Challenges and opportunities of light olefin production via thermal and catalytic pyrolysis of end-of-life polyolefins: Towards full recyclability

[1]  Florence H. Vermeire,et al.  Thermochemical Recycling of End-of-life and Virgin HDPE: A Pilot-Scale Study , 2022, Journal of Analytical and Applied Pyrolysis.

[2]  Henrik Thunman,et al.  Fluidized bed steam cracking of rapeseed oil: exploring the direct production of the molecular building blocks for the plastics industry , 2022, Biomass Conversion and Biorefinery.

[3]  K. V. Van Geem,et al.  Multi-Scale Modeling of Plastic Waste Gasification: Opportunities and Challenges , 2022, Materials.

[4]  Tung M. Nguyen,et al.  Hydrodemetallization of heavy oil: Recent progress, challenge, and future prospects , 2022, Journal of Petroleum Science and Engineering.

[5]  Y. De Vos,et al.  Development of an Active and Mechanically Stable Catalyst for the Oxidative Coupling of Methane in a Gas–Solid Vortex Reactor , 2022, Industrial & Engineering Chemistry Research.

[6]  Rajesh N. Patel,et al.  A Critical Review on Solid Waste Treatment using Plasma Pyrolysis Technology , 2022, Chemical Engineering and Processing - Process Intensification.

[7]  N. Abatzoglou,et al.  Recent Advances in the Decontamination and Upgrading of Waste Plastic Pyrolysis Products: An Overview , 2022, Processes.

[8]  Dadi V. Suriapparao,et al.  A Review on Role of Process Parameters on Pyrolysis of Biomass and Plastics: Present Scope and Future Opportunities in Conventional and Microwave-Assisted Pyrolysis Technologies , 2022, Process Safety and Environmental Protection.

[9]  Arthur J. Ragauskas,et al.  Polyethylene Upcycling to Fuels: Narrowing the Carbon Number Distribution in N-Alkanes by Tandem Hydropyrolysis/Hydrocracking , 2022, SSRN Electronic Journal.

[10]  A. Inayat,et al.  Enhancing aromatics and olefins yields in thermo-catalytic pyrolysis of LDPE over zeolites: Role of staged catalysis and acid site density of HZSM-5 , 2022, Fuel.

[11]  K. V. Van Geem,et al.  A comprehensive experimental investigation of plastic waste pyrolysis oil quality and its dependence on the plastic waste composition , 2022, Fuel Processing Technology.

[12]  J. Dewulf,et al.  Expanding the collection portfolio of plastic packaging: Impact on quantity and quality of sorted plastic waste fractions , 2022, Resources, Conservation and Recycling.

[13]  R. Varghese,et al.  Highly selective conversion of mixed polyolefins to valuable base chemicals using phosphorus-modified and steam-treated mesoporous HZSM-5 zeolite with minimal carbon footprint , 2022, Applied Catalysis B: Environmental.

[14]  R. Ruan,et al.  A review on catalytic pyrolysis of plastic wastes to high-value products , 2022, Energy Conversion and Management.

[15]  M. F. A. Patah,et al.  A review of microwave pyrolysis as a sustainable plastic waste management technique. , 2021, Journal of environmental management.

[16]  K. V. Van Geem,et al.  Assessing the feasibility of chemical recycling via steam cracking of untreated plastic waste pyrolysis oils: Feedstock impurities, product yields and coke formation. , 2022, Waste management.

[17]  Ningbo Gao,et al.  Analysis of hydrogen production potential from waste plastics by pyrolysis and in line oxidative steam reforming , 2022, Fuel Processing Technology.

[18]  Maarten R. Dobbelaere,et al.  Bayesian Tuned Kinetic Monte Carlo Modeling of Polystyrene Pyrolysis: Unraveling the Pathways to Monomer, Dimers, and Trimers of Polystyrene , 2022, SSRN Electronic Journal.

[19]  Maarten R. Dobbelaere,et al.  Active learning-based exploration of the catalytic pyrolysis of plastic waste , 2022, Fuel.

[20]  Jae Goo Lee,et al.  High temperature flash pyrolysis characteristics of waste plastics (SRF) in a bubbling fluidized bed: Effect of temperature and pelletizing , 2022, Fuel.

[21]  L. Pinard,et al.  Zeolite shape selectivity impact on LDPE and PP catalytic pyrolysis products and coke nature , 2022, Sustainable Energy & Fuels.

[22]  R. Varghese,et al.  Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste , 2022 .

[23]  K. V. Van Geem,et al.  Opportunities and challenges for the application of post-consumer plastic waste pyrolysis oils as steam cracker feedstocks: To decontaminate or not to decontaminate? , 2021, Waste management.

[24]  I. Choi,et al.  Catalytic hydrocracking of heavy wax from pyrolysis of plastic wastes using Pd/Hβ for naphtha-ranged hydrocarbon production , 2021, Journal of Analytical and Applied Pyrolysis.

[25]  R. Hasanzadeh,et al.  Polyethylene waste gasification syngas analysis and multi-objective optimization using central composite design for simultaneous minimization of required heat and maximization of exergy efficiency , 2021, Energy Conversion and Management.

[26]  R. Varghese,et al.  Boron-Modified Mesoporous ZSM-5 for the Conversion of Pyrolysis Vapors from LDPE and Mixed Polyolefins: Maximizing the C2–C4 Olefin Yield with Minimal Carbon Footprint , 2021, ACS Sustainable Chemistry & Engineering.

[27]  Haoquan Hu,et al.  Pyrolysis behavior of low-density polyethylene over HZSM-5 via rapid infrared heating. , 2021, The Science of the total environment.

[28]  M. Ghadiri,et al.  The pyrolysis of oak with polyethylene, polypropylene and polystyrene using fixed bed and stirred reactors and TGA instrument , 2021 .

[29]  K. Goulas,et al.  Syngas Production from Polyolefins in a Semi‐batch Reactor System , 2021, AIChE Journal.

[30]  U. R. Sumaila,et al.  How COVID-19 Could Change the Economics of the Plastic Recycling Sector , 2021, Recycling.

[31]  W. Kaminsky.  Chemical recycling of plastics by fluidized bed pyrolysis , 2021 .

[32]  T. Richards,et al.  Gaseous products from primary reactions of fast plastic pyrolysis , 2021 .

[33]  A. Chopra,et al.  Thermochemical Recycling of Waste Plastics by Pyrolysis: A Review , 2021, Energy & Fuels.

[34]  Paul Chen,et al.  Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production , 2021 .

[35]  Bingxi Li,et al.  Pyrolysis of plastic species: a review of resources and products , 2021 .

[36]  Zhenming Xu,et al.  An energy-saving and environment-friendly technology for debromination of plastic waste: Novel models of heat transfer and movement behavior of bromine. , 2021, Journal of hazardous materials.

