Kinetic model for dependence of thin film stress on growth rate, temperature, and microstructure

During deposition, many thin films go through a range of stress states, changing from compressive to tensile and back again. In addition, the stress depends strongly on the processing and material parameters. We have developed a simple analytical model to describe the stress evolution in terms of a kinetic competition between different mechanisms of stress generation and relaxation at the triple junction where the surface and grain boundary intersect. The model describes how the steady state stress scales with the dimensionless parameter D/LR where D is the diffusivity, R is the growth rate, and L is the grain size. It also explains the transition from tensile to compressive stress as the microstructure evolves from isolated islands to a continuous film. We compare calculations from the model with measurements of the stress dependence on grain size and growth rate in the steady state regime and of the evolution of stress with thickness for different temperatures.

[1]  Huajian Gao,et al.  Analytical model of transient compressive stress evolution during growth of high diffusivity thin films on substrates , 2010 .

[2]  A. Nikroo,et al.  Understanding the relation between stress and surface morphology in sputtered films: Atomistic simulations and experiments , 2009 .

[3]  B. Sheldon,et al.  Microstructural Origins of Saccharin-Induced Stress Reduction in Electrodeposited Ni , 2009 .

[4]  E. Chason,et al.  Compressive stress generation in sn thin films and the role of grain boundary diffusion. , 2009, Physical review letters.

[5]  C. Thompson,et al.  Direct evidence for effects of grain structure on reversible compressive deposition stresses in polycrystalline gold films. , 2009, Physical review letters.

[6]  C. Pao,et al.  Thin film compressive stresses due to adatom insertion into grain boundaries. , 2007, Physical review letters.

[7]  B. Sheldon,et al.  Kinetic model of stress evolution during coalescence and growth of polycrystalline thin films. , 2007, Physical review letters.

[8]  A. Vecchio,et al.  The effect of deposition rate on the intrinsic stress in copper and silver thin films , 2007 .

[9]  A. Das,et al.  Compressive stress in polycrystalline volmer-weber films. , 2005, Physical review letters.

[10]  S. J. Hearne,et al.  Mechanisms inducing compressive stress during electrodeposition of Ni , 2005 .

[11]  C. Thompson,et al.  Correlation of stress and atomic-scale surface roughness evolution during intermittent homoepitaxial growth of (111)-oriented Ag and Cu. , 2004, Physical review letters.

[12]  C. Thompson,et al.  Reversible stress changes at all stages of Volmer–Weber film growth , 2004 .

[13]  L. Freund,et al.  Mechanics of compressive stress evolution during thin film growth , 2003 .

[14]  Huajian Gao,et al.  Atomistic and continuum studies of crack-like diffusion wedges and associated dislocation mechanisms in thin films on substrates , 2003 .

[15]  B. Sheldon,et al.  Intrinsic tensile stress and grain boundary formation during Volmer–Weber film growth , 2002 .

[16]  L. Freund,et al.  Origin of compressive residual stress in polycrystalline thin films. , 2002, Physical review letters.

[17]  David J. Srolovitz,et al.  Physical Origins of Intrinsic Stresses in Volmer-Weber Thin Films , 2002 .

[18]  B. Sheldon,et al.  Intrinsic stress, island coalescence, and surface roughness during the growth of polycrystalline films , 2001 .

[19]  L. Freund,et al.  Model for stress generated upon contact of neighboring islands on the surface of a substrate , 2001 .

[20]  P. Kotula,et al.  The dynamic competition between stress generation and relaxation mechanisms during coalescence of Volmer–Weber thin films , 2001 .

[21]  David J. Srolovitz,et al.  Surface stress model for intrinsic stresses in thin films , 2000 .

[22]  Frans Spaepen,et al.  Interfaces and stresses in thin films , 2000 .

[23]  Bruce M. Clemens,et al.  Crystallite coalescence: A mechanism for intrinsic tensile stresses in thin films , 1999 .

[24]  F. Spaepen,et al.  Measurements of stress during vapor deposition of copper and silver thin films and multilayers , 1996 .

[25]  Reinhold Koch,et al.  The intrinsic stress of polycrystalline and epitaxial thin metal films , 1994 .

[26]  William D. Nix,et al.  Stresses and deformation processes in thin films on substrates , 1988 .

[27]  R. Koch,et al.  The internal stress in thin silver, copper and gold films , 1985 .

[28]  R. W. Hoffman,et al.  Stresses in thin films: The relevance of grain boundaries and impurities , 1976 .