2017 .

[6]  C. Dancer.  Flash sintering of ceramic materials , 2016 .

[7]  K. Sasaki,et al.  Formation of grain boundary second phase in BaTiO3 polycrystal under a high DC electric field at elevated temperatures , 2016 .

[8]  R. Chaim.  Liquid Film Capillary Mechanism for Densification of Ceramic Powders during Flash Sintering , 2016, Materials.

[9]  K. Sasaki,et al.  Enhancement of sintering rates in BaTiO 3 by controlling of DC electric current , 2015 .

[10]  R. S. Bonilla,et al.  Electrical characteristics of flash sintering: thermal runaway of Joule heating , 2015 .

[11]  I. Reaney,et al.  Effect of Li3PO4 addition on the sintering temperature, phase, microstructure, and electrical properties of BaTiO3 , 2015, Journal of Materials Science.

[12]  R. Raj,et al.  Field-assisted sintering of undoped BaTiO3: Microstructure evolution and dielectric permittivity , 2014 .

[13]  Y. Sakka,et al.  Densification behaviour and microstructural development in undoped yttria prepared by flash-sintering , 2014 .

[14]  R. Raj,et al.  The Effect of Electric Field on Sintering and Electrical Conductivity of Titania , 2014 .

[15]  R. Raj,et al.  Impedance Spectroscopy and Dielectric Properties of Flash Versus Conventionally Sintered Yttria‐Doped Zirconia Electroceramics Viewed at the Microstructural Level , 2013 .

[16]  R. Raj,et al.  Influence of the Field and the Current Limit on Flash Sintering at Isothermal Furnace Temperatures , 2013 .

[17]  M. Cologna,et al.  Flash Sintering of Anode–Electrolyte Multilayers for SOFC Applications , 2013 .

[18]  E. Muccillo,et al.  Densification and enhancement of the grain boundary conductivity of gadolinium-doped barium cerate by ultra fast flash grain welding , 2012 .

[19]  R. Raj.  Joule heating during flash-sintering , 2012 .

[20]  M. Cologna,et al.  Defect Structure of Flash‐Sintered Strontium Titanate , 2012 .

[21]  Zhenhua Wang,et al.  A novel sintering method to obtain fully dense gadolinia doped ceria by applying a direct current , 2012 .

[22]  M. Cologna,et al.  Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-doping , 2011 .

[23]  M. Cologna,et al.  Influence of Externally Imposed and Internally Generated Electrical Fields on Grain Growth, Diffusional Creep, Sintering and Related Phenomena in Ceramics , 2011 .

[24]  E. Muccillo,et al.  Flash grain welding in yttria stabilized zirconia , 2011 .

[25]  R. Waser,et al.  Synthesis, spark plasma sintering and electrical conduction mechanism in BaTiO3–Cu composites , 2011 .

[26]  M. Cologna,et al.  Flash-sintering of Co2MnO4 spinel for solid oxide fuel cell applications , 2011 .

[27]  M. Cologna,et al.  Flash‐Sintering of Cubic Yttria‐Stabilized Zirconia at 750°C for Possible Use in SOFC Manufacturing , 2011 .

[28]  R. Raj,et al.  A Huge Effect of Weak dc Electrical Fields on Grain Growth in Zirconia , 2009 .

[29]  S. Fu,et al.  Low temperature sintering and dielectric properties of BaTiO3 with glass addition , 2009 .

[30]  I. Chen,et al.  Grain-size effects on the hardness of nanograin BaTiO3 ceramics , 2008 .

[31]  X. Qi,et al.  Dielectric properties of fine-grained BaTiO3 prepared by spark-plasma-sintering , 2004 .

[32]  I. Chen,et al.  Sintering dense nanocrystalline ceramics without final-stage grain growth , 2000, Nature.

[33]  R. Waser,et al.  Advanced dielectrics: Bulk ceramics and thin films , 1991 .

[34]  I. Lin,et al.  Influence of stoichiometry on the microstructure and positive temperature coefficient of resistivity of semiconducting barium titanate ceramics , 1990 .

[35]  S. Risbud,et al.  Low-temperature synthesis and processing of electronic materials in the BaO-TiO2 system , 1990 .

[36]  M. Harmer,et al.  Compensating Defects in Highly Donor-Doped BaTiO3 , 1986 .

[37]  J. Haggerty,et al.  Surface Tensions of Alumina‐Containing Liquids , 1985 .

[38]  R. Coble.  Sintering Crystalline Solids. II. Experimental Test of Diffusion Models in Powder Compacts , 1961 .

[39]  P. Murray,et al.  A fundamental investigation of the mechanism of sintering , 1954 .

[40]  O. Guillon,et al.  Effect of Electrical Field/Current on Sintering of Fully Stabilized Zirconia , 2012 .

[41]  R. Raj,et al.  Flash-Sinterforging of Nanograin Zirconia: Field Assisted Sintering and Superplasticity , 2012 .

[42]  K. Niihara,et al.  Fabrication and characteristics of fine-grained BaTiO3 ceramics by spark plasma sintering , 2004 .

[43]  Suk‐Joong L. Kang,et al.  Dependence of Grain Growth and Grain-Boundary Structure on the Ba/Ti Ratio in BaTiO3 , 2004 .