Mechanical and structural characterization of electrospun PAN-derived carbon nanofibers

The mechanical and structural properties of individual electrospun PAN-derived carbon nanofibers are presented. EELS spectra of the carbonized nanofibers shows the Catoms to be partitioned into � 80% sp 2 bonds and � 20% sp 3 bonds which agrees with the observed structural disorder in the fibers. TEM images show a skin-core structure for the fiber cross-section. The skin region contains layered planes oriented predominantly parallel to the surface, but there are some crystallites in the skin region misoriented with respect to the fiber long axis. Microcombustion analysis showed 89.5% carbon, 3.9% nitrogen, 3.08% oxygen and 0.33% hydrogen. Mechanical testing was performed on individual carbonized nanofibers a few microns in length and hundreds of nanometers in diameter. The bending modulus was measured by a mechanical resonance method and the average modulus was 63 GPa. The measured fracture strengths were analyzed using a Weibull statistical distribution. The Weibull fracture stress fit to this statistical distribution was 0.64 GPa with a failure probability of 63%. � 2005 Elsevier Ltd. All rights reserved.

[1]  E. Zussman,et al.  Formation of nanofiber crossbars in electrospinning , 2003 .

[2]  Haihui Ye,et al.  Electrospinning of Continuous Carbon Nanotube‐Filled Nanofiber Yarns , 2003 .

[3]  Eyal Zussman,et al.  Mechanics of hydrogenated amorphous carbon deposits from electron-beam-induced deposition of a paraffin precursor , 2005 .

[4]  E. Fitzer.  Pan-based carbon fibers—present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parameters , 1989 .

[5]  J. Santiago-Avilés,et al.  Raman characterization of carbon nanofibers prepared using electrospinning , 2003 .

[6]  P. Pötschke,et al.  Carbon nanofibers for composite applications , 2004 .

[7]  W. D. Heer,et al.  Electrostatic deflections and electromechanical resonances of carbon nanotubes , 1999, Science.

[8]  C. Lieber,et al.  The incredible shrinking circuit. , 2001, Scientific American.

[9]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[10]  C. Lieber.  The incredible shrinking circuit. , 2001 .

[11]  S. Sushanth Kumar,et al.  Polyacrylonitrile Single‐Walled Carbon Nanotube Composite Fibers , 2004 .

[12]  Eyal Zussman,et al.  Electrostatic field-assisted alignment of electrospun nanofibres , 2001 .

[13]  J. Bruley,et al.  Sputter deposition of dense diamond-like carbon films at low temperature , 1991 .

[14]  Bernhard Wietek.  Fibers , 1963, Fiber Concrete.

[15]  K. Yang,et al.  Preparation of carbonized fiber web from electrospinning of isotropic pitch , 2004 .

[16]  Darrell H. Reneker,et al.  Flat polymer ribbons and other shapes by electrospinning , 2001 .

[17]  Eyal Zussman,et al.  Upward needleless electrospinning of multiple nanofibers , 2004 .

[18]  M. Kotaki,et al.  A review on polymer nanofibers by electrospinning and their applications in nanocomposites , 2003 .

[19]  J. Robertson,et al.  Interpretation of Raman spectra of disordered and amorphous carbon , 2000 .

[20]  Darrell H. Reneker,et al.  Carbon nanofibers from polyacrylonitrile and mesophase pitch , 1999 .

[21]  M. S. Dresselhaus,et al.  Model for Raman scattering from incompletely graphitized carbons , 1982 .

[22]  J. Sader,et al.  Method for the calibration of atomic force microscope cantilevers , 1995 .

[23]  Robert B Abernethy,et al.  The New Weibull handbook : reliability and statistical analysis for predicting life, safety, supportability, risk, cost and warranty claims , 2004 .

[24]  M. Dresselhaus,et al.  Structural characterization of carbon nanofibers obtained by hydrocarbon pyrolysis , 2001 .

[25]  R. Young,et al.  Effect of fibre microstructure upon the modulus of PAN- and pitch-based carbon fibres , 1995 .

[26]  Mark J. Dyer,et al.  Three-dimensional manipulation of carbon nanotubes under a scanning electron microscope , 1999 .

[27]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[28]  A. Oberlin,et al.  Filamentous growth of carbon through benzene decomposition , 1976 .

[29]  W. Ruland,et al.  X-ray studies on the structure of polyacrylonitrile fibers , 1993 .

[30]  Liu Jie,et al.  Evolution of structure and properties of PAN precursors during their conversion to carbon fibers , 2003 .

[31]  P. Budd,et al.  Thermal stabilization of polyacrylonitrile fibres , 1999 .

[32]  D. J. Johnson.  Recent advances in studies of carbon fibre structure , 1980, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[33]  E. Altus.  Analysis of Bernoulli beams with 3D stochastic heterogeneity , 2003 .

[34]  A. S. Jayatilaka,et al.  Fracture of engineering brittle materials , 1979 .

[35]  Andreas Greiner,et al.  Electrospun nanofibers: Internal structure and intrinsic orientation , 2003 .

[36]  B. Warren.  X-Ray Diffraction in Random Layer Lattices , 1941 .

[37]  I. Ward,et al.  The variation of the d-spacings with stress in the hexagonal polymorph of polyacrylonitrile , 1994 .

[38]  H. Sano,et al.  A model for the structure and growth of carbon nanofibers synthesized by the CVD method using nickel as a catalyst , 2004 .

[39]  C. Galiotis,et al.  Characterization of PAN-based carbon fibres with laser Raman spectroscopy , 1996, Journal of Materials Science.

[40]  Darrell H. Reneker,et al.  Bending instability of electrically charged liquid jets of polymer solutions in electrospinning , 2000 .

[41]  D. Dikin,et al.  Resonance vibration of amorphous SiO2 nanowires driven by mechanical or electrical field excitation , 2003 .

[42]  M. Dresselhaus,et al.  Graphite fibers and filaments , 1988 .

[43]  S. Chand,et al.  Review Carbon fibers for composites , 2000 .

[44]  S. D. Hudson,et al.  Investigation of molecular orientation in melt-spun high acrylonitrile fibers , 2000 .

[45]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[46]  M. Matsuo,et al.  Small angle X-ray scattering from voids within fibers during the stabilization and carbonization stages , 2003 .

[47]  H. Pierson.  Handbook of carbon, graphite, diamond, and fullerenes , 1992 .