Study on Constant —tension Control of Rolling Machine Based on Induction Motor Drive

The new approach of the constant-tension control of rolling machine is presented in this paper. On the premise of the close-loop control of the induction motor torque, the torque of the induction motor can adjust along with the change of the rolling machine diameter automatically, so the constant-tension control is realized. The rotor speed signal adopted in the system is derived from the indirect measurement based on induction motor theory. The approach employs recursive least squares (RLS) to estimate rotor speed in real time. The accuracy of estimated rotor speed is independent of rotor resistance's value. The results show that the system has good static performance. The effectiveness of the proposed strategy is approved

[1]  Seung-Ki Sul,et al.  Speed sensorless vector control of induction motor using extended Kalman filter , 1994 .

[2]  Li Yongdong,et al.  Direct torque control of induction motor for low speed drives considering discrete effects of control and dead-time of inverter , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[3]  A. Purcell,et al.  Device switching scheme for direct torque control , 1998 .

[4]  Paweł Grabowski.  Direct torque neuro-fuzzy control of induction motor drive , 1997, Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066).

[5]  Toshihiko Noguchi,et al.  High frequency switching operation of PWM inverter for direct torque control of induction motor , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[6]  Toshihiko Noguchi,et al.  Take a look back upon the past decade of direct torque control [of induction motors] , 1997, Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066).

[7]  Tadashi Fukao,et al.  Robust speed identification for speed sensorless vector control of induction motors , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[8]  A. Tani,et al.  Effects of flux and torque hysteresis band amplitude in direct torque control of induction machines , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[9]  M. A. Ouhrouche.  Estimation of speed, rotor flux, and rotor resistance in cage induction motor using the EKF algorithm , 2002 .

[10]  L.M. Tolbert,et al.  Direct torque control of induction machines using space vector modulation , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.