Recent progress of silicon composites as anode materials for secondary batteries

Silicon is recognized as one of the most promising anode materials for lithium-ion batteries because of its extremely high theoretical capacity, low delithiation potential and abundant availability. However, Si experiences a huge volume expansion during lithiation and delithiation processes, which results in rapid capacity degradation and very poor cycling performance. Numerous studies have been conducted to circumvent these problems through the utilization of various silicon composite materials. Furthermore, suitable materials as well as proper design of nanostructures are a great challenge at this time. This review mainly focuses on the latest research achievements of Si composites and their nanostructures, including Si–carbon, Si–metal, Si–transition metal oxides and Si–polymer, which can improve the electrochemical performance of lithium-ion batteries effectively. In addition, the latest application of Si to other secondary batteries, such as sodium-ion batteries and magnesium-ion batteries is also included. Moreover, this review describes the remaining issues and future study directions.

[1]  Comparative computational study of the energetics of Li, Na, and Mg storage in amorphous and crystalline silicon , 2014, 1401.7795.

[2]  Liwei Lin,et al.  High Performance 3D Si/Ge Nanorods Array Anode Buffered by TiN/Ti Interlayer for Sodium‐Ion Batteries , 2015 .

[3]  Y. Mei,et al.  Self-supporting Si/Reduced Graphene Oxide nanocomposite films as anode for lithium ion batteries , 2011 .

[4]  D. T. Pham,et al.  Hollow carbon nanospheres/silicon/alumina core-shell film as an anode for lithium-ion batteries , 2015, Scientific Reports.

[5]  Jaephil Cho,et al.  Micron-sized Fe–Cu–Si ternary composite anodes for high energy Li-ion batteries , 2016 .

[6]  Feixiang Wu,et al.  Li-ion battery materials: present and future , 2015 .

[7]  Yi Cui,et al.  Improving the cycling stability of silicon nanowire anodes with conducting polymer coatings , 2012 .

[8]  Qin Hao,et al.  Si/Ag composite with bimodal micro-nano porous structure as a high-performance anode for Li-ion batteries. , 2015, Nanoscale.

[9]  Rana Mohtadi,et al.  Magnesium batteries: Current state of the art, issues and future perspectives , 2014, Beilstein journal of nanotechnology.

[10]  Thomas M. Higgins,et al.  A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes. , 2016, ACS nano.

[11]  Q. Xia,et al.  Engineered Si sandwich electrode: Si nanoparticles/graphite sheet hybrid on ni foam for next-generation high-performance lithium-ion batteries. , 2015, ACS applied materials & interfaces.

[12]  Yi Cui,et al.  Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control. , 2012, Nature nanotechnology.

[13]  Li-Jun Wan,et al.  Cu‐Si Nanocable Arrays as High‐Rate Anode Materials for Lithium‐Ion Batteries , 2011, Advanced materials.

[14]  Li-Jun Wan,et al.  Silicon-based nanomaterials for lithium-ion batteries , 2012 .

[15]  J. Jasinski,et al.  High rate and durable, binder free anode based on silicon loaded MoO3 nanoplatelets , 2015, Scientific Reports.

[16]  Qian Zhou,et al.  Enhancing electrochemical properties of silicon-graphite anodes by the introduction of cobalt for lithium-ion batteries , 2015 .

[17]  Qing Zhang,et al.  Ni–Si nanosheet network as high performance anode for Li ion batteries , 2015 .

[18]  O. Keles,et al.  SiAg film by magnetron sputtering for high reversible lithium ion storage anodes , 2016 .

[19]  Donghan Kim,et al.  Sodium‐Ion Batteries , 2013 .

[20]  Teófilo Rojo,et al.  Na-ion batteries, recent advances and present challenges to become low cost energy storage systems , 2012 .

[21]  Zaiping Guo,et al.  Si-based anode materials for lithium rechargeable batteries , 2010 .

[22]  Gerbrand Ceder,et al.  Electrode Materials for Rechargeable Sodium‐Ion Batteries: Potential Alternatives to Current Lithium‐Ion Batteries , 2012 .

[23]  Kenichiro Itami,et al.  Inside Cover: Thiophene‐Based, Radial π‐Conjugation: Synthesis, Structure, and Photophysical Properties of Cyclo‐1,4‐phenylene‐2′,5′‐thienylenes (Angew. Chem. Int. Ed. 1/2015) , 2015 .