[37]  G. Lopez,et al.  Progress on Catalyst Development for the Steam Reforming of Biomass and Waste Plastics Pyrolysis Volatiles: A Review , 2021, Energy & fuels : an American Chemical Society journal.

[38]  J. Dewulf,et al.  Moving from linear to circular household plastic packaging in Belgium: Prospective life cycle assessment of mechanical and thermochemical recycling , 2021 .

[39]  Yagyadatta Goswami,et al.  Inherent roadmap of conversion of plastic waste into energy and its life cycle assessment: A frontrunner compendium , 2021, Renewable and Sustainable Energy Reviews.

[40]  Zaidoon M. Shakor,et al.  Thermal and catalytic cracking of plastic waste: a review , 2021, International Journal of Environmental Analytical Chemistry.

[41]  M. Manero,et al.  Deactivation and Regeneration of Zeolite Catalysts Used in Pyrolysis of Plastic Wastes—A Process and Analytical Review , 2021, Catalysts.

[42]  Thomas H. Epps,et al.  Single Pot Catalyst Strategy to Branched Products via Adhesive Isomerization and Hydrocracking of Polyethylene over Platinum Tungstated Zirconia , 2021, Applied Catalysis B: Environmental.

[43]  D. Bikiaris,et al.  Aging effects on low- and high-density polyethylene, polypropylene and polystyrene under UV irradiation: an insight into decomposition mechanism by Py-GC/MS for microplastic analysis , 2021 .

[44]  G. Lopez,et al.  Conversion of HDPE into Value Products by Fast Pyrolysis Using FCC Spent Catalysts in a Fountain Confined Conical Spouted Bed Reactor , 2021, ChemSusChem.

[45]  J. Lange.  Towards circular carbo-chemicals – the metamorphosis of petrochemicals , 2021, Energy & Environmental Science.

[46]  G. Marin,et al.  Biomass fast pyrolysis in an innovative gas-solid vortex reactor: Experimental proof of concept , 2021, Journal of Analytical and Applied Pyrolysis.

[47]  P. A. Jensen,et al.  A perspective on catalytic hydropyrolysis of biomass , 2021, Renewable and Sustainable Energy Reviews.

[48]  B. Weckhuysen,et al.  Plastic Waste Conversion over a Refinery Waste Catalyst , 2021, Angewandte Chemie.

[49]  Roberta Olindo,et al.  Life Cycle Assessments on Battery Electric Vehicles and Electrolytic Hydrogen: The Need for Calculation Rules and Better Databases on Electricity , 2021, Sustainability.

[50]  S. Duquesne,et al.  Recycling of plastic waste using flash pyrolysis – Effect of mixture composition , 2021, Polymer Degradation and Stability.

[51]  Dagmar R. D’hooge,et al.  The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions , 2021 .

[52]  Jingyang Jiang,et al.  An economic analysis of twenty light olefin production pathways , 2021 .

[53]  G. Marin,et al.  CFD-based assessment of steady-state multiplicity in a gas-solid vortex reactor for oxidative coupling of methane , 2021 .

[54]  H. Ngo,et al.  Environmental impacts and greenhouse gas emissions assessment for energy recovery and material recycle of the wastewater treatment plant. , 2021, The Science of the total environment.

[55]  M. McManus,et al.  Developments in the life cycle assessment of chemical recycling of plastic waste – A review , 2021 .

[56]  Jechan Lee,et al.  Waste-to-Fuels: Pyrolysis of Low-Density Polyethylene Waste in the Presence of H-ZSM-11 , 2021, Polymers.

[57]  D. Vlachos,et al.  Plastic waste to fuels by hydrocracking at mild conditions , 2021, Science Advances.

[58]  F. Weiland,et al.  Aspects of chemical recycling of complex plastic waste via the gasification route. , 2021, Waste management.

[59]  F. Gholami,et al.  A Review on Production of Light Olefins via Fluid Catalytic Cracking , 2021, Energies.

[60]  A. Azapagic,et al.  Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery. , 2021, The Science of the total environment.

[61]  Yang Fan,et al.  Deactivation of a Y-zeolite based catalyst with coke evolution during the catalytic pyrolysis of polyethylene for fuel oil , 2021 .

[62]  T. Ligthart,et al.  Plastic recycling in a circular economy; determining environmental performance through an LCA matrix model approach. , 2021, Waste management.

[63]  G. Lopez,et al.  The pyrolysis study of polybutadiene rubber under different structural and process parameters: comparison with polyvinyl chloride degradation , 2021, Journal of Thermal Analysis and Calorimetry.

[64]  G. Marin,et al.  An assessment of electrified methanol production from an environmental perspective , 2021, Green Chemistry.

[65]  G. Karmakar.  Regeneration and Recovery of Plastics , 2020, Reference Module in Materials Science and Materials Engineering.

[66]  Thomas H. Epps,et al.  Virtual Congressional Education Briefing: End of Life for Bioplastics , 2020 .

[67]  J. Dewulf,et al.  Development and application of a predictive modelling approach for household packaging waste flows in sorting facilities. , 2020, Waste management.

[68]  D. Patle,et al.  Pyrolysis of waste polyethylene under vacuum using zinc oxide , 2020, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[69]  G. Lopez,et al.  CeO2 and La2O3 Promoters in the Steam Reforming of Polyolefinic Waste Plastic Pyrolysis Volatiles on Ni-Based Catalysts , 2020 .

[70]  Yang Li,et al.  Carbon black enhanced wood-plastic composites for high-performance electromagnetic interference shielding , 2020 .

[71]  A. Dumoulin,et al.  Towards a better understanding of odor removal from post-consumer plastic film waste: A kinetic study on deodorization efficiencies with different washing media. , 2020, Waste management.

[72]  J. M. Serra,et al.  Simulation-assisted design of a catalytic hydrogenation reactor for plastic pyrolysis fuels , 2020, Fuel.

[73]  S. Van Passel,et al.  Economic performance of pyrolysis of mixed plastic waste: Open-loop versus closed-loop recycling , 2020 .

[74]  R. Sheldon,et al.  Green chemistry and the plastic pollution challenge: towards a circular economy , 2020, Green Chemistry.

[75]  M. Shaver,et al.  Mechanical Recycling of Packaging Plastics: A Review. , 2020, Macromolecular rapid communications.

[76]  J. Dewulf,et al.  A detailed analysis of the composition of selected plastic packaging waste products and its implications for mechanical and thermochemical recycling. , 2020, Environmental science & technology.

[77]  K. Polychronopoulou,et al.  Synthesis and performance evaluation of hydrocracking catalysts: A review , 2020, Journal of Industrial and Engineering Chemistry.

[78]  N. Themelis,et al.  Selective production of aromatics from waste plastic pyrolysis by using sewage sludge derived char catalyst , 2020 .

[79]  M. Arabiourrutia,et al.  Waste tyre valorization by catalytic pyrolysis – A review , 2020 .

[80]  E. Koda,et al.  The Influence of the Accelerated Aging Conditions on the Properties of Polyolefin Geogrids Used for Landfill Slope Reinforcement , 2020, Polymers.

[81]  W. Peukert,et al.  Thermal rounding of micron-sized polymer particles in a downer reactor: direct vs indirect heating , 2020 .

[82]  Aitor García-Pablos,et al.  Elutriation, attrition and segregation in a conical spouted bed with a fountain confiner , 2020 .

[83]  U. Henriksen,et al.  Counteracting Rapid Catalyst Deactivation by Concomitant Temperature Increase during Catalytic Upgrading of Biomass Pyrolysis Vapors Using Solid Acid Catalysts , 2020, Catalysts.

[84]  Zhilin Chen,et al.  Thermal Stability and Flame Resistance of the Coextruded Wood-Plastic Composites Containing Talc-Filled Plastic Shells , 2020, International Journal of Polymer Science.

[85]  Qifang Li,et al.  Formation and Emissions of Volatile Organic Compounds from Homo-PP and Co-PP Resins during Manufacturing Process and Accelerated Photoaging Degradation , 2020, Molecules.

[86]  José Manuel Barat Baviera,et al.  Review and priority setting for substances that are listed without a specific migration limit in Table 1 of Annex 1 of Regulation 10/2011 on plastic materials and articles intended to come into contact with food , 2020, EFSA journal. European Food Safety Authority.

[87]  T. Compernolle,et al.  The effect of waste incineration taxation on industrial plastic waste generation: A panel analysis , 2020 .

[88]  Antonio O. S. Silva,et al.  Kinetic study of thermocatalytic degradation of UHMWPE over microporous and hierarchical ZSM-23 zeolite , 2020, Applied Catalysis B: Environmental.

[89]  Youri Yang,et al.  Biodegradation of polyethylene: a brief review , 2020, Applied Biological Chemistry.

[90]  Animesh Dutta,et al.  A study on potential recovery of energy and value-added chemicals from in-situ pyrolysis of Bambusa balcooa over basic metal oxides , 2020 .

[91]  J. M. Serra,et al.  Characterization and Distillation of Pyrolysis Liquids Coming from Polyolefins Segregated of MSW for Their Use as Automotive Diesel Fuel , 2020 .

[92]  M. Usman,et al.  Composite zeolite beta catalysts for catalytic hydrocracking of plastic waste to liquid fuels , 2020, Materials for Renewable and Sustainable Energy.

[93]  Robin J. White,et al.  Beyond Mechanical Recycling: Giving New Life to Plastic Waste , 2020, Angewandte Chemie.

[94]  J. Bilbao,et al.  Coke formation and deactivation during catalytic reforming of biomass and waste pyrolysis products: A review , 2020 .

[95]  K. Góra-Marek,et al.  The proximity of aluminium atoms influences the reaction pathway of ethanol transformation over zeolite ZSM-5 , 2020, Communications Chemistry.

[96]  Wenlu Liu,et al.  Chemical Recycling of Plastics by Microwave‐Assisted High‐Temperature Pyrolysis , 2020, Global challenges.

[97]  S. Silveira,et al.  Technologies for chemical recycling of household plastics - A technical review and TRL assessment. , 2020, Waste management.

[98]  A. Arpornwichanop,et al.  Gasification of plastic waste for synthesis gas production , 2020 .

[99]  Joo-Sik Kim,et al.  Two-stage pyrolysis of polystyrene: Pyrolysis oil as a source of fuels or benzene, toluene, ethylbenzene, and xylenes , 2020 .

[100]  K. V. Van Geem,et al.  Challenges and opportunities of solvent-based additive extraction methods for plastic recycling. , 2020, Waste management.

[101]  S. Limtrakul,et al.  Scaling of a catalytic cracking fluidized bed downer reactor based on computational fluid dynamics simulations , 2020, RSC advances.

[102]  G. Huber,et al.  The Chemistry and Kinetics of Polyethylene Pyrolysis: A Feedstock to Produce Fuels and Chemicals. , 2020, ChemSusChem.

[103]  N. Miskolczi,et al.  Value added hydrocarbons obtained by pyrolysis of contaminated waste plastics in horizontal tubular reactor: In situ upgrading of the products by chlorine capture , 2019 .

[104]  M. Lemos,et al.  A catalytic reactive distillation approach to high density polyethylene pyrolysis – Part 1 – Light olefin production , 2019 .

[105]  M. Mastellone.  A feasibility assessment of an integrated plastic waste system adopting mechanical and thermochemical conversion processes , 2019 .

[106]  Jesse J. Williams,et al.  An Overview of Light Olefins Production via Steam Enhanced Catalytic Cracking , 2019, Catalysis Surveys from Asia.

[107]  Xi Yu,et al.  Parametric analysis of biomass fast pyrolysis in a downer fluidized bed reactor , 2019, Renewable Energy.

[108]  Biswajit Ruj,et al.  Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization , 2019 .

[109]  C. I. Idumah,et al.  Novel trends in plastic waste management , 2019, SN Applied Sciences.

[110]  Joo-Sik Kim,et al.  Activator-assisted pyrolysis of polypropylene , 2019, Applied Energy.

[111]  O. Muraza,et al.  Stable Boron-Modified ZSM-22 Zeolite Catalyst for Selective Production of Propylene from Methanol , 2019, Energy & Fuels.

[112]  M. Ghadiri,et al.  Effect of Different Process Parameters on the Pyrolysis of Iranian Oak Using a Fixed Bed Reactor and TGA Instrument , 2019, Energy & Fuels.

[113]  Paul T. Williams,et al.  Influence of catalyst bed temperature and properties of zeolite catalysts on pyrolysis-catalysis of a simulated mixed plastics sample for the production of upgraded fuels and chemicals , 2019, Journal of the Energy Institute.

[114]  Shasha Liu,et al.  Catalytic microwave-assisted pyrolysis of plastic waste over NiO and HY for gasoline-range hydrocarbons production , 2019, Energy Conversion and Management.

[115]  N. Srivastava,et al.  Non-biodegradable polymeric waste pyrolysis for energy recovery , 2019, Heliyon.

[116]  G. Marin,et al.  An experimental and numerical study of the suppression of jets, counterflow, and backflow in vortex units , 2019, AIChE Journal.

[117]  N. Dintcheva,et al.  Anti-/Pro-Oxidant Behavior of Naturally Occurring Molecules in Polymers and Biopolymers: A Brief Review , 2019, ACS Sustainable Chemistry & Engineering.

[118]  M. Méndez-Rojas,et al.  High yield and simple one-step production of carbon black nanoparticles from waste tires , 2019, Heliyon.

[119]  A. Antelava,et al.  Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management , 2019, Environmental Management.

[120]  W. Zhou,et al.  New horizon in C1 chemistry: breaking the selectivity limitation in transformation of syngas and hydrogenation of CO2 into hydrocarbon chemicals and fuels. , 2019, Chemical Society reviews.

