Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes
暂无分享,去创建一个
[1] Z. Lavan,et al. Entropy generation in combined heat and mass transfer , 1987 .
[2] H. Yavuz,et al. Design parameters of a radiative heat engine , 1993 .
[3] G. Bisio. Critical Points of Various Functions in the One-Dimensional Heat Transfer Process , 1992 .
[4] Z. Lavan,et al. Entropy generation in convective heat transfer and isothermal convective mass transfer , 1987 .
[5] Adrian Bejan,et al. Power and Refrigeration Plants for Minimum Heat Exchanger Inventory , 1993 .
[6] A. D. Vos,et al. Endoreversible thermodynamics of solar energy conversion , 1992 .
[7] Thermodynamic optimization of regenerators , 1991 .
[8] A. D. Vos,et al. Efficiency of some heat engines at maximum-power conditions , 1985 .
[9] V. Arpaci. Radiative entropy production , 1985 .
[10] V. Bădescu. The theoretical maximum efficiency of solar converters with and without concentration , 1989 .
[11] J. R. Senft. Mechanical efficiency of kinematic heat engines , 1987 .
[12] A. Bejan,et al. Second Law Analysis and Synthesis of Solar Collector Systems , 1981 .
[13] Bo Carlsson,et al. An exergy analysis of sensible and latent heat storage , 1985 .
[14] Amos Zemel,et al. Irreversible thermodynamics of phase change heat transfer: Basic principles and applications to latent heat storage , 1992 .
[15] Adrian Bejan,et al. Two Fundamental Problems of Refrigerator Thermal Insulation Design , 1994 .
[16] A. Bejan. Advanced Engineering Thermodynamics , 1988 .
[17] Sanford Klein,et al. Effects of Irreversibility and Economics on the Performance of a Heat Engine , 1992 .
[18] K. Altfeld,et al. Second law optimization of flat-plate solar air heaters Part I: The concept of net exergy flow and the modeling of solar air heaters , 1988 .
[19] A. Bejan. Contact Melting Heat Transfer and Lubrication , 1994 .
[20] P. Chambadal,et al. Évolution et applications du concept d'entropie , 1963 .
[21] Chih Wu,et al. Power optimization of an endoreversible stirling cycle with regeneration , 1994 .
[22] Sushil K. Chaturvedi,et al. Second-law analysis of solar-assisted heat pumps , 1991 .
[23] R. Agsten. Thermodynamic optimization of current leads into low temperature regions , 1973 .
[24] R. Prasad,et al. Performance evaluation of convective heat transfer enhancement devices using exergy analysis , 1993 .
[25] Jincan Chen,et al. A class of irreversible Carnot refrigeration cycles with a general heat transfer law , 1990 .
[26] M. Sokolov,et al. Optimal coupling and feasibility of a solar-powered year-round ejector air conditioner , 1993 .
[27] A. D. Vos,et al. Entropy fluxes, endoreversibility, and solar energy conversion , 1993 .
[28] George A. Adebiyi,et al. A Second-Law Study on Packed Bed Energy Storage Systems Utilizing Phase-Change Materials , 1991 .
[29] Mohamed Mohamed El-Wakil,et al. Nuclear power engineering , 1962 .
[30] Constantinos A. Balaras,et al. A review of augmentation techniques for heat transfer surfaces in single-phase heat exchangers , 1990 .
[31] Syed M. Zubair,et al. Second-law-based thermodynamic analysis of regenerative-reheat Rankine-cycle power plants , 1992 .
[32] M. Conti,et al. Latent heat thermal storage for solar dynamic power generation , 1993 .
[33] C. Carrington,et al. Second law analysis of combined heat and mass transfer in internal and external flows , 1992 .
[34] G. Bisio. Thermodynamic analysis of the one-dimensional heat conduction with inhomogeneities in the heat flux direction , 1988 .
[35] Harvey S. Leff,et al. Thermal efficiency at maximum work output: New results for old heat engines , 1987 .
[36] Y. M. Eyssa,et al. Thermodynamic optimization of thermal radiation shields for a cryogenic apparatus , 1978 .
[37] Adrian Bejan. Extraction of exergy from solar collectors under time-varying conditions , 1982 .
[38] Criterion for burn-up conditions in gas-cooled cryogenic current leads , 1976 .
[39] Abdulghani A. Al-Farayedhi,et al. Second-law-based thermoeconomic optimization of a sensible heat thermal energy storage system , 1993 .
[40] S. S. Stecco,et al. Energy for the Transition Age , 1992 .
[41] Dusan P. Sekulic,et al. One approach to irreversibility minimization in compact crossflow heat exchanger design , 1986 .
