Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load

This work presents a numerical model to simulate the failure behavior of slender reinforced concrete columns subjected to eccentric compression loads. Due to the significant influence of the lateral displacements on the loading state provided by an eccentric load, geometric nonlinearity is considered. The responses of the concrete in tension and compression are described by two scalar damage variables that reduce, respectively, the positive and negative effective stress tensors, which lead to two different damage surfaces that control the dimension of the elastic domain. To describe the behavior of the reinforcements, truss finite elements with elastoplastic material model are employed. Interaction between the steel bars and concrete is modeled through the use of interface finite elements with high aspect ratio and a damage model designed to describe the bond-slip behavior. The results showed that the numerical model is able to represent the nonlinear behavior of slender concrete columns with good accuracy, taking into account: formation of cracks steel yielding crushing of the concrete in the compressive region and interaction between rebars and concrete.

[1]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[2]  Luis Pallarés,et al.  Experimental research on high strength concrete slender columns subjected to compression and biaxial bending forces , 2008 .

[3]  Kenneth J. Elwood,et al.  Modelling failures in existing reinforced concrete columns , 2004 .

[4]  Jin-Keun Kim,et al.  Buckling behaviour of slender high-strength concrete columns , 1995 .

[5]  Osvaldo L. Manzoli,et al.  Modeling of interfaces in two-dimensional problems using solid finite elements with high aspect ratio , 2012 .

[6]  J. Oliver On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations , 2000 .

[7]  Kent Gylltoft,et al.  SLENDER HIGH-STRENGTH CONCRETE COLUMNS SUBJECTED TO ECCENTRIC LOADING , 1998 .

[8]  J. Oliver,et al.  Strong discontinuities and continuum plasticity models: the strong discontinuity approach , 1999 .

[9]  Dan M. Frangopol,et al.  Safety evaluation of slender high-strength concrete columns under sustained loads , 2003 .

[10]  Jacek Tejchman,et al.  FE analysis of failure behaviour of reinforced concrete columns under eccentric compression , 2008 .

[11]  M. Bouchaboub,et al.  Nonlinear analysis of slender high-strength R/C columns under combined biaxial bending and axial compression , 2013 .

[12]  J. C. Simo,et al.  An analysis of strong discontinuities induced by strain-softening in rate-independent inelastic solids , 1993 .

[13]  Luiz Carlos Da Costa Lino Leite,et al.  Experimental research on high strength concrete slender columns subjected to compression and uniaxial bending with unequal eccentricities at the ends , 2013 .

[14]  Miguel Cervera,et al.  A RATE-DEPENDENT ISOTROPIC DAMAGE MODEL FOR THE SEISMIC ANALYSIS OF CONCRETE DAMS , 1996 .

[15]  村上 澄男,et al.  Continuum damage mechanics : a continuum mechanics approach to the analysis of damage and fracture , 2012 .

[16]  J. R. Carmona,et al.  A fracture mechanics model to describe the buckling behavior of lightly reinforced concrete columns , 2013 .