[121]  Hsien Hui Khoo,et al.  LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore , 2019, Resources, Conservation and Recycling.

[122]  Xinggui Zhou,et al.  Fabricating ZSM-23 with reduced aspect ratio through ball-milling and recrystallization: Synthesis, structure and catalytic performance in N-heptane hydroisomerization , 2019, Catalysis Today.

[123]  Guy B. Marin,et al.  Making chemicals with electricity , 2019, Science.

[124]  Ib Chorkendorff,et al.  Electrified methane reforming: A compact approach to greener industrial hydrogen production , 2019, Science.

[125]  B. Chalermsinsuwan,et al.  Circulating turbulent fluidized bed regime on flow regime diagram , 2019, Powder Technology.

[126]  M. Tazerout,et al.  Study of the effects of regeneration of USY zeolite on the catalytic cracking of polyethylene , 2019, Applied Catalysis B: Environmental.

[127]  S. Al-Salem,et al.  Study of the degradation profile for virgin linear low-density polyethylene (LLDPE) and polyolefin (PO) plastic waste blends , 2019, Journal of Material Cycles and Waste Management.

[128]  R. Vijver,et al.  The role of mass and heat transfer in the design of novel reactors for oxidative coupling of methane , 2019, Chemical Engineering Science.

[129]  K. Góra-Marek,et al.  Desilicated zeolite BEA for the catalytic cracking of LDPE: the interplay between acidic sites' strength and accessibility , 2019, Catalysis Science & Technology.

[130]  Mark E. Davis,et al.  Cage-Defining Ring: A Molecular Sieve Structural Indicator for Light Olefin Product Distribution from the Methanol-to-Olefins Reaction , 2019, ACS Catalysis.

[131]  Robert S. Weber,et al.  The economics of numbering up a chemical process enterprise , 2019, Journal of Advanced Manufacturing and Processing.

[132]  B. Ruj,et al.  Thermal degradation of waste plastics under non-sweeping atmosphere: Part 1: Effect of temperature, product optimization, and degradation mechanism. , 2019, Journal of environmental management.

[133]  Joo-Sik Kim,et al.  Characteristics of a new type continuous two-stage pyrolysis of waste polyethylene , 2019, Energy.

[134]  N. Miskolczi,et al.  Preparation and application of metal loaded ZSM-5 and y-zeolite catalysts for thermo-catalytic pyrolysis of real end of life vehicle plastics waste , 2017, Journal of the Energy Institute.

[135]  Qiang Lu,et al.  Catalytic Pyrolysis of Biomass and Polymer Wastes , 2018, Catalysts.

[136]  Steffen H. Symoens,et al.  State-of-the-art of Coke Formation during Steam Cracking: Anti-Coking Surface Technologies , 2018, Industrial & Engineering Chemistry Research.

[137]  M. Usman,et al.  Catalytic hydropyrolysis of a model municipal waste plastic mixture over composite USY/SBA-16 catalysts , 2018, Journal of Analytical and Applied Pyrolysis.

[138]  N. Miskolczi,et al.  Kinetic identification of plastic waste pyrolysis on zeolite-based catalysts , 2018, Energy Conversion and Management.

[139]  C. Bastiaansen,et al.  Drawing behavior and mechanical properties of ultra-high molecular weight polyethylene blends with a linear polyethylene wax , 2018, Polymer.

[140]  A. Heidarinasab,et al.  The effect of temperature, heating rate, initial cross-linking and zeolitic catalysts as key process and structural parameters on the degradation of natural rubber (NR) to produce the valuable hydrocarbons , 2018, Journal of Analytical and Applied Pyrolysis.

[141]  M. Irfan,et al.  Hydrocracking of virgin and waste plastics: A detailed review , 2018, Renewable and Sustainable Energy Reviews.

[142]  S. Kær,et al.  Thermodynamic analysis of steam reforming and oxidative steam reforming of propane and butane for hydrogen production , 2018, International Journal of Hydrogen Energy.

[143]  Kumar Anubhav Tiwari,et al.  Identification and Characterization of Defects in Glass Fiber Reinforced Plastic by Refining the Guided Lamb Waves , 2018, Materials.

[144]  Johnathan E. Holladay,et al.  Modularized production of fuels and other value‐added products from distributed, wasted, or stranded feedstocks , 2018, WIREs Energy and Environment.

[145]  Xinsheng Li,et al.  Theoretical studies on bond dissociation enthalpies for model compounds of typical plastic polymers , 2018, IOP Conference Series: Earth and Environmental Science.

[146]  G. Stefanidis,et al.  Direct methane-to-ethylene conversion in a nanosecond pulsed discharge , 2018, Fuel.

[147]  A. Roesyadi,et al.  Zn-Mo/HZSM-5 Catalyst for Gasoil Range Hydrocarbon Production by Catalytic Hydrocracking of Ceiba pentandra oil , 2018 .

[148]  O. Muraza,et al.  Hydrothermally stable acid-modified ZSM-22 zeolite for selective propylene production via steam-assisted catalytic cracking of n-hexane , 2018 .

[149]  C. A. Henriques,et al.  Petrochemical feedstock from pyrolysis of waste polyethylene and polypropylene using different catalysts , 2018 .

[150]  Roland Weber,et al.  An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling. , 2018, Journal of hazardous materials.

[151]  G. Lopez,et al.  Recent advances in the gasification of waste plastics. A critical overview , 2018 .

[152]  G. Lopez,et al.  Valorisation of different waste plastics by pyrolysis and in-line catalytic steam reforming for hydrogen production , 2018 .

[153]  Roland Clift,et al.  A life cycle assessment data analysis toolkit for the design of novel processes – A case study for a thermal cracking process for mixed plastic waste , 2018 .

[154]  M. Bartoli,et al.  Microwave assisted pyrolysis of halogenated plastics recovered from waste computers. , 2017, Waste management.

[155]  K. S. Zhansakova,et al.  Study of the effect of carbon black pigment grades on properties of polypropylene-based composites , 2018 .

[156]  Sherif L. Abdelaziz,et al.  Heating-freezing effects on the orientation of kaolin clay particles , 2017 .

[157]  Kevin Van Geem,et al.  Design and cold flow testing of a Gas-Solid Vortex Reactor demonstration unit for biomass fast pyrolysis , 2017 .

[158]  Kim Ragaert,et al.  Mechanical and chemical recycling of solid plastic waste. , 2017, Waste management.

[159]  R. Cossu,et al.  PLASMIX management: LCA of six possible scenarios. , 2017, Waste management.

[160]  A. Roesyadi,et al.  Hydrocracking of Non-edible Vegetable Oils with Co-Ni/HZSM-5 Catalyst to Gasoil Containing Aromatics , 2017 .

[161]  V. Santos,et al.  Conversion of Synthesis Gas to Light Olefins: Impact of Hydrogenation Activity of Methanol Synthesis Catalyst on the Hybrid Process Selectivity over Cr–Zn and Cu–Zn with SAPO-34 , 2017 .

