Assessment of mechanical strength of nano silica concrete (NSC) subjected to elevated temperatures

Purpose This paper aims to inspect the effect of indirect elevated temperature on the mechanical performance of nano silica concrete (NSC). The effect on both compressive and bond strengths is studied. Pre- and post-exposure to elevated temperature ranges of 200 to 600°C is examined. A range covered by three percentages of 1.5, 3 and 4.5 per cent nano silica (NS) in concrete mixes is tested. Design/methodology/approach Pre-exposure mechanical tests (normal conditions – room temperature), using 3 per cent NS in the concrete mix, led to the highest increase in both compressive and bond strengths (43 per cent and 38.5 per cent, respectively), compared to the control mix without NS (based on 28-day results). It is worth noticing that adding NS to the concrete mixes does not have a significant effect on improving early-age strength. Besides, permeability tests are performed on NSC with different NS ratios. NS improved the concrete permeability for all tested percentages of NS. The maximum reduction is accompanied by the maximum percentage used (4.5 per cent NS in the NSC mix), reducing permeability to half the value of the concrete mix without NS. As for post-exposure to elevated-temperature mechanical tests, NSC with 1.5 per cent NS exhibited the lowest loss in strength owing to indirect heat exposure of 600°C; the residual compressive and bond strengths are 73 per cent and 35 per cent, respectively. Findings The dispersion technique of NS has a key role in NSC-distinguished mechanical performance with NSC having lower NS percentages. NS significantly improved bond strength. NS has a remarkable effect on elevated temperature endurance. The bond strength of NSC exposed to elevated temperatures suffered faster deterioration than compressive strength of the exposed NSC. Research limitations/implications A special scale factor needs to be investigated for the NSC. Originality/value Although a lot of effort is placed in evaluating the benefits of using nano materials in structural concrete, this paper presents one of the first outcomes of the thermal effects on concrete mixes with NS as a partial cement replacement.

[1]  Jong-Bin Park,et al.  Characteristics of cement mortar with nano-SiO2 particles , 2007 .

[2]  M. Serag,et al.  Bond Strength of Nano Silica Concrete Subjected to Corrosive Environments , 2016 .

[3]  G. Peng,et al.  Change in microstructure of hardened cement paste subjected to elevated temperatures , 2008 .

[4]  M. Serag,et al.  The Effect of Indirect Sonication on the Reactivity of Nano Silica Concrete , 2014 .

[5]  Gabriel A. Khoury,et al.  Compressive strength of concrete at high temperatures: a reassessment , 1992 .

[6]  Ali Behnood,et al.  Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures , 2008 .

[7]  M. Serag,et al.  EFFECT OF NANO SILICA ON CONCRETE BOND STRENGTH MODES OF FAILURE , 2017 .

[8]  R. A. Day,et al.  Interaction of silica fume with calcium hydroxide solutions and hydrated cement pastes , 1998 .

[9]  R. Al-zaid,et al.  Effect of manufacturing process and rusting on the bond behavior of deformed bars in concrete , 2004 .

[10]  B. A. Nejand,et al.  Silica nanoparticle size effect on mechanical properties and microstructure of cement mortar , 2011 .

[11]  Effect of Rebar Cover and Development Length on Bond and Slip in High Strength Concrete , 2016 .

[12]  M. Serag,et al.  Effect of Nano Silica De-agglomeration, and Methods of Adding Super-plasticizer on the Compressive Strength, and Workability of Nano Silica Concrete , 2013 .

[13]  Tao Ji,et al.  Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2 , 2005 .

[14]  Andrew H. Buchanan,et al.  Structural Design for Fire Safety , 2001 .

[15]  J. I. Álvarez,et al.  Blended pastes of cement and lime: Pore structure and capillary porosity , 2006 .

[16]  T. Parhizkar,et al.  SELF-COMPACTING CONCRETE CONTAINING DIFFERENT POWDERS AT ELEVATED TEMPERATURES-MECHANICAL PROPERTIES AND CHANGES IN THE PHASE COMPOSITION OF THE PASTE , 2011 .

[17]  R. Hamid,et al.  The Effect of High Temperature on Mortars Containing Silica Fume , 2011 .

[18]  Abdul-Ghani Olabi,et al.  Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar , 2012 .

[19]  Surendra P. Shah,et al.  Nanotechnology of Concrete: Recent Developments and Future Perspectives American Concrete Institute, ACI Special Publication: Preface , 2008 .

[20]  A. Noumowé,et al.  Transient heating effect on high strength concrete , 1996 .

[21]  J. Ou,et al.  Microstructure of cement mortar with nano-particles , 2004 .

[22]  Toshiyasu Hasegawa,et al.  Structural behavior of reinforced concrete structures at high temperatures , 1995 .