[42] Ramesh K. Shah,et al. Costs of Irreversibilities in Heat Exchanger Design , 1983 .
[43] Adrian Bejan. How to distribute a finite amount of insulation on a wall with nonuniform temperature , 1993 .
[44] F. Curzon,et al. Efficiency of a Carnot engine at maximum power output , 1975 .
[45] S. M. Zubair,et al. Second-law-based thermoeconomic optimization of two-phase heat exchangers , 1987 .
[46] Stanislaw Sieniutycz,et al. Finite-time thermodynamics and thermoeconomics , 1990 .
[47] M. Conti,et al. Phase change thermal storage : transient behaviour analysis of a solar receiver/storage module using the enthalpy method , 1993 .
[48] J. R. Senft. General analysis of the mechanical efficiency of reciprocating heat engines , 1993 .
[49] S. Jeter. Maximum conversion efficiency for the utilization of direct solar radiation , 1981 .
[50] V. Badescu. Maximum conversion efficiency for the utilization of diffuse solar radiation , 1991 .
[51] D. Poulikakos,et al. Second law analysis of combined heat and mass transfer phenomena in external flow , 1989 .
[52] R. Prasad,et al. Performance evaluation using exergy analysis—application to wire-coil inserts in forced convection heat transfer , 1994 .
[53] C. Hsieh,et al. A General Analysis of Phase-Change Energy Storage for Solar Energy Applications , 1992 .
[54] M. J. Moran,et al. Thermal design and optimization , 1995 .
[55] Adrian Bejan,et al. Conservation of available work (exergy) by using promoters of swirl flow in forced convection heat transfer , 1980 .
[56] A. Bejan. Refrigerator-recirculator systems for large forced-cooled superconducting magnets , 1977 .
[57] J. M. Khodadadi,et al. Optimization of Cooled Shields in Insulations , 1984 .
[58] J. Chato,et al. Second-law-based optimization of heat exchanger networks using load curves , 1986 .
[59] A. Bejan. Two Thermodynamic Optima in the Design of Sensible Heat Units for Energy Storage , 1978 .
[60] K. Altfeld,et al. Second law optimization of flat-plate solar air heaters. Part 2: Results of optimization and analysis of sensibility to variations of operating conditions , 1988 .
[61] Sang Soo Kim,et al. The maximum power from a finite reservoir for a Lorentz cycle , 1992 .
[62] B. Andresen,et al. Thermodynamics in finite time: extremals for imperfect heat engines , 1977 .
[63] Adrian Bejan,et al. When to defrost a refrigerator, and when to remove the scale from the heat exchanger of a power plant , 1994 .
[64] John W. Mitchell,et al. Optimum Heat Power Cycles for Specified Boundary Conditions , 1991 .
[65] Carnot‐like processes in finite time. II. Applications to model cycles , 1993 .
[66] P. Chambadal. Les centrales nucléaires , 1957 .
[67] A. Stodola. Steam and gas turbines , 1927 .
[68] D. C. Spanner,et al. Introduction to Thermodynamics , 1964 .
[69] Peter Salamon,et al. Finite time optimizations of a Newton’s law Carnot cycle , 1981 .
[70] R. Stephen Berry,et al. Power and efficiency limits for internal combustion engines via methods of finite‐time thermodynamics , 1993 .
[71] Bjarne Andresen,et al. Optimal paths for minimizing entropy generation in a common class of finite-time heating and cooling processes , 1992 .
[72] Y. Zarmi,et al. Wind energy as a solar‐driven heat engine: A thermodynamic approach , 1989 .
[73] A. Bejan,et al. Fundamentals of ice making by convection cooling followed by contact melting , 1995 .
[74] M. K. Drost,et al. Numerical predictions of local entropy generation in an impinging jet , 1989 .
[75] D. C. Agrawal,et al. Finite‐time Carnot refrigerators with wall gain and product loads , 1993 .
[76] A. Bejan. Unification of Three Different Theories Concerning the Ideal Conversion of Enclosed Radiation , 1987 .
[77] J. L. Smith,et al. Optimum temperature staging of cryogenic refrigeration system , 1994 .
[78] J. Parrott,et al. A thermodynamic cycle for photovoltaic energy conversion , 1990 .
[79] Bjarne Andresen,et al. Thermodynamics in finite time , 1984 .
[80] A. Bejan. Theory of heat transfer-irreversible power plants , 1988 .
[81] H. G. Ladas,et al. Finite-time view of the stirling engine , 1994 .
[82] DUSáAN P. SEKULICá. Entropy Generation in a Heat Exchanger , 1986 .