[162]  Bilge Yilmaz,et al.  Engineering Zeolites for Catalytic Cracking to Light Olefins , 2017 .

[163]  Po-Chun Chen,et al.  A Review on Production, Characterization, and Photocatalytic Applications of TiO2 Nanoparticles and Nanotubes , 2017 .

[164]  M. Artetxe,et al.  Deactivation dynamics of a Ni supported catalyst during the steam reforming of volatiles from waste polyethylene pyrolysis , 2017 .

[165]  S M Al-Salem,et al.  A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). , 2017, Journal of environmental management.

[166]  A. Santos,et al.  Polyethylene catalytic cracking by thermogravimetric analysis , 2017, Journal of Thermal Analysis and Calorimetry.

[167]  R. Geyer,et al.  Production, use, and fate of all plastics ever made , 2017, Science Advances.

[168]  Patrick A. Johnston,et al.  Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics , 2017 .

[169]  G. Lopez,et al.  Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review , 2017 .

[170]  S. Juliastuti,et al.  Microwave pyrolysis of multilayer plastic waste (LDPE) using zeolite catalyst , 2017 .

[171]  C. Boisson,et al.  Polyolefins, a Success Story , 2017, Polymers.

[172]  M. Birkett,et al.  Low temperature tensile lap-shear testing of adhesively bonded polyethylene pipe , 2017 .

[173]  Lionel Estel,et al.  Continuous flow-microwave reactor: Where are we , 2017 .

[174]  Yi Weiming,et al.  Effects of calcium carbonate on preparation and mechanical properties of wood/plastic composite , 2017 .

[175]  A. Klerk,et al.  Nitrogen Removal from Oil: A Review , 2017 .

[176]  Saad A. Al-Bogami,et al.  Crude oil to chemicals: light olefins from crude oil , 2017 .

[177]  D. King,et al.  Advances in Catalysis for Syngas Conversion to Hydrocarbons , 2017 .

[178]  P. Cnudde,et al.  Effect of temperature and branching on the nature and stability of alkene cracking intermediates in H-ZSM-5 ☆ , 2017 .

[179]  G. Marin,et al.  CFD-assisted Process Intensification for biomass fast pyrolysis in Gas-Solid Vortex Reactor technology , 2017 .

[180]  Yun Yu,et al.  Formation of styrene monomer, dimer and trimer in the primary volatiles produced from polystyrene pyrolysis in a wire-mesh reactor , 2016 .

[181]  G. Lopez,et al.  A sequential process for hydrogen production based on continuous HDPE fast pyrolysis and in-line steam reforming , 2016 .

[182]  Karl O. Albrecht,et al.  Steam reforming of fast pyrolysis-derived aqueous phase oxygenates over Co, Ni, and Rh metals supported on MgAl2O4 , 2016 .

[183]  C. Engtrakul,et al.  Effect of ZSM-5 acidity on aromatic product selectivity during upgrading of pine pyrolysis vapors , 2016 .

[184]  S. Dutta,et al.  β-Alkyl Elimination: Fundamental Principles and Some Applications. , 2016, Chemical reviews.

[185]  F. Abnisa,et al.  A review on pyrolysis of plastic wastes , 2016 .

[186]  Gregor Wernet,et al.  The ecoinvent database version 3 (part I): overview and methodology , 2016, The International Journal of Life Cycle Assessment.

[187]  Xiaolian Liu,et al.  Direct and Highly Selective Conversion of Synthesis Gas into Lower Olefins: Design of a Bifunctional Catalyst Combining Methanol Synthesis and Carbon-Carbon Coupling. , 2016, Angewandte Chemie.

[188]  Jing Sun,et al.  Review on Microwave-Matter Interaction Fundamentals and Efficient Microwave-Associated Heating Strategies , 2016, Materials.

[189]  Q. Fu,et al.  Selective conversion of syngas to light olefins , 2016, Science.

[190]  Tavengwa Bunhu,et al.  Potential uses and value-added products derived from waste polystyrene in developing countries: A review , 2016 .

[191]  L. Sun,et al.  Thermal degradation of PVC: A review. , 2016, Waste management.

[192]  K. Aishwarya,et al.  Microwave Assisted Pyrolysis of Plastic Waste , 2016 .

[193]  G. Marin,et al.  Numerical investigation of process intensification of biomass fast pyrolysis in a gas-solid vortex reactor , 2016 .

[194]  Rafael García,et al.  Catalytic cracking of LDPE over nanocrystalline HZSM-5 zeolite prepared by seed-assisted synthesis from an organic-template-free system , 2016 .

[195]  S. Harvey,et al.  Thermochemical recycling of plastics for production of chemical intermediates at a Swedish chemical complex site , 2016 .

[196]  G. Marin,et al.  Design of a gas-solid vortex reactor demonstration unit for the fast pyrolysis of lignocellulosic biomass , 2016 .

[197]  Weimin Yang,et al.  Recent advances of pore system construction in zeolite-catalyzed chemical industry processes. , 2015, Chemical Society reviews.

[198]  B. M. Weckhuysen,et al.  Fluid catalytic cracking: recent developments on the grand old lady of zeolite catalysis , 2015, Chemical Society reviews.

[199]  R. Behbahani,et al.  Study of coke deposition phenomena on the SAPO_34 catalyst and its effects on light olefin selectivity during the methanol to olefin reaction , 2015 .

[200]  A. Kelkar,et al.  Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor , 2015 .

[201]  R. Xiao,et al.  Catalytic pyrolysis of black-liquor lignin by co-feeding with different plastics in a fluidized bed reactor. , 2015, Bioresource technology.

[202]  Gang Yu,et al.  Maximizing carbon efficiency of petrochemical production from catalytic co-pyrolysis of biomass and plastics using gallium-containing MFI zeolites , 2015 .

[203]  Abdolreza Samimi,et al.  Experimental and statistical assessments of the mechanical strength reliability of gamma alumina catalyst supports , 2015 .

[204]  R. Vinu,et al.  Resource recovery via catalytic fast pyrolysis of polystyrene using zeolites , 2015 .

[205]  Paul T. Williams,et al.  Catalytic pyrolysis of waste plastic from electrical and electronic equipment , 2015 .

[206]  J. Gonzalez-Gutierrez,et al.  Processability and mechanical properties of extensively recycled high density polyethylene , 2015 .

[207]  A. Jensen,et al.  Steam reforming of cyclic model compounds of bio-oil over Ni-based catalysts: Product distribution and carbon formation , 2015 .

[208]  Aaron Akah,et al.  Maximizing propylene production via FCC technology , 2015, Applied Petrochemical Research.

[209]  D. Serrano,et al.  Hydroreforming of the oils from LDPE thermal cracking over Ni–Ru and Ru supported over hierarchical Beta zeolite , 2015 .

