Load mitigation for a barge-type floating offshore wind turbine via inerter-based passive structural control

Abstract This paper investigates the application of inerter to a barge-type floating offshore wind turbine for the purpose of mitigating loads of the wind turbine structures induced by wind and wave. An inerter-based structural control system, consisting of a parallel connection of a spring, a damper, and an inerter-based network, is proposed. A nonlinear aeroelastic simulation tool for wind turbines called FAST-SC is employed for evaluating the performances of the inerter-based structural control system. Due to the inefficiency of implementing FAST-SC in optimizing the element parameters (spring stiffnesses, damping coefficients, inertances), a time-efficient parameter optimization method is proposed based on a simplified linear design model, where a mixed performance objective function including the tower-top fore-aft deflection and the TMD working space is minimized with respect to the element parameters. It is shown that there exists a tradeoff between the tower-top fore-aft deflection and the TMD working space. Moreover, numerical simulations based on the nonlinear FAST-SC code show that the overall performance can be improved by using an inerter, except the tower-top fore-aft load and the TMD working space. The inerter-based configurations tend to demand more TMD working space than the system with no inerter. Furthermore, it is demonstrated that the overall performance can be improved while maintaining similar TMD working space as the system with no inerter.

[1]  Xiao-Ping Zhang,et al.  Small signal stability analysis and control of the wind turbine with the direct-drive permanent magnet generator integrated to the grid , 2009 .

[2]  David J. Wagg,et al.  Vibration suppression of cables using tuned inerter dampers , 2016 .

[3]  Fu-Cheng Wang,et al.  Performance Benefits in Passive Vehicle Suspensions Employing Inerters , 2004 .

[4]  Michael Z. Q. Chen,et al.  Performance evaluation for inerter-based dynamic vibration absorbers , 2015 .

[5]  Mario A. Rotea,et al.  Passive structural control of offshore wind turbines , 2011 .

[6]  Zhiwei Gao,et al.  Pitch control for wind turbine systems using optimization, estimation and compensation , 2016 .

[7]  Shengyuan Xu,et al.  Semiactive Inerter and Its Application in Adaptive Tuned Vibration Absorbers , 2017, IEEE Transactions on Control Systems Technology.

[8]  Michele Zilletti,et al.  Feedback control unit with an inerter proof-mass electrodynamic actuator , 2016 .

[9]  Michael Z. Q. Chen,et al.  Active structural control for load mitigation of wind turbines via adaptive sliding-mode approach , 2017, J. Frankl. Inst..

[10]  Chang Xu,et al.  The collection of the main issues for wind farm optimisation in complex terrain , 2016 .

[11]  M.C. Smith,et al.  The missing mechanical circuit element , 2009, IEEE Circuits and Systems Magazine.

[12]  Mario A. Rotea,et al.  Structural control of floating wind turbines , 2011 .

[13]  F-C Wang,et al.  Building suspensions with inerters , 2010 .

[14]  Yinlong Hu,et al.  Influence of inerter on natural frequencies of vibration systems , 2014 .

[15]  Malcolm C. Smith,et al.  Restricted Complexity Network Realizations for Passive Mechanical Control , 2009, IEEE Transactions on Automatic Control.

[16]  Yinlong Hu,et al.  Analysis and optimisation for inerter-based isolators via fixed-point theory and algebraic solution , 2015 .

[17]  Kai Wang,et al.  Supplementary Material to: Realization of Three-port Spring Networks with Inerter for Effective Mechanical Control , 2015, 1510.06936.

[18]  Malcolm C. Smith.  Synthesis of mechanical networks: the inerter , 2002, IEEE Trans. Autom. Control..

[19]  Fu-Cheng Wang,et al.  Stability and performance analysis of a full-train system with inerters , 2012 .

[20]  Matthew A. Lackner,et al.  The impact of passive tuned mass dampers and wind–wave misalignment on offshore wind turbine loads , 2014 .

[21]  Kaoru Yamamoto,et al.  Bounded Disturbance Amplification for Mass Chains with Passive Interconnection , 2016, IEEE Transactions on Automatic Control.

[22]  Yaqi Hu,et al.  Active structural control of a floating wind turbine with a stroke-limited hybrid mass damper , 2017 .

[23]  Oya Mercan,et al.  Investigations of the application of gyro-mass dampers with various types of supplemental dampers for vibration control of building structures , 2016 .

[24]  Hamid Reza Karimi,et al.  Modelling and optimization of a passive structural control design for a spar-type floating wind turbine , 2014 .

[25]  Matthew A. Lackner,et al.  Controlling Platform Motions and Reducing Blade Loads for Floating Wind Turbines , 2009 .

[26]  Matthew Lackner,et al.  Offshore Wind Turbine Load Reduction Employing Optimal Passive Tuned Mass Damping Systems , 2013, IEEE Transactions on Control Systems Technology.

[27]  Yinlong Hu,et al.  Comfort-oriented vehicle suspension design with skyhook inerter configuration , 2017 .

[28]  Guanrong Chen,et al.  Performance Benefits of Using Inerter in Semiactive Suspensions , 2015, IEEE Transactions on Control Systems Technology.

[29]  Bing Wang,et al.  Robust nonlinear controller design of wind turbine with doubly fed induction generator by using Hamiltonian energy approach , 2011, Proceedings of the 30th Chinese Control Conference.

[30]  Biswajit Basu,et al.  Passive control of wind turbine vibrations including blade/tower interaction and rotationally sampled turbulence , 2008 .

[31]  Fu-Cheng Wang,et al.  Vibration control of an optical table employing mechatronic inerter networks , 2016 .

[32]  Huijun Gao,et al.  Load Mitigation for a Floating Wind Turbine via Generalized H∞ Structural Control , 2016, IEEE Trans. Ind. Electron..

[33]  T. Kapitaniak,et al.  The application of inerter in tuned mass absorber , 2015 .