[83] J. Gordon,et al. General performance characteristics of real heat engines , 1992 .
[84] A. Vos,et al. The maximum efficiency of the conversion of solar energy into wind energy , 1991 .
[85] I. Puri. Second law analysis of convective droplet burning , 1992 .
[86] Victor Fairén,et al. On the efficiency of thermal engines with power output: Consideration of inertial effects , 1981 .
[87] A. Bejan. A Study of Entropy Generation in Fundamental Convective Heat Transfer , 1979 .
[88] V. Zimparov,et al. Performance evaluation criteria for enhanced heat transfer surfaces , 1994 .
[89] A. Selamet,et al. Entropic efficiency of energy systems , 1992 .
[90] R. Zamorano-Ulloa,et al. Finite-time thermodynamics approach to the superconducting transition , 1993 .
[91] R. Stephen Berry,et al. Finite‐time thermodynamics: Exergy and optimization of time‐constrained processes , 1994 .
[92] Vedat S. Arpaci,et al. Radiative entropy production—lost heat into entropy , 1987 .
[93] V. Kinra,et al. Thermoelastic Damping of a Laminated Beam in Flexure and Extension , 1993 .
[94] Exergy maximization in cryogenic regenerators , 1994 .
[95] B. Andresen,et al. Thermodynamics in finite time. I. The step-Carnot cycle , 1977 .
[96] A. Bejan,et al. Method for estimating the refrigeration costs of supercritical helium cooled cable superconductors , 1977 .
[97] M. J. Moran,et al. Exergy Analysis: Principles and Practice , 1994 .
[98] A. Bejan. Convection Heat Transfer , 1984 .
[99] Sunil Sarangi,et al. On the generation of entropy in a counterflow heat exchanger , 1982 .
[100] Adrian Bejan,et al. A GENERAL VARIATIONAL PRINCIPLE FOR THERMAL INSULATION SYSTEM DESIGN , 1979 .
[101] Giuseppe Grazzini,et al. Entropy parameters for heat exchanger design , 1988 .
[102] Ch. Charach,et al. On entropy generation in phase‐change heat conduction , 1989 .
[103] R. B. Bannerot,et al. Optimum solar collector operation for maximizing cycle work output. [Optimum outlet temperature] , 1977 .
[104] William M. Worek,et al. Second-law optimization of regenerative heat exchangers, including the effect of matrix heat conduction , 1993 .
[105] Jincan Chen. NEW PERFORMANCE BOUNDS OF A CLASS OF IRREVERSIBLE REFRIGERATORS , 1994 .
[106] Y. Tsujikawa,et al. Thermodynamic optimization method of regenerator of gas turbine with entropy generation , 1986 .
[107] Adrian Bejan,et al. Two design aspects of defrosting refrigerators , 1995 .
[108] G. Bisio. Entropy production rate in the one-dimensional heat conduction for systems whose thermal conductivity or its derivative are piecewise continuous with respect to temperature , 1990 .
[109] Adrian Bejan,et al. Theory of heat transfer-irreversible power plants. II: The optimal allocation of heat exchange equipment , 1995 .
[110] Giuseppe Grazzini,et al. Work from irreversible heat engines , 1991 .
[111] Giuseppe Grazzini,et al. Irreversible refrigerators with isothermal heat exchanges , 1993 .
[112] P. V. D. Wel,et al. Endoreversible Models for the Conversion of Solar Energy into Wind Energy , 1992 .
[113] Hongguang Jin,et al. Graphical exergy analysis of complex cycles , 1993 .
[114] Vikram K. Kinra,et al. On the thermoelastic damping of a one-dimensional inclusion in a uniaxial bar , 1993 .
[115] R. Petela. Exergy of Heat Radiation , 1964 .
[116] A. Bejan,et al. Entropy Generation Through Heat and Fluid Flow , 1983 .
[117] V. Bădescu. On the theoretical maximum efficiency of solar-radiation utilization , 1989 .
[118] Karl Heinz Hoffmann,et al. Optimal paths for thermodynamic systems: The ideal diesel cycle , 1982 .
[119] Changxu Wu,et al. A performance bound for real OTEC heat engines , 1987 .
[120] V. Bǎdescu. Optimum operation of a solar converter in combination with a Stirling or Ericsson heat engine , 1992 .
[121] Bjarne Andresen,et al. Optimal heating and cooling strategies for heat exchanger design , 1992 .
[122] B. H. Chen,et al. Performance-evaluation criteria for enhanced heat-transfer surfaces , 1988 .
[123] Peter Salamon,et al. Optimal heating of the working fluid in a cylinder equipped with a moving piston , 1981 .