[210]  Paul T. Williams,et al.  Products from the high temperature pyrolysis of RDF at slow and rapid heating rates , 2015 .

[211]  Steffen Heidenreich,et al.  New concepts in biomass gasification , 2015 .

[212]  Jianliang Wang,et al.  Projection of world fossil fuels by country , 2015 .

[213]  Paul T. Williams,et al.  Polycyclic aromatic hydrocarbons (PAH) formation from the pyrolysis of different municipal solid waste fractions. , 2015, Waste management.

[214]  A. T. Yuliansyah,et al.  PYROLYSIS OF PLASTIC WASTE TO PRODUCE PYROLYTIC OIL AS AN ALTERNATIVE FUEL , 2015 .

[215]  M. Yulianto,et al.  Temperature Distribution of the Plastics Pyrolysis Process to Produce Fuel at 450oC , 2015 .

[216]  Chanathip Pharino,et al.  Evaluation of emission and reduction of greenhouse gases from upstream petrochemical industry in Thailand , 2015 .

[217]  Bilal Akash,et al.  Thermochemical Depolymerization of Biomass , 2015, ANT/SEIT.

[218]  Haritz Altzibar,et al.  Development of a dual conical spouted bed system for heat integration purposes , 2014 .

[219]  T. Abdullah,et al.  Study on Dissolution of Low Density Polyethylene (LDPE) , 2014 .

[220]  S. Komarneni,et al.  Optimizing the distribution of aromatic products from catalytic fast pyrolysis of cellulose by ZSM-5 modification with boron and co-feeding of low-density polyethylene , 2014 .

[221]  G. Lopez,et al.  Kinetic modelling of the cracking of HDPE pyrolysis volatiles on a HZSM-5 zeolite based catalyst , 2014 .

[222]  A. McDonald,et al.  Evaluation of pyrolysis process parameters on polypropylene degradation products , 2014 .

[223]  J. Towfighi,et al.  Comparative study of naphtha cracking over SAPO-34 and HZSM-5: Effects of cerium and zirconium on the catalytic performance , 2014 .

[224]  G. Lopez,et al.  Identification of the coke deposited on an HZSM-5 zeolite catalyst during the sequenced pyrolysis–cracking of HDPE , 2014 .

[225]  Mario Grosso,et al.  Environmental evaluation of plastic waste management scenarios , 2014 .

[226]  R. Xiao,et al.  Catalytic Co-pyrolysis of Biomass and Different Plastics (Polyethylene, Polypropylene, and Polystyrene) To Improve Hydrocarbon Yield in a Fluidized-Bed Reactor , 2014 .

[227]  Susanne B. Jones,et al.  A review and perspective of recent bio-oil hydrotreating research , 2014 .

[228]  P. Frediani,et al.  Efficient disposal of waste polyolefins through microwave assisted pyrolysis , 2014 .

[229]  Paul T. Williams.  Pyrolysis of waste tyres: a review. , 2013, Waste management.

[230]  G. Lopez,et al.  Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity , 2013 .

[231]  Onwughara Innocent Nkwachukwu,et al.  Focus on potential environmental issues on plastic world towards a sustainable plastic recycling in developing countries , 2013, International Journal of Industrial Chemistry.

[232]  Ramón Murillo,et al.  Waste tyre pyrolysis – A review , 2013 .

[233]  Phil Coates,et al.  Thermal optimisation of polymer extrusion using in-process monitoring techniques , 2013 .

[234]  H. Yeganeh,et al.  Evaluation of pyrolysis product of virgin high density polyethylene degradation using different process parameters in a stirred reactor , 2013 .

[235]  M. Farid,et al.  Microwave Pyrolysis of Plastic , 2013 .

[236]  H. Yeganeh,et al.  Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins , 2012 .

[237]  Kohei Kubo,et al.  Ultra-high steaming stability of Cu-ZSM-5 zeolite as naphtha cracking catalyst to produce light olefin , 2012 .

[238]  Javier Bilbao,et al.  Production of Light Olefins from Polyethylene in a Two-Step Process: Pyrolysis in a Conical Spouted Bed and Downstream High-Temperature Thermal Cracking , 2012 .

[239]  M. Artetxe,et al.  Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed , 2012 .

[240]  Javier Bilbao,et al.  Light olefins from HDPE cracking in a two-step thermal and catalytic process , 2012 .

[241]  I. Álava,et al.  Sand attrition in conical spouted beds , 2012 .

[242]  T. Tago,et al.  Kinetics of n-hexane cracking over ZSM-5 zeolites : Effect of crystal size on effectiveness factor and catalyst lifetime , 2012 .

[243]  Francisco Passamonti,et al.  Recycling of waste plastics into fuels. LDPE conversion in FCC , 2012 .

[244]  D. Serrano,et al.  Developing Advanced Catalysts for the Conversion of Polyolefinic Waste Plastics into Fuels and Chemicals , 2012 .

[245]  A. Dalai,et al.  Thermodynamic equilibrium analysis of ring opening of decalin , 2012 .

[246]  I. Marco,et al.  Catalytic stepwise pyrolysis of packaging plastic waste , 2012 .

[247]  H. Yeganeh,et al.  The effect of temperature, catalyst, different carrier gases and stirrer on the produced transportation hydrocarbons of LLDPE degradation in a stirred reactor , 2012 .

[248]  Umberto Arena,et al.  Process and technological aspects of municipal solid waste gasification. A review. , 2012, Waste management.

[249]  Kyong-Hwan Lee.  Pyrolysis of Waste Polystyrene and High-Density Polyethylene , 2012 .

[250]  J. Weitkamp.  Catalytic Hydrocracking—Mechanisms and Versatility of the Process , 2012 .

[251]  M. Artetxe,et al.  Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor , 2012 .

[252]  B. R. Jagirdar,et al.  Nanocatalysis and prospects of green chemistry. , 2012, ChemSusChem.

[253]  J. Andrew,et al.  Carbon Disclosures: Comparability, the Carbon Disclosure Project and the Greenhouse Gas Protocol , 2011 .

[254]  T. Tatsumi,et al.  Facile control of crystallite size of ZSM-5 catalyst for cracking of hexane , 2011 .

[255]  A. Cunha,et al.  Study of the degradation mechanisms of polyethylene during reprocessing , 2011 .

[256]  Ramin Karimzadeh,et al.  Catalytic cracking of hydrocarbons over modified ZSM-5 zeolites to produce light olefins: A review , 2011 .

[257]  G. Lopez,et al.  Product Yields and Compositions in the Continuous Pyrolysis of High-Density Polyethylene in a Conical Spouted Bed Reactor , 2011 .

[258]  J. Bilbao,et al.  Insights into the coke deposited on HZSM-5, Hβ and HY zeolites during the cracking of polyethylene , 2011 .

[259]  G. Lopez,et al.  Role of pore structure in the deactivation of zeolites (HZSM-5, Hβ and HY) by coke in the pyrolysis of polyethylene in a conical spouted bed reactor , 2011 .

