Life cycle assessment of recycled concretes: A case study in southern Italy.

Concrete industry is responsible of the most significant contribution to the global warming due to the large amount of substances with environmental impacts produced during its entire life cycle (production process, construction, maintenance, dismantlement, and scrapping). The most important issue characterizing the concrete industry is related to the constant growth of consumption of natural aggregates. The purpose of the present research is to apply the standard protocol of life cycle assessment to 3 different concrete mixtures composed by wastes from construction and demolition (C&D), marble sludge and cement kiln dust (CDK) in order to compare the environmental and energy impacts. The main purpose is to analyze the potentials (capabilities/benefits) of recycled aggregate concrete. The proposed model analyses 37 recovery possible scenarios. The results were analyzed with the software SimaPro© and with the life cycle impact assessment method Eco Indicator 99. The results show how it is possible to decide for the optimal solution in order to reduce emissions and impacts due to the concrete production.

[1]  M. J. Goedkoop The Eco-Indicator 98 Explained , 1998 .

[2]  Raffaele Cioffi,et al.  Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: Technological assessment for the production of lightweight artificial aggregates. , 2015, Journal of hazardous materials.

[3]  Tao Ding,et al.  A closed-loop life cycle assessment of recycled aggregate concrete utilization in China. , 2016, Waste management.

[4]  Yoshikuni Yoshida,et al.  An Advanced Concrete Recycling Technology and its Applicability Assessment through Input-Output Analysis , 2005 .

[5]  Francisco José Colomer Mendoza,et al.  Application of inert wastes in the construction, operation and closure of landfills: Calculation tool. , 2017 .

[6]  I. Wernick,et al.  Modeling materials flow of waste concrete from construction and demolition wastes in Taiwan , 2002 .

[7]  Ravindra K. Dhir,et al.  Use of recycled concrete aggregate in high-strength concrete , 2000 .

[8]  Barbara Liguori,et al.  Recycled polyolefins waste as aggregates for lightweight concrete , 2016 .

[9]  Dina M. Sadek,et al.  Recycling of high volumes of cement kiln dust in bricks industry , 2017 .

[10]  Daniela Chiarello Fastofski,et al.  Sustainability analysis of housing developments through the Brazilian environmental rating system Selo Casa Azul , 2017 .

[11]  E. Sanyé-Mengual,et al.  Comparative LCA of recycled and conventional concrete for structural applications , 2013, The International Journal of Life Cycle Assessment.

[12]  Mukesh Limbachiya,et al.  Use of recycled concrete aggregate in fly-ash concrete , 2011 .

[13]  Bruno Luís Damineli,et al.  Measuring the eco-efficiency of cement use , 2010 .

[14]  Reginald B. H. Tan,et al.  The New International Standards for Life Cycle Assessment: ISO 14040 and ISO 14044 , 2006 .

[15]  Sébastien Lasvaux,et al.  Product-specific Life Cycle Assessment of ready mix concrete: Comparison between a recycled and an ordinary concrete , 2017 .

[16]  Marco Pepe,et al.  A Conceptual Model for Designing Recycled Aggregate Concrete for Structural Applications , 2015 .

[17]  Ravindra K. Dhir,et al.  SUITABILITY OF RECYCLED CONCRETE AGGREGATE FOR USE IN BS 5328 DESIGNATED MIXES. , 1999 .

[18]  Arpad Horvath,et al.  Life-cycle inventory analysis of concrete production: A critical review , 2014 .

[19]  Vivian W. Y Tam,et al.  Comparing the implementation of concrete recycling in the Australian and Japanese construction industries , 2009 .

[20]  J. de Brito,et al.  Mechanical properties of structural concrete containing very fine aggregates from marble cutting sludge , 2015 .

[21]  S. K. Bhattacharyya,et al.  Influence of field recycled coarse aggregate on properties of concrete , 2011 .

[22]  Tarun R. Naik,et al.  Sustainability of Concrete Construction , 2008 .

[23]  Liselotte Schebek,et al.  Closed-loop recycling of construction and demolition waste in Germany in view of stricter environmental threshold values , 2006, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[24]  Bambang Suhendro,et al.  Toward Green Concrete for Better Sustainable Environment , 2014 .

[25]  Ioanna Papayianni,et al.  Comparative life cycle assessment of concrete road pavements using industrial by-products as alternative materials , 2015 .

[26]  Marco Pepe Concrete Industry: Waste Generation and Environmental Concerns , 2015 .

[27]  Mary Ann Curran Life Cycle Assessment , 2016 .

[28]  Agnès Jullien,et al.  LCA allocation procedure used as an incitative method for waste recycling: An application to mineral additions in concrete , 2010 .

[29]  Mariano Angelo Zanini,et al.  Sustainable management and supply of natural and recycled aggregates in a medium-size integrated plant. , 2016, Waste management.

[30]  Raffaele Cioffi,et al.  Use of Cement Kiln Dust, Blast Furnace Slag and Marble Sludge in the Manufacture of Sustainable Artificial Aggregates by Means of Cold Bonding Pelletization , 2013, Materials.