[24]  J. Rogers,et al.  Arrays of sealed silicon nanotubes as anodes for lithium ion batteries. , 2010, Nano letters.

[25]  Hui Wu,et al.  Designing nanostructured Si anodes for high energy lithium ion batteries , 2012 .

[26]  Hua Zhang,et al.  Graphene-based composites. , 2012, Chemical Society reviews.

[27]  Yongsheng Chen,et al.  Pyrolytic carbon-coated Si nanoparticles on elastic graphene framework as anode materials for high-performance lithium-ion batteries , 2015 .

[28]  Otto Zhou,et al.  Alloy Formation in Nanostructured Silicon , 2001 .

[29]  D. Stevens,et al.  The Mechanisms of Lithium and Sodium Insertion in Carbon Materials , 2001 .

[30]  Takakazu Yamamoto.  Molecular assembly and properties of polythiophenes , 2010 .

[31]  Liquan Chen,et al.  Room-temperature stationary sodium-ion batteries for large-scale electric energy storage , 2013 .

[32]  Yang‐Kook Sun,et al.  A lithium-ion sulfur battery based on a carbon-coated lithium-sulfide cathode and an electrodeposited silicon-based anode. , 2014, ACS applied materials & interfaces.

[33]  Ryne P. Raffaelle,et al.  Carbon nanotubes for lithium ion batteries , 2009 .

[34]  O. Keles,et al.  Multi-layered Cu/Si nanorods and its use for lithium ion batteries , 2015 .

[35]  D. He,et al.  Copper nanorods supported phosphorus-doped silicon for lithium storage application , 2014 .

[36]  I. Honma,et al.  Lithium Storage in Ordered Mesoporous Carbon (CMK‐3) with High Reversible Specific Energy Capacity and Good Cycling Performance , 2003 .

[37]  B. Scrosati,et al.  Lithium batteries: Status, prospects and future , 2010 .

[38]  Wataru Murata,et al.  Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell , 2012 .

[39]  Anming Hu,et al.  Si-Based Anode Materials for Li-Ion Batteries: A Mini Review , 2014, Nano-Micro Letters.

[40]  Wenquan Lu,et al.  Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review , 2014 .

[41]  Ru‐Shi Liu,et al.  High specific capacity retention of graphene/silicon nanosized sandwich structure fabricated by continuous electron beam evaporation as anode for lithium-ion batteries , 2015 .

[42]  Yang-Kook Sun,et al.  Challenges facing lithium batteries and electrical double-layer capacitors. , 2012, Angewandte Chemie.

[43]  E. Uchaker,et al.  Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries , 2015, Science China Materials.

[44]  Guohua Chen,et al.  Improving the Electrochemical Performance of Si Nanoparticle Anode Material by Synergistic Strategies of Polydopamine and Graphene Oxide Coatings , 2015 .

[45]  Shengnian Wang,et al.  Foamed mesoporous carbon/silicon composite nanofiber anode for lithium ion batteries , 2015 .

[46]  Min Gyu Kim,et al.  High-performance silicon-based multicomponent battery anodes produced via synergistic coupling of multifunctional coating layers , 2015 .

[47]  P. Vadgama,et al.  Polypyrrole-based conducting polymers and interactions with biological tissues , 2006, Journal of The Royal Society Interface.

[48]  Qing Zhang,et al.  Copper–silicon core–shell nanotube arrays for free-standing lithium ion battery anodes , 2014 .

[49]  Francesco De Angelis,et al.  Review on recent progress of nanostructured anode materials for Li-ion batteries , 2014 .

[50]  Bo Liang,et al.  Silicon-based materials as high capacity anodes for next generation lithium ion batteries , 2014 .

[51]  Ji Wu,et al.  Preparation of porous Si and TiO2 nanofibres using a sulphur‐templating method for lithium storage , 2015 .

[52]  Soojin Park,et al.  Surface engineering of sponge-like silicon particles for high-performance lithium-ion battery anodes. , 2013, Physical chemistry chemical physics : PCCP.

[53]  Anubhav Jain,et al.  Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials , 2011 .

[54]  Yan‐Bing He,et al.  Multilayered silicon embedded porous carbon/graphene hybrid film as a high performance anode , 2015 .