[260]  M. Coote,et al.  Revising the mechanism of polymer autooxidation. , 2011, Organic & biomolecular chemistry.

[261]  Yong Geng,et al.  The potential environmental gains from recycling waste plastics: simulation of transferring recycling and recovery technologies to Shenyang, China. , 2011, Waste management.

[262]  Chi-Ming Lee,et al.  Hydrocarbon fuels produced by catalytic pyrolysis of hospital plastic wastes in a fluidizing cracking process , 2010 .

[263]  G. Nagy,et al.  Production of steam cracking feedstocks by mild cracking of plastic wastes , 2010 .

[264]  Jessica F. Green.  Private Standards in the Climate Regime: The Greenhouse Gas Protocol , 2010 .

[265]  S. Kersten,et al.  Pyrolysis oil upgrading by high pressure thermal treatment , 2010 .

[266]  T. Corrales,et al.  Photodegradation of polyethylenes: Comparative effect of Fe and Ca-stearates as pro-oxidant additives , 2010 .

[267]  Young‐Kwon Park,et al.  Catalytic degradation of high-density polyethylene over SAPO-34 synthesized with various templates , 2010 .

[268]  Maria Laura Mastellone,et al.  Fluidized bed gasification of waste-derived fuels. , 2010, Waste management.

[269]  S. Kawauchi,et al.  Key role of the pore volume of zeolite for selective production of propylene from olefins. , 2010, Physical chemistry chemical physics : PCCP.

[270]  P. Canu,et al.  Two-steps selective thermal depolymerization of polyethylene. 1: Feasibility and effect of devolatilization heating policy , 2010 .

[271]  Hsien Hui Khoo,et al.  Food waste conversion options in Singapore: environmental impacts based on an LCA perspective. , 2010, The Science of the total environment.

[272]  Rahul Singh,et al.  Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective , 2010 .

[273]  F. Wei,et al.  HEXENE CATALYTIC CRACKING OVER 30% SAPO-34 CATALYST FOR PROPYLENE MAXIMIZATION: INFLUENCE OF REACTION CONDITIONS AND REACTION PATHWAY EXPLORATION , 2009 .

[274]  Paul T. Williams,et al.  Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time , 2009 .

[275]  T. Baba,et al.  Influence of Si distribution in framework of SAPO-34 and its particle size on propylene selectivity and production rate for conversion of ethylene to propylene. , 2009, Physical chemistry chemical physics : PCCP.

[276]  Javier Pérez-Ramírez,et al.  Desilication of ferrierite zeolite for porosity generation and improved effectiveness in polyethylene pyrolysis , 2009 .

[277]  G. Papageorgiou,et al.  Recycling of polymers from plastic packaging materials using the dissolution–reprecipitation technique , 2009 .

[278]  Linda J. Broadbelt,et al.  Detailed mechanistic modeling of high-density polyethylene pyrolysis: Low molecular weight product evolution , 2009 .

[279]  G. Lopez,et al.  Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor , 2009 .

[280]  P. Gijsman.  Review on the thermo-oxidative degradation of polymers during processing and in service , 2008 .

[281]  J. Seo,et al.  The Effect of Comonomers on the Foaming Characteristics of Polypropylene , 2008 .

[282]  D. Serrano,et al.  Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review , 2008 .

[283]  P. Steve Chum,et al.  Olefin polymer technologies—History and recent progress at The Dow Chemical Company , 2008 .

[284]  J. Encinar,et al.  Pyrolysis of synthetic polymers and plastic wastes. Kinetic study , 2008 .

[285]  F. Hasan,et al.  Biological degradation of plastics: a comprehensive review. , 2008, Biotechnology advances.

[286]  Yong Jin,et al.  Downer reactor: From fundamental study to industrial application , 2008 .

[287]  P. Gaca,et al.  Catalytic Degradation of Polyethylene over Mesoporous Molecular Sieve MCM-41 Modified with Heteropoly Compounds , 2008 .

[288]  M. R. Khan,et al.  Hydrocarbon Desulfurization to Clean Fuels by Selective Oxidation Versus Conventional Hydrotreating , 2007 .

[289]  P. Williams,et al.  Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures , 2007 .

[290]  A. Lappas,et al.  Chemical Recycling of Polystyrene by Pyrolysis: Potential Use of the Liquid Product for the Reproduction of Polymer , 2007 .

[291]  Jinsen Gao,et al.  Effects of large pore zeolite additions in the catalytic pyrolysis catalyst on the light olefins production , 2007 .

[292]  A. Marcilla,et al.  Catalytic pyrolysis of low density polyethylene over H-β, H-Y, H-Mordenite, and H-Ferrierite zeolite catalysts: Influence of acidity and structures , 2007 .

[293]  A. Marcilla,et al.  Catalytic flash pyrolysis of HDPE in a fluidized bed reactor for recovery of fuel-like hydrocarbons , 2007 .

[294]  X. Meng,et al.  Effect of steam on heavy oil catalytic pyrolysis , 2007 .

[295]  A. Marcilla,et al.  Effect of the temperature in the nature and extension of the primary and secondary reactions in the thermal and HZSM-5 catalytic pyrolysis of HDPE , 2007 .

[296]  A. Marcilla,et al.  Catalytic cracking of low-density polyethylene over H-Beta and HZSM-5 zeolites: Influence of the external surface. Kinetic model , 2007 .

[297]  G. San Miguel,et al.  Catalytic activity of zeolitic and mesostructured catalysts in the cracking of pure and waste polyolefins , 2007 .

[298]  László Bartha,et al.  High Energy Containing Fractions from Plastic Wastes by Their Chemical Recycling , 2006 .

[299]  Sung‐Seen Choi,et al.  Pyrolysis paths of polybutadiene depending on pyrolysis temperature , 2006 .

[300]  Guy Marin,et al.  Single-Event MicroKinetics for coke formation in catalytic cracking , 2005 .

[301]  Susan E. Barrows,et al.  Understanding Rotation about a C=C Double Bond , 2005 .

[302]  A. Marcilla,et al.  Effect of regeneration temperature and time on the activity of HUSY and HZSM5 zeolites during the catalytic pyrolysis of polyethylene , 2005 .

[303]  Rafael García,et al.  Catalytic cracking of HDPE over hybrid zeolitic-mesoporous materials , 2005 .

[304]  Longya Xu,et al.  Catalytic cracking of C4 alkenes to propene and ethene : Influences of zeolites pore structures and Si/Al2 ratios , 2005 .

[305]  Y. Lin,et al.  Fluidised bed pyrolysis of polypropylene over cracking catalysts for producing hydrocarbons , 2005 .

[306]  Angela N. García,et al.  Study of the gases obtained in thermal and catalytic flash pyrolysis of HDPE in a fluidized bed reactor , 2005 .