[124] Fernando Angulo-Brown,et al. Endoreversible thermal cycle with a nonlinear heat transfer law , 1993 .
[125] Amos Zemel,et al. Thermodynamic analysis of latent heat storage in a shell-and-tube heat exchanger , 1992 .
[126] P. Landsberg,et al. Thermodynamic cycles with nearly universal maximum-work efficiencies , 1989 .
[127] Adrian Bejan,et al. THERMODYNAMICS OF PHASE-CHANGE ENERGY STORAGE : THE EFFECTS OF LIQUID SUPERHEATING DURING MELTING, AND IRREVERSIBILITY DURING SOLIDIFICATION , 1991 .
[128] Adrian Bejan,et al. Second-Law Analysis in Heat Transfer and Thermal Design , 1982 .
[129] Adrian Bejan. Refrigeration for rotating superconducting windings of large ac electric machines , 1976 .
[130] M. A. Rosen,et al. Appropriate thermodynamic performance measures for closed systems for thermal energy storage , 1992 .
[131] Itamar Procaccia,et al. On the efficiency of rate processes. Power and efficiency of heat engines , 1978 .
[132] R. A. Gaggioli,et al. Economic Sizing of Steam Piping and Insulation , 1979 .
[133] C. Carrington,et al. Application of Nonequilibrium Thermodynamics in Second Law Analysis , 1991 .
[134] Daniel Tondeur,et al. Equipartition of entropy production. An optimality criterion for transfer and separation processes , 1987 .
[135] M. Fujiwara. Exergy Analysis for the Performance of Solar Collectors , 1983 .
[136] Adrian Bejan,et al. Theory of heat transfer-irreversible refrigeration plants , 1989 .
[137] Vikram K. Kinra,et al. A Second-Law Analysis of Thermoelastic Damping , 1994 .
[138] Adrian Bejan,et al. Discrete cooling of low heat leak supports to 4.2 K , 1975 .
[139] Han Kwong Wing,et al. A second law concept of an equivalent solar collector , 1991 .
[140] A. Bejan. Second law analysis in heat transfer , 1980 .
[141] Adrian Bejan,et al. Optimum flowrate history for cooldown and energy storage processes , 1982 .
[142] Chin‐Hsiang Cheng,et al. Entropy generation and heat transfers via laminar forced-convection channel flows over transverse fins in entrance regions , 1989 .
[143] V. Shchukin,et al. THERMODYNAMICS AND HEAT TRANSFER , 1967 .
[144] M. El-Wakil,et al. Nuclear Energy Conversion , 1971 .
[145] Lu Pau-Chang. On optimum disposal of waste heat , 1980 .
[146] Sang Soo Kim,et al. Power optimization of an irreversible heat engine , 1991 .
[147] William M. Worek,et al. Second-law analysis of a two-dimensional regenerator , 1987 .
[148] C. G. Carrington,et al. Second law analysis of combined heat and mass transfer phenomena , 1991 .
[149] John D. Denton,et al. The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines , 1993 .
[150] Adrian Bejan,et al. Second-law analysis of solar collectors with energy storage capability , 1985 .
[151] G. Bisio. Thermodynamic optimization for cryogenic systems with a finite number of heat intercepts , 1989, Proceedings of the 24th Intersociety Energy Conversion Engineering Conference.
[152] Hasbi Yavuz,et al. Application of finite-time thermodynamics to MHD power cycles , 1993 .
[153] Adrian Bejan,et al. Thermodynamics of Energy Storage by Melting Due to Conduction or Natural Convection , 1990 .
[154] Helmut Müser. Thermodynamische Behandlung von Elektronenprozessen in Halbleiter-Randschichten , 1957 .
[155] Ahmet Selamet,et al. Entropy production in boundary layers , 1990 .
[156] Jeffrey M. Gordon,et al. Thermodynamic modeling of reciprocating chillers , 1994 .
[157] F. Angulo-Brown,et al. Compression ratio of an optimized air standard Otto-cycle model , 1994 .
[158] A. Bejan,et al. Convection in Porous Media , 1992 .
[159] Ahmet Selamet,et al. Entropy production in flames , 1988 .
[160] Adrian Bejan,et al. Exergy conservation in parallel thermal insulation systems , 1983 .
[161] Orlov,et al. Power output from an irreversible heat engine with a nonuniform working fluid. , 1990, Physical review. A, Atomic, molecular, and optical physics.
[162] Hajime Nakamura,et al. Optimum Efficiencies and Phase Change Temperatures in Latent Heat Storage Systems , 1994 .
[163] M. Shiino,et al. Thermal regenerator analysis: analytical solution for effectiveness and entropy production in regenerative process , 1989 .
[164] F. Kreith,et al. Principles of heat transfer , 1962 .
[165] Vedat S. Arpaci,et al. Radiative Entropy Production—Heat Lost to Entropy , 1991 .
[166] A. Bejan,et al. Fin Geometry for Minimum Entropy Generation in Forced Convection , 1982 .
[167] Chih Wu,et al. Finite-time thermodynamic analysis of a Carnot engine with internal irreversibility , 1992 .
[168] Adrian Bejan,et al. Evaluation of heat transfer augmentation techniques based on their impact on entropy generation , 1980 .
[169] Chin-Hsiang Cheng,et al. Numerical predictions of entropy generations for mixed convective flows in a vertical channel with transverse fin array , 1994 .
[170] R. Krane,et al. A Second Law analysis of the optimum design and operation of thermal energy storage systems , 1987 .
[171] J. R. Senft. Pressurization effects in kinematic heat engines , 1991 .
[172] D. H. Johnson. The exergy of the ocean thermal resource and analysis of second-law efficiencies of idealized ocean thermal energy conversion power cycles , 1983 .
[173] Lixuan Chen,et al. The effect of heat‐transfer law on performance of a two‐heat‐source endoreversible cycle , 1989 .
[174] Sanford Klein. Design Considerations for Refrigeration Cycles , 1992 .
[175] Peter H. Richter,et al. The efficiency of engines operating around a steady state at finite frequencies , 1978 .
[176] Michael J. Moran,et al. Availability analysis: A guide to efficient energy use , 1982 .
[177] J Steel,et al. Computer Integrated Manufacturing: A Case Study in the Development of Thermoplastic Seals , 1987 .
[178] Victor Fairén,et al. On the efficiency of thermal engines with power output: Harmonically driven engines , 1981 .
[179] S. Petrescu. COMMENTS ON : THE OPTIMAL SPACING OF PARALLEL PLATES COOLED BY FORCED CONVECTION , 1994 .
[180] Adrian Bejan,et al. The Melting of an Ice Shell on a Heated Horizontal Cylinder , 1994 .
[181] Kalyan Annamalai,et al. Optimization of air-cooled condensers , 1987 .
[182] R. D. Spence,et al. Speed dependence of the efficiency of heat engines , 1985 .
[183] Fernando Angulo-Brown,et al. An ecological optimization criterion for finite‐time heat engines , 1991 .
[184] Bjarne Andresen,et al. Optimal staging of endoreversible heat engines , 1980 .
[185] Ch. Charach. Second-Law Efficiency of an Energy Storage-Removal Cycle in a Phase-Change Material Shell-and-Tube Heat Exchanger , 1993 .
[186] M. Conti,et al. Phase change energy storage: Entropy production, irreversibility, and second law efficiency , 1994 .
[187] Allan J. Organ,et al. Thermodynamics and Gas Dynamics of the Stirling Cycle Machine , 1992 .
[188] Luca A. Tagliafico,et al. Second Law Performance Analysis for Offset Strip-Fin Heat Exchangers , 1991 .
[189] Jeffrey M. Gordon,et al. Performance characteristics of endoreversible chemical engines , 1993 .
[190] Adrian Bejan,et al. Thermodynamic Optimization of Phase-Change Energy Storage Using Two or More Materials , 1992 .
[191] A. De Vos,et al. On the thermodynamic limit of photovoltaic energy conversion , 1981 .
[192] Adrian Bejan,et al. Thermodynamic optimization of mechanical supports for cryogenic apparatus , 1974 .
[193] Chih Wu,et al. Finite-Time Thermodynamics and Endoreversible Heat Engines , 1993 .
[194] J. H. Kim,et al. Thermodynamics of energy extraction from fractured hot dry rock , 1992 .
[195] Adrian Bejan,et al. Correlation of optimal sizes of bodies with external forced convection heat transfer , 1994 .
[196] M. A. Rosen,et al. Exergy Analysis for the Evaluation of the Performance of Closed Thermal Energy Storage Systems , 1988 .
[197] A. Bejan. The Concept of Irreversibility in Heat Exchanger Design: Counterflow Heat Exchangers for Gas-to-Gas Applications , 1977 .
[198] Adrian Bejan,et al. Engineering advances on finite‐time thermodynamics , 1994 .
[199] Adrian Bejan,et al. General criterion for rating heat-exchanger performance , 1978 .
[200] G. Alefeld,et al. Efficiency of compressor heat pumps and refrigerators derived from the second law of thermodynamics , 1987 .