[55]  Huixin Chen,et al.  A Peanut Shell Inspired Scalable Synthesis of Three-Dimensional Carbon Coated Porous Silicon Particles as an Anode for Lithium-Ion Batteries , 2015 .

[56]  Jun Liu,et al.  Sodium ion insertion in hollow carbon nanowires for battery applications. , 2012, Nano letters.

[57]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[58]  L. Nazar,et al.  Sodium and sodium-ion energy storage batteries , 2012 .

[59]  Doron Aurbach,et al.  Challenges in the development of advanced Li-ion batteries: a review , 2011 .

[60]  Xiaojing Yang,et al.  Sandwich-structural graphene-based metal oxides as anode materials for lithium-ion batteries , 2013 .

[61]  Yuyan Shao,et al.  Graphene-based electrochemical energy conversion and storage: fuel cells, supercapacitors and lithium ion batteries. , 2011, Physical chemistry chemical physics : PCCP.

[62]  Jong Won Chung,et al.  A Stretchable Graphitic Carbon/Si Anode Enabled by Conformal Coating of a Self‐Healing Elastic Polymer , 2016, Advanced materials.

[63]  O. Borodin,et al.  High rate and stable cycling of lithium metal anode , 2015, Nature Communications.

[64]  Christopher M Wolverton,et al.  Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries , 2012 .

[65]  Xiaodong Chen,et al.  Nanotubes: Mechanical Force‐Driven Growth of Elongated Bending TiO2‐based Nanotubular Materials for Ultrafast Rechargeable Lithium Ion Batteries (Adv. Mater. 35/2014) , 2014 .

[66]  J. Tarascon,et al.  Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries , 2000, Nature.

[67]  Y. Abu-Lebdeh,et al.  A high capacity silicon–graphite composite as anode for lithium-ion batteries using low content amorphous silicon and compatible binders , 2013 .

[68]  Aluminum doping improves the energetics of lithium, sodium, and magnesium storage in silicon: A first-principles study , 2014, 1407.0545.

[69]  Yi Cui,et al.  Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life. , 2011, Nano letters.

[70]  John B Goodenough,et al.  Evolution of strategies for modern rechargeable batteries. , 2013, Accounts of chemical research.

[71]  Hun‐Gi Jung,et al.  Three-dimensional silicon/carbon core-shell electrode as an anode material for lithium-ion batteries , 2014 .

[72]  M. Winter,et al.  Facile synthesis and lithium storage properties of a porous NiSi2/Si/carbon composite anode material for lithium-ion batteries. , 2015, ACS applied materials & interfaces.

[73]  D. Aurbach,et al.  A review of advanced and practical lithium battery materials , 2011 .

[74]  Doron Aurbach,et al.  The challenge of developing rechargeable magnesium batteries , 2014 .

[75]  Doron Aurbach,et al.  On the Way to Rechargeable Mg Batteries: The Challenge of New Cathode Materials† , 2010 .

[76]  Candace K. Chan,et al.  High-performance lithium battery anodes using silicon nanowires. , 2008, Nature nanotechnology.

[77]  Jae-Hun Kim,et al.  Li-alloy based anode materials for Li secondary batteries. , 2010, Chemical Society reviews.

[78]  Zhen Shen,et al.  Pyrolytic carbon-coated silicon/carbon nanofiber composite anodes for high-performance lithium-ion batteries , 2015 .

[79]  S. Jung,et al.  Atom-Level Understanding of the Sodiation Process in Silicon Anode Material. , 2014, The journal of physical chemistry letters.

[80]  O. Schmidt,et al.  Sandwich nanoarchitecture of Si/reduced graphene oxide bilayer nanomembranes for Li-ion batteries with long cycle life. , 2015, ACS nano.

[81]  Jaephil Cho,et al.  Novel design of ultra-fast Si anodes for Li-ion batteries: crystalline Si@amorphous Si encapsulating hard carbon. , 2014, Nanoscale.

[82]  C. Niu,et al.  Preparation of nanographite sheets supported Si nanoparticles by in situ reduction of fumed SiO2 with magnesium for lithium ion battery , 2015 .

[83]  Jianguo Huang,et al.  A nanofibrous polypyrrole/silicon composite derived from cellulose substance as the anode material for lithium-ion batteries. , 2015, Chemical communications.

[84]  M. Armand,et al.  Building better batteries , 2008, Nature.