[307]  A. Marcilla,et al.  HZSM5 and HUSY deactivation during the catalytic pyrolysis of polyethylene , 2004 .

[308]  S. M. Sadrameli,et al.  Analytical representations of experimental polyethylene pyrolysis yields , 2004 .

[309]  M. Ger,et al.  Catalytic degradation of high density polyethylene over mesoporous and microporous catalysts in a fluidised-bed reactor , 2004 .

[310]  D. Serrano,et al.  Thermal and catalytic cracking of a LDPE–EVA copolymer mixture , 2003 .

[311]  Masa-aki Suzuki,et al.  Semiquantitative analysis of the thermal degradation of polypropylene , 2003 .

[312]  Jean-Paul Lange,et al.  Sustainable development: efficiency and recycling in chemicals manufacturing , 2002 .

[313]  Qiang Zhang,et al.  Downer Catalytic Pyrolysis (DCP): A Novel Process for Light Olefins Production , 2002 .

[314]  S. Ali,et al.  Polymer waste recycling over used catalysts , 2002 .

[315]  Rainer Reimert,et al.  Classification of volatile products from the temperature-programmed pyrolysis of polypropylene (PP), atactic-polypropylene (APP) and thermogravimetrically derived kinetics of pyrolysis , 2002 .

[316]  P. García,et al.  Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time , 2002 .

[317]  K. Miura,et al.  Catalytic pyrolysis of γ-irradiated polypropylene (PP) over HY-zeolite for enhancing the reactivity and the product selectivity , 2002 .

[318]  D. Tassios,et al.  The selective dissolution/precipitation technique for polymer recycling : a pilot unit application , 2001 .

[319]  A. Muto,et al.  Removal of organic chlorine compounds by catalytic dehydrochlorination for the refinement of municipal waste plastic derived oil , 2001 .

[320]  Elias Klemm,et al.  Catalytic degradation of polyethylene using thermal gravimetric analysis and a cycled-spheres-reactor , 2001 .

[321]  Jerzy Walendziewski,et al.  Thermal and catalytic conversion of waste polyolefines , 2001 .

[322]  Linda J. Broadbelt,et al.  Detailed mechanistic modeling of polymer degradation : application to polystyrene , 2001 .

[323]  F. Wang.  Polymer additive analysis by pyrolysis-gas chromatography. IV. Antioxidants. , 2000, Journal of chromatography. A.

[324]  M. Mastellone,et al.  Defluidization phenomena during the pyrolysis of two plastic wastes , 2000 .

[325]  Abdullah M. Aitani,et al.  Maximization of FCC light olefins by high severity operation and ZSM-5 addition , 2000 .

[326]  B. Gates,et al.  The Haag–Dessau mechanism of protolytic cracking of alkanes☆ , 2000 .

[327]  A. Corma,et al.  Current views on the mechanism of catalytic cracking , 2000 .

[328]  Joachim Werther,et al.  Catalyst Attrition in Fluidized Bed Systems , 2000 .

[329]  George Manos,et al.  Catalytic Degradation of High-Density Polyethylene over Different Zeolitic Structures , 2000 .

[330]  A. Corma,et al.  Tertiary recycling of polypropylene by catalytic cracking in a semibatch stirred reactor , 2000 .

[331]  F. Berruti,et al.  Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor , 1999 .

[332]  Anthony V. Bridgwater,et al.  Principles and practice of biomass fast pyrolysis processes for liquids , 1999 .

[333]  N. Allen,et al.  Evaluation of novel 4,4-dimethyloxazolidine derivatives as thermal and UV stabilisers in linear low density polyethylene (LLDPE) film , 1999 .

[334]  A. Garforth,et al.  Conversion of Polyethylene into Gasoline-Range Fuels by Two-Stage Catalytic Degradation Using Silica−Alumina and HZSM-5 Zeolite , 1999 .

[335]  Paul N. Sharratt,et al.  Production of hydrocarbons by catalytic degradation of high density polyethylene in a laboratory fluidised-bed reactor , 1998 .

[336]  J. Kuipers,et al.  Recycling of polyethene and polypropene in a novel bench-scale rotating cone reactor by high temperature pyrolysis. , 1998 .

[337]  S. Senkan,et al.  Suppression of Coke Formation in the Steam Cracking of Alkanes: Ethane and Propane , 1998 .

[338]  Robert L. White,et al.  Effects of catalyst acidity and HZSM‐5 channel volume on polypropylene cracking , 1998 .

[339]  Paul N. Sharratt,et al.  Investigation of the Catalytic Pyrolysis of High-Density Polyethylene over a HZSM-5 Catalyst in a Laboratory Fluidized-Bed Reactor , 1997 .

[340]  C. Papaspyrides,et al.  Recycling of polypropylene by the dissolution/reprecipitation technique: I. A model study , 1997 .

[341]  I. Wender.  Reactions of synthesis gas , 1996 .

[342]  N. Aust,et al.  Molecular Characterization of Polyolefins , 1996 .

[343]  F. Berruti,et al.  Ultrapyrolytic cracking of polyethylene — a high yield recycling method , 1996 .

[344]  J. S. Buchanan,et al.  Mechanistic considerations in acid-catalyzed cracking of olefins , 1996 .

[345]  Hsiaotao Bi,et al.  Flow regime diagrams for gas-solid fluidization and upward transport , 1995 .

[346]  W. Kaminsky,et al.  Olefins from polyolefins and mixed plastics by pyrolysis , 1995 .

[347]  Angela N. García,et al.  Pyrolysis of Polyethylene in a Fluidized Bed Reactor , 1994 .

[348]  B. Gates,et al.  Monomolecular and bimolecular mechanisms of paraffin cracking: n-Butane cracking catalyzed by HZSM-5 , 1992 .

[349]  W. Haag,et al.  Kinetics and Mechanism of Paraffin Cracking with Zeolite Catalysts , 1991 .

[350]  R. Fricke,et al.  Catalytic and infrared spectroscopic investigations of the molecular sieve types SAPO-34 and SAPO-11 , 1991 .

[351]  J. Lacoste,et al.  Polyethylene hydroperoxide decomposition products , 1991 .

[352]  Gilbert F. Froment,et al.  Kinetic modeling of the thermal cracking of hydrocarbons. 1. Calculation of frequency factors , 1988 .

[353]  J. Lunsford,et al.  Acid catalysis by dealuminated zeolite Y. 2. The roles of aluminum , 1986 .

[354]  J. Perram,et al.  Polymer fracture—A simple model for chain scission , 1984 .

[355]  D. Golden,et al.  Hydrocarbon Bond Dissociation Energies , 1983 .

[356]  S. Yuen,et al.  Metal oxide-support interactions in silica-supported iron oxide catalysts probed by nitric oxide adsorption , 1982 .

[357]  I. Wender.  Chemicals production directly from synthesis gas , 1980 .

[358]  N. Schwartz,et al.  The effect of heating rate on the thermal degradation of polybutadiene , 1978 .