[31]  Françoise Feugeas,et al.  Environmental evaluation of concrete made from recycled concrete aggregate implementing life cycle assessment , 2016 .

[32]  J. M. Gómez-Soberón Porosity of recycled concrete with substitution of recycled concrete aggregate: An experimental study , 2002 .

[33]  Rehan Sadiq,et al.  An overview of construction and demolition waste management in Canada: a lifecycle analysis approach to sustainability , 2013, Clean Technologies and Environmental Policy.

[34]  Sekhar Chandra Dutta,et al.  A critical review and assessment for usage of recycled aggregate as sustainable construction material , 2017 .

[35]  D. Huntzinger,et al.  A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies , 2009 .

[36]  K. E. Alyamaç,et al.  A preliminary concrete mix design for SCC with marble powders , 2009 .

[37]  J. de Brito,et al.  Durability performance of concrete made with fine recycled concrete aggregates , 2010 .

[38]  David Pennington,et al.  Recent developments in Life Cycle Assessment. , 2009, Journal of environmental management.

[39]  J. de Brito,et al.  Environmental life cycle assessment of coarse natural and recycled aggregates for concrete , 2018 .

[40]  Vivian W. Y Tam,et al.  Economic comparison of concrete recycling : a case study approach , 2008 .

[41]  I. Valverde-Palacios,et al.  Development of the life cycle inventory of masonry mortar made of natural and recycled aggregates , 2017 .

[42]  Xu Jincheng,et al.  Research and development of the object-oriented life cycle assessment database , 2001 .

[43]  Mingming Hu,et al.  An approach to LCSA: the case of concrete recycling , 2013, The International Journal of Life Cycle Assessment.

[44]  Valeria Corinaldesi,et al.  Use of synthetic fibers in self-compacting lightweight aggregate concretes , 2015 .

[45]  Cristiana Peano,et al.  Innovation strategies in a fruit growers association impacts assessment by using combined LCA and s-LCA methodologies. , 2016, The Science of the total environment.

[46]  Fabio De Felice,et al.  An environmental evaluation: A comparison between geopolymer and OPC concrete paving blocks manufacturing process in italy , 2016 .

[47]  A. Mladenovič,et al.  Environmental evaluation of green concretes versus conventional concrete by means of LCA. , 2015, Waste management.

[48]  Nele De Belie,et al.  Life Cycle Assessment of Completely Recyclable Concrete , 2014 .

[49]  Jelena Dragaš,et al.  Environmental assessment of green concretes for structural use , 2017 .

[50]  Raffaele Cioffi,et al.  Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy , 2017 .

[51]  Qiang Du,et al.  Concrete with recycled concrete aggregate and crushed clay bricks , 2011 .

[52]  J. Brito,et al.  Mechanical behaviour of concrete made with fine recycled concrete aggregates , 2007 .

[53]  P Claisse,et al.  Sustainable Cements and Concrete for the Climate Change Era - A Review , 2010 .

[54]  Tae Hyoung Kim,et al.  Proposal of Environmental Impact Assessment Method for Concrete in South Korea: An Application in LCA (Life Cycle Assessment) , 2016, International journal of environmental research and public health.

[55]  Balasingam Muhunthan,et al.  Engineering Properties of Cement Kiln Dust-Modified Soils in Western Washington State , 2011 .

[56]  Rita Gamberini,et al.  Waste treatment: an environmental, economic and social analysis with a new group fuzzy PROMETHEE approach , 2016, Clean Technologies and Environmental Policy.

[57]  Danielle Maia de Souza,et al.  Comparative life cycle assessment of ceramic brick, concrete brick and cast-in-place reinforced concrete exterior walls , 2016 .

[58]  J. de Brito,et al.  Definition of an equivalent functional unit for structural concrete incorporating recycled aggregates , 2016 .

[59]  Dingquan Xiao Sequent and accumulative life cycle assessment of materials and products , 2001 .

[60]  S Marinković,et al.  Comparative environmental assessment of natural and recycled aggregate concrete. , 2010, Waste management.

[61]  Carlo Ingrao,et al.  A comparative Life Cycle Assessment of external wall-compositions for cleaner construction solutions in buildings , 2016 .

[62]  R. Cioffi,et al.  Manufacture of artificial aggregate using MSWI bottom ash. , 2011, Waste management.

[63]  Darli Rodrigues Vieira,et al.  Life cycle assessment (LCA) applied to the manufacturing of common and ecological concrete: A review , 2016 .

[64]  Jorge de Brito,et al.  Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste , 2012 .

[65]  M. Batayneh,et al.  Use of selected waste materials in concrete mixes. , 2007, Waste management.

[66]  Holger Wallbaum,et al.  Environmental product declarations entering the building sector: critical reflections based on 5 to 10 years experience in different European countries , 2015, The International Journal of Life Cycle Assessment.

[67]  Raffaele Cioffi,et al.  Recycling of non-metallic automotive shredder residues and coal fly-ash in cold-bonded aggregates for sustainable concrete , 2017 .

[68]  Hanning Xiao,et al.  Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete , 2009 .

[69]  M Guo,et al.  LCA data quality: sensitivity and uncertainty analysis. , 2012, The Science of the total environment.