Tactile sensors based on conductive polymers

This paper presents results from a selection of tactile sensors that have been designed and fabricated. These sensors are based on a common approach that consists in placing a sheet of piezoresistive material on the top of a set of electrodes. We use a thin film of conductive polymer as the piezoresistive material. Specifically, a conductive water-based ink of this polymer is deposited by spin-coating on a flexible plastic sheet, giving it a smooth, homogeneous and conducting thin film. The main interest in this procedure is that it is cheap and it allows the fabrication of flexible and low cost tactile sensors. In this work, we present results from sensors made using two technologies. Firstly, we have used a flexible printed circuit board (PCB) technology to fabricate the set of electrodes and addressing tracks. The result is a simple, flexible tactile sensor. In addition to these sensors on PCB, we have proposed, designed and fabricated sensors with screen-printing technology. In this case, the set of electrodes and addressing tracks are made by printing an ink based on silver nanoparticles. The exhaustive characterization provides us insights into the design of these tactile sensors.

[1]  Jan Wikander,et al.  Tactile sensing in intelligent robotic manipulation - a review , 2005, Ind. Robot.

[2]  R. A. Russell,et al.  A tactile sensor array that also grasps objects , 2006 .

[3]  Anurat Wisitsoraat,et al.  Low cost thin film based piezoresistive MEMS tactile sensor , 2007 .

[4]  Ronald S. Fearing,et al.  A surface micromachined microtactile sensor array , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[5]  Maurizio Valle,et al.  POSFET Based Tactile Sensor Arrays , 2007, 2007 14th IEEE International Conference on Electronics, Circuits and Systems.

[6]  Heinz Wörn,et al.  Development of a flexible tactile sensor system for a humanoid robot , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[7]  Tao Mei,et al.  The design and fabrication of a flexible three-dimensional force sensor skin , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Adisorn Tuantranont,et al.  Micromachined piezoresistive tactile sensor array fabricated by bulk-etched MUMPs process , 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03..

[9]  Takao Someya,et al.  A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applications. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[10]  Tommaso D'Alessio,et al.  Measurement errors in the scanning of piezoresistive sensors arrays , 1999 .

[11]  G. Zimmer,et al.  New tactile sensor chip with silicone rubber cover , 2000 .

[12]  Sung-Hoon Kim,et al.  Flexible Multimodal Tactile Sensing System for Object Identification , 2006, 2006 5th IEEE Conference on Sensors.

[13]  Jong-Ho Kim,et al.  A silicon-based flexible tactile sensor for ubiquitous robot companion applications , 2006 .

[14]  Oliver Brand,et al.  CMOS-based sealed membranes for medical tactile sensor arrays , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[15]  Fernando Vidal-Verdú,et al.  Tactile sensors based on conductive polymers , 2009, Microtechnologies.

[16]  B. J. Kane,et al.  A traction stress sensor array for use in high-resolution robotic tactile imaging , 2000, Journal of Microelectromechanical Systems.

[17]  Gregorio Obieta,et al.  All-plastic distributed pressure sensors: taylor-made performance by electroactive materials design , 2008 .

[18]  M. Shimojo,et al.  A tactile sensor sheet using pressure conductive rubber with electrical-wires stitched method , 2004, IEEE Sensors Journal.

[19]  Euisik Yoon,et al.  A Capacitive Proximity Sensor in Dual Implementation with Tactile Imaging Capability on a Single Flexible Platform For Robot Assistant Applications , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[20]  Wen J. Li,et al.  An integrated MEMS three-dimensional tactile sensor with large force range , 2000 .

[21]  Michael Leineweber,et al.  A novel tactile sensor system for heavy-load applications based on an integrated capacitive pressure sensor , 1998 .

[22]  Mark H. Lee,et al.  Tactile Sensing: New Directions, New Challenges , 2000, Int. J. Robotics Res..

[23]  Giorgio Cannata,et al.  Processing of Tactile/Force Measurements for a Fully Embedded Sensor , 2006, 2006 IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems.