Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes

Abstract Non-pneumatic tires (NPTs) have wide application prospects due to their advantages of no run-flat, no need of air pressure maintenance, and low rolling resistance. In this paper, the static and dynamic behaviors of NPTs with different honeycomb spokes were investigated. Based on the static behavior of three types of NPTs with the same cell wall thickness of honeycomb or the same reference load carrying capacity, it is shown that the maximum stresses in spokes and tread of a NPT are much lower than that of traditional pneumatic tires, but its load carrying capacity is higher than the latter. In comparison with the dynamic behavior of three types of NPTs designed with the same load carrying capacity, it is found that the stress level in spokes and tread under dynamic loading are higher than that under static loading. The rolling resistance of NPTs with the smallest cell expanding angle is lowest, which is due to the lowest mass and smallest deformation of honeycomb spokes. Taking all these factors into account, it is suggested that an optimal NPT in applications is one with a small cell expanding angle and wall thickness.

[1]  F. S. Conant,et al.  ENERGY LOSSES IN TIRES , 1974 .

[2]  J. Summers,et al.  Compliant hexagonal periodic lattice structures having both high shear strength and high shear strain , 2011 .

[3]  Jandro L. Abot,et al.  The effect of honeycomb relative density on its effective in-plane elastic moduli : An experimental study , 2008 .

[4]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[6]  Wan-Suk Yoo,et al.  Mesh generation considering detailed tread blocks for reliable 3D tire analysis , 2004 .

[7]  B. Abbès,et al.  Analytical homogenization for in-plane shear, torsion and transverse shear of honeycomb core with skin and thickness effects , 2016 .

[8]  T. B. Rhyne,et al.  Development of a Non-Pneumatic Wheel3 , 2006 .

[9]  Bin Wang,et al.  In-plane stiffness of the anisotropic multifunctional hierarchical honeycombs , 2015 .

[10]  Feng Jin,et al.  Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation , 2015 .

[11]  Kwangwon Kim,et al.  Flexible cellular solid spokes of a non-pneumatic tire , 2012 .

[12]  Timothy B. Rhyne,et al.  Development of a two-dimensional model of a compliant non-pneumatic tire , 2012 .

[13]  Yongle Sun,et al.  Effect of entrapped gas on the dynamic compressive behaviour of cellular solids , 2015 .

[14]  Tongxi Yu,et al.  Energy Absorption of Structures and Materials , 2003 .

[15]  Zhihua Wang,et al.  Experimental study on the effects of specimen in-plane size on the mechanical behavior of aluminum hexagonal honeycombs , 2015 .

[16]  Kwangwon Kim,et al.  Static Contact Behaviors of a Non-Pneumatic Tire with Hexagonal Lattice Spokes , 2013 .

[17]  J. Summers,et al.  Design of Cellular Shear Bands of a Non-Pneumatic Tire -Investigation of Contact Pressure , 2010 .

[18]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[19]  Jaehyung Ju,et al.  Compliant cellular structures: Application to a passive morphing airfoil , 2013 .

[20]  Joshua D. Summers,et al.  Optimisation of geometry and material properties of a non-pneumatic tyre for reducing rolling resistance , 2014 .

[21]  Lingling Hu,et al.  A novel auxetic honeycomb with enhanced in-plane stiffness and buckling strength , 2017 .

[22]  Byung Man Kwak,et al.  Pattern design of a non-pneumatic tyre for stiffness using topology optimization , 2012 .

[23]  L. Thompson,et al.  Rolling Resistance of a Nonpneumatic Tire Having a Porous Elastomer Composite Shear Band , 2013 .

[24]  K. Zhou,et al.  Bounds for the dynamic modulus of unidirectional composites with bioinspired staggered distributions of platelets , 2017 .