[85]  Jing Sun,et al.  Enhanced electrochemical performances of silicon nanotube bundles anode coated with graphene layers , 2016 .

[86]  P. Novák,et al.  A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries , 2010 .

[87]  Xingcheng Xiao,et al.  Building sponge-like robust architectures of CNT–graphene–Si composites with enhanced rate and cycling performance for lithium-ion batteries , 2015 .

[88]  Chao-ying Wang,et al.  Effects of defect on the storage and diffusion of Na and Mg interstitials in Si anode , 2016 .

[89]  Deren Yang,et al.  Facile synthesis of uniform MWCNT@Si nanocomposites as high-performance anode materials for lithium-ion batteries , 2015 .

[90]  Soojin Park,et al.  Highly stable Si-based multicomponent anodes for practical use in lithium-ion batteries , 2012 .

[91]  Haoshen Zhou,et al.  Enhancing the performances of Li-ion batteries by carbon-coating: present and future. , 2012, Chemical communications.

[92]  Daniel Sharon,et al.  On the challenge of developing advanced technologies for electrochemical energy storage and conversion , 2014 .

[93]  G. Hwang,et al.  A Comparative First-Principles Study on Sodiation of Silicon, Germanium, and Tin for Sodium-Ion Batteries , 2015 .

[94]  T. Chen,et al.  Binder-free lithium ion battery electrodes made of silicon and pyrolized lignin , 2016 .

[95]  J. Muldoon,et al.  Quest for nonaqueous multivalent secondary batteries: magnesium and beyond. , 2014, Chemical reviews.

[96]  Seong‐Hyeon Hong,et al.  Facile synthesis of Si/TiO2 (anatase) core-shell nanostructured anodes for rechargeable Li-ion batteries , 2014 .

[97]  Mark N. Obrovac,et al.  Structural changes in silicon anodes during lithium insertion/extraction , 2004 .

[98]  J. Tu,et al.  Porous reduced graphene oxide sheet wrapped silicon composite fabricated by steam etching for lithium-ion battery application , 2015 .

[99]  Liquan Chen,et al.  The crystal structural evolution of nano-Si anode caused by lithium insertion and extraction at room temperature , 2000 .

[100]  Doron Aurbach,et al.  Mg rechargeable batteries: an on-going challenge , 2013 .

[101]  Wei-li Song,et al.  Highly uniform silicon nanoparticle/porous carbon nanofiber hybrids towards free-standing high-performance anodes for lithium-ion batteries , 2015 .

[102]  Seong‐Hyeon Hong,et al.  Reversible storage of Li-ion in nano-Si/SnO2 core–shell nanostructured electrode , 2013 .

[103]  Yu‐Guo Guo,et al.  Rational design of anode materials based on Group IVA elements (Si, Ge, and Sn) for lithium-ion batteries. , 2013, Chemistry, an Asian journal.

[104]  B. McCloskey,et al.  Lithium−Air Battery: Promise and Challenges , 2010 .

[105]  H. Moon,et al.  Electrochemical characteristics of a-Si thin film anode for Li-ion rechargeable batteries , 2004 .

[106]  P. Hagenmuller,et al.  Sur quelques nouvelles phases de formule NaxMnO2 (x ⩽ 1) , 1971 .

[107]  J. Lee,et al.  PROGRESS IN PREPARATION, PROCESSING AND APPLICATIONS OF POLYANILINE , 2009 .

[108]  Linda F Nazar,et al.  The emerging chemistry of sodium ion batteries for electrochemical energy storage. , 2015, Angewandte Chemie.

[109]  W. L. Worrell,et al.  A thermodynamic study of sodium-intercalated TaS2 and TiS2 , 1979 .

[110]  Sehee Lee,et al.  Optimized Silicon Electrode Architecture, Interface, and Microgeometry for Next‐Generation Lithium‐Ion Batteries , 2016, Advanced materials.

[111]  Kazi Ahmed,et al.  Silicon decorated cone shaped carbon nanotube clusters for lithium ion battery anodes. , 2014, Small.

[112]  Poulomi Roy,et al.  Nanostructured anode materials for lithium ion batteries , 2015 .

[113]  M. Kawaguchi,et al.  Intercalation of magnesium into a graphite-like layered material of composition BC2N. , 2012, Chemical communications.