PCV(Positive Crankcase Ventilation) 밸브 최적화 설계
暂无分享,去创建一个
In the development of new automobiles, the efforts to reduce environmental problems like air pollution have been risen. Blowby gas consists of about 20~35% of total amount of Hydrocarbon (HC), one of dangerous pollutants issuing from automobiles. A PCV valve is a very small component in an automotive engine but it is a very important part. Because that a PCV valve is used to control blowby gas and to recirculate it into a manifold automatically. Although it has very simple operating principle, designing a PCV valve is so difficult due to interaction between fluid and solid. In this study, our purpose is to develop a design program for a PCV valve and to verify its efficiency. Both Bernoulli equation and 4th order Runge-Kutta method were adopted to predict spool displacements and flow patterns. Comparing with experiments, it was found that both spool diameters and displacements were predicted well, however, flow rates showed a little differences because of the assumption of non viscous flow.
[1] 오세종,et al. 밸브 디스크 시트 마모에 따른 누설 특성연구 , 2004 .
[2] 최경호,et al. 연락공 형상에 따른 와류실식 디젤기관의 유동 특성 수치해석 , 2005 .