Ring-Shaped Substrate Integrated Waveguide Wilkinson Power Dividers/Combiners

This paper proposes and presents a class of substrate integrated waveguide (SIW) power dividers/combiners based on a modified Wilkinson architecture. The proposed design consists of a ring-type circuit of 1.5 λg length with three waveguide ports. Impedance variation without affecting cutoff frequency and integration of isolation resistance are the two major limitations in connection with the design of SIW Wilkinson structures. Central ring part with different thickness ensures different impedance in the first proposed scheme while the half-mode SIW in the second option. As for the second limitation, the optimal configuration of integrating the isolation resistance is studied. A version without resistance is also examined using a broad-wall series slot. To validate the proposed concept, a bilayered circuit with standard Printed circuit board prototype was fabricated and measured. A table summarizing performances of all the proposed circuits shows a bandwidth of around 25% at the 10 dB reference. A negligible additional insertion loss is observed. The proposed design techniques are found useful at millimeter-wave frequencies where reduced physical dimensions make a circuit configuration suitable for low-cost implementation. This concept is also valid for rectangular waveguide counterparts.