Reproducible reference frame for in vitro testing of the human vertebrae.

Definition of an anatomical reference frame is necessary for in vitro biomechanical testing. Nevertheless, there is neither a clear recommendation, nor consensus in the literature concerning an anatomical reference frame for in vitro testing of the human vertebrae. The scope of this work is to define a reference frame for the human vertebrae for in vitro applications. The proposed anatomical reference frame relies on alignment of well-defined points on the endplates, and on two landmarks on the posterior wall. The repeatability of the proposed alignment procedure has been tested in vitro by 5 operators, on 7 specimens. Furthermore, the feasibility and repeatability of the proposed procedure was assessed in silico, using CT-scans of the same specimens. Variations between operators were slightly larger than between repetitions by the same operator. The intra-operator in vitro repeatability was better than 3° for all angles. The inter-operator in vitro repeatability was better than 9° for all angles. The lateral tilt was the most repeatable angle, while anterior-posterior tilt was least repeatable. The repeatability when alignment was performed in silico on CT-scans was comparable to that obtained in vitro, on the physical specimens. This is the first time than an anatomical reference frame is formally defined and validated for the human vertebrae. The adoption of this reference frame will provide more reproducible alignment of the specimens and of the test load. This will enable better in vitro biomechanical tests, and comparisons with numerical models.

[1]  W. Hayes,et al.  Cross-sectional geometry of Pecos Pueblo femora and tibiae--a biomechanical investigation: I. Method and general patterns of variation. , 1983, American journal of physical anthropology.

[2]  J. J. O’Connor.  Load simulation problems in model testing , 1992 .

[3]  Fabio Baruffaldi,et al.  Mechanical testing of cancellous bone from the femoral head: experimental errors due to off-axis measurements. , 2007, Journal of biomechanics.

[4]  A Leardini,et al.  Position and orientation in space of bones during movement: anatomical frame definition and determination. , 1995, Clinical biomechanics.

[5]  Serge Van Sint Jan,et al.  Identifying the location of human skeletal landmarks: Why standardized definitions are necessary - A proposal , 2005 .

[6]  Serge Van Sint Jan,et al.  Identifying the location of human skeletal landmarks: why standardized definitions are necessary--a proposal. , 2005, Clinical Biomechanics.

[7]  Hartmut Witte,et al.  ISB recommendation on definitions of joint coordinate system of various joints for the reporting of human joint motion--part I: ankle, hip, and spine. International Society of Biomechanics. , 2002, Journal of biomechanics.

[8]  Alberto Leardini,et al.  Multimod Data Manager: A tool for data fusion , 2007, Comput. Methods Programs Biomed..

[9]  F. Kainberger,et al.  A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro. , 2010, Journal of biomechanics.

[10]  M. Adams,et al.  Vertebral fractures in the elderly may not always be "osteoporotic". , 2010, Bone.

[11]  M M Panjabi,et al.  Thoracic Human Vertebrae Quantitative Three‐Dimensional Anatomy , 1991, Spine.

[12]  P. Augat,et al.  The impact of a distal expansion mechanism added to a standard pedicle screw on pullout resistance. A biomechanical study. , 2013, The spine journal : official journal of the North American Spine Society.

[13]  M M Panjabi,et al.  Human Lumbar Vertebrae: Quantitative Three-Dimensional Anatomy , 1992, Spine.

[14]  Marco Viceconti,et al.  Virtual palpation of skeletal landmarks with multimodal display interfaces , 2007, Medical informatics and the Internet in medicine.

[15]  Thomas R Oxland,et al.  Thoracolumbar spine mechanics contrasted under compression and shear loading , 2002, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[16]  Y. Fung,et al.  Biomechanics: Mechanical Properties of Living Tissues , 1981 .

[17]  Ruth K Wilcox,et al.  A Biomechanical Investigation of Vertebroplasty in Osteoporotic Compression Fractures and in Prophylactic Vertebral Reinforcement , 2007, Spine.

[18]  M. Adams,et al.  Bone creep can cause progressive vertebral deformity. , 2009, Bone.

[19]  T M Keaveny,et al.  Biomechanical consequences of an isolated overload on the human vertebral body , 2000, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[20]  W C Hayes,et al.  Cross-sectional geometry of Pecos Pueblo femora and tibiae--a biomechanical investigation: II. Sex, age, side differences. , 1983, American journal of physical anthropology.

[21]  M M Panjabi,et al.  Cervical Human Vertebrae Quantitative Three‐Dimensional Anatomy of the Middle and Lower Regions , 1991, Spine.

[22]  Ruth K Wilcox,et al.  Preliminary biomechanical evaluation of prophylactic vertebral reinforcement adjacent to vertebroplasty under cyclic loading. , 2009, The spine journal : official journal of the North American Spine Society.

[23]  M. Hongo,et al.  Surface strain distribution on thoracic and lumbar vertebrae under axial compression. The role in burst fractures. , 1999, Spine.

[24]  John D. Currey.  Bone as a Mechanical Structure , 1982 .

[25]  J. Buckley,et al.  An improved metric for quantifying the stiffnesses of intact human vertebrae , 2009, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[26]  Luca Cristofolini,et al.  Anatomical Reference Frames for Long Bones: Biomechanical Applications , 2012 .

[27]  Alberto Leardini,et al.  Comparison of three standard anatomical reference frames for the tibia-fibula complex. , 2008, Journal of biomechanics.

[28]  L Cristofolini,et al.  A critical analysis of stress shielding evaluation of hip prostheses. , 1997, Critical reviews in biomedical engineering.

[29]  M M Panjabi,et al.  A technique for measurement and description of three-dimensional six degree-of-freedom motion of a body joint with an application to the human spine. , 1981, Journal of biomechanics.

[30]  P R Cavanagh,et al.  ISB recommendations for standardization in the reporting of kinematic data. , 1995, Journal of biomechanics.

[31]  Y. Fung,et al.  Bone and Cartilage , 1993 .

[32]  Bryan Buchholz,et al.  ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion--Part II: shoulder, elbow, wrist and hand. , 2005, Journal of biomechanics.