A robust and extendable sheath flow interface with minimal dead volume for coupling CE with ESI-MS.

In this paper, we describe a robust sheath flow-based CE-MS interface with minimal interface dead volume based on an extended pattern. A 20µm i.d. × 90µm o.d. fused-silica capillary with a chemically-etched thin-wall tip (30µm o.d.) was used as the separation capillary as well as electrospray emitter, and a 200µm i.d. × 375µm o.d. capillary with a tapered tip (40µm o.d.) was used as the sheath flow capillary. An extendable sheath-flow interface mode was adopted by decreasing the thickness of separation capillary tip and extending the separation capillary tip out from the sheath flow capillary tip, and allowing the sheath flow to be transferred to the separation capillary tip along its outer surface, forming a surface sheath flow to mix with sample flow at the separation capillary tip. Such a strategy could significantly reduce the interface dead volume and thus improve the CE separation efficiency and detection sensitivity, as well as evidently enhance the working reliability of the CE-MS interface. We investigated various factors affecting the interface performance, including capillary extending distance, emitter diameters, sheath flow capillary shape, and sheath flow rate. Under the optimized conditions, a minimal interface dead volume of ca. 4pL was obtained which is the smallest one compared with previously-reported sheath flow-based CE-MS interfaces. The feasibility and applicability of the present CE-MS interface were demonstrated in the separation of a peptide mixture with high separation efficiency of 2.07-3.38µm plate heights and good repeatabilities (< 6.1% RSD, n = 5). We except such a simple and robust interface could provide a possible solution for the development of commercial CE-MS interfaces differing from the currently-used ones, and has the potentials to be applied in routine analytical laboratories for various studies such as proteomics, metabolomics, or single cell analysis.

[1]  High‐speed separation of proteins by sodium dodecyl sulfate‐capillary gel electrophoresis with partial translational spontaneous sample injection , 2011, Electrophoresis.

[2]  José Barbosa,et al.  Comparison of sheathless and sheath‐flow electrospray interfaces for the capillary electrophoresis‐electrospray ionization‐mass spectrometry analysis of peptides , 2005, Electrophoresis.

[3]  M. Tomita,et al.  Capillary electrophoresis mass spectrometry-based saliva metabolomics identified oral, breast and pancreatic cancer-specific profiles , 2009, Metabolomics.

[4]  M. Moini.  Design and performance of a universal sheathless capillary electrophoresis to mass spectrometry interface using a split-flow technique. , 2001, Analytical chemistry.

[5]  N. Dovichi,et al.  Simplified capillary electrophoresis nanospray sheath-flow interface for high efficiency and sensitive peptide analysis. , 2010, Rapid communications in mass spectrometry : RCM.

[6]  Liangliang Sun,et al.  Ultrasensitive and fast bottom-up analysis of femtogram amounts of complex proteome digests. , 2013, Angewandte Chemie.

[7]  T. Veenstra,et al.  A sheathless nanoflow electrospray interface for on-line capillary electrophoresis mass spectrometry. , 2003, Analytical chemistry.

[8]  E. Maxwell,et al.  Decoupling CE and ESI for a more robust interface with MS , 2010, Electrophoresis.

[9]  Lingjun Li,et al.  Capillary electrophoresis coupled to MALDI mass spectrometry imaging with large volume sample stacking injection for improved coverage of C. borealis neuropeptidome. , 2019, The Analyst.

[10]  Masaru Tomita,et al.  Simultaneous determination of anionic intermediates for Bacillus subtilis metabolic pathways by capillary electrophoresis electrospray ionization mass spectrometry. , 2002, Analytical chemistry.

[11]  Liangliang Sun,et al.  Third-generation electrokinetically pumped sheath-flow nanospray interface with improved stability and sensitivity for automated capillary zone electrophoresis-mass spectrometry analysis of complex proteome digests. , 2015, Journal of proteome research.

[12]  Shiuh-Jen Jiang,et al.  Determination of monophosphate nucleotides by capillary electrophoresis inductively coupled plasma mass spectrometry. , 2002, The Analyst.

[13]  Nhu Q Vu,et al.  Recent Advances and New Perspectives in Capillary Electrophoresis-Mass Spectrometry for Single Cell “Omics” , 2018, Molecules.

[14]  M. Tomita,et al.  Quantitative metabolome analysis using capillary electrophoresis mass spectrometry. , 2003, Journal of proteome research.

[15]  E. Maxwell,et al.  Twenty years of interface development for capillary electrophoresis-electrospray ionization-mass spectrometry. , 2008, Analytica chimica acta.

[16]  Q. Fang,et al.  An automated capillary electrophoresis system for high‐speed separation of DNA fragments based on a short capillary , 2010, Electrophoresis.

[17]  Naoki Asakawa,et al.  Highly robust stainless steel tips as microelectrospray emitters. , 2002, Rapid communications in mass spectrometry : RCM.

[18]  Q. Fang,et al.  Swan probe: A nanoliter-scale and high-throughput sampling interface for coupling electrospray ionization mass spectrometry with microfluidic droplet array and multiwell plate. , 2014, Analytical chemistry.

[19]  S. Rudaz,et al.  Evaluation of a new low sheath–flow interface for CE‐MS , 2016, Electrophoresis.

[20]  J. Peter-Katalinic,et al.  Capillary electrophoresis‐mass spectrometry for glycoscreening in biomedical research , 2004, Electrophoresis.

[21]  J. Sweedler,et al.  Capillary electrophoresis with electrospray ionization mass spectrometric detection for single-cell metabolomics. , 2009, Analytical chemistry.

[22]  M. Moini.  Simplifying CE-MS operation. 2. Interfacing low-flow separation techniques to mass spectrometry using a porous tip. , 2007, Analytical chemistry.

[23]  T. Janáky,et al.  Design and performance of a sheathless capillary electrophoresis/mass spectrometry interface by combining fused-silica capillaries with gold-coated nanoelectrospray tips. , 2005, Rapid communications in mass spectrometry : RCM.