Robust Design Optimization of SPMSM for Robotic Actuator Considering Assembly Imperfection of Segmented Stator Core

To be used as a robotic actuator, a surface-mounted permanent magnet synchronous motor (SPMSM) requires a low cogging torque characteristic. The aim of this study is to analyze and reduce the cogging torque's variation due to the assembly imperfection of the segmented stator that is widely used in the SPMSM. Considering the interconnection of the stator segments, an equivalent modeling method of the segmented stator with assembly imperfection is introduced. In addition, the variation in the cogging torque caused by the assembly imperfection is mathematically evaluated. Then, a robust design process that incorporates a sensitivity analysis and a robust design optimization is proposed. By using the proposed design, a robust optimum design model was built and its validity was verified through Monte Carlo simulation and tests.

[1]  Sonja Kuhnt,et al.  Design and analysis of computer experiments , 2010 .

[2]  Bernhard Sendhoff,et al.  Robust Optimization - A Comprehensive Survey , 2007 .

[3]  Gary M. Bone,et al.  Design, Implementation and Control of an Improved Hybrid Pneumatic-Electric Actuator for Robot Arms , 2019, IEEE Access.

[4]  Yunhua Li,et al.  Temperature Prediction and Thermal Boundary Simulation Using Hardware-in-Loop Method for Permanent Magnet Synchronous Motors , 2016, IEEE/ASME Transactions on Mechatronics.

[5]  Jian-Xin Shen,et al.  Analysis of cogging torque in surface-mounted permanent magnet machines with segmented stators , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[6]  Andrew A. Goldenberg,et al.  Robust control of robot manipulators incorporating motor dynamics , 1993, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93).

[7]  Dirk P. Kroese,et al.  Random Number, Random Variable, and Stochastic Process Generation , 2012 .

[8]  Do-Hyun Kang,et al.  Tooth Shape Optimization for Cogging Torque Reduction of Transverse Flux Rotary Motor Using Design of Experiment and Response Surface Methodology , 2007, IEEE Transactions on Magnetics.

[9]  M.F. Momen,et al.  Analysis of Flux Leakage in a Segmented Core Brushless Permanent Magnet Motor , 2009, IEEE Transactions on Energy Conversion.

[10]  Z. Q. Zhu,et al.  Influence of Manufacturing Tolerances on Cogging Torque in Interior Permanent Magnet Machines with Eccentric and Sinusoidal Rotor Contours , 2017, IEEE Transactions on Industry Applications.

[11]  David A. Lowther,et al.  On the Role of Robustness in Multi-Objective Robust Optimization: Application to an IPM Motor Design Problem , 2016, IEEE Transactions on Magnetics.

[12]  Mark J. Anderson,et al.  Simple Comparative Experiments , 2017 .

[13]  Z. Q. Zhu,et al.  Sensitivity of Manufacturing Tolerances on Cogging Torque in Interior Permanent Magnet Machines With Different Slot/Pole Number Combinations , 2017, IEEE Transactions on Industry Applications.

[14]  Hua Zhu,et al.  Optimal design of a rod shape ultrasonic motor using sequential quadratic programming and finite element method , 2012 .

[15]  Z. Zhu,et al.  Influence of design parameters on cogging torque in permanent magnet machines , 1997 .

[16]  G. Ombach,et al.  Influence of Additional Air Gaps Between Stator Segments on Cogging Torque of Permanent-Magnet Machines Having Modular Stators , 2012, IEEE Transactions on Magnetics.

[17]  Md. Zakirul Islam,et al.  Design of a Robust Five-Phase Ferrite-Assisted Synchronous Reluctance Motor With Low Demagnetization and Mechanical Deformation , 2019, IEEE Transactions on Energy Conversion.

[18]  Raphael T. Haftka,et al.  Surrogate-based Analysis and Optimization , 2005 .

[19]  Ziyan Ren,et al.  Utilizing Kriging Surrogate Models for Multi-Objective Robust Optimization of Electromagnetic Devices , 2014, IEEE Transactions on Magnetics.

[20]  Thomas J. Santner,et al.  Design and analysis of computer experiments , 1998 .

[21]  Nick J. Baker,et al.  Design and Performance of a Segmented Stator Permanent Magnet Alternator for Aerospace , 2018, IEEE Transactions on Energy Conversion.

[22]  Paul T. Boggs,et al.  Sequential Quadratic Programming , 1995, Acta Numerica.

[23]  L. Lebensztajn,et al.  Kriging: a useful tool for electromagnetic device optimization , 2004, IEEE Transactions on Magnetics.

[24]  Martin Doppelbauer,et al.  Experimental and Theoretical Research on Cogging Torque of PM Synchronous Motors Considering Manufacturing Tolerances , 2018, IEEE Transactions on Industrial Electronics.

[25]  Mingyao Lin,et al.  Rotor design techniques for reducing the cogging torque in a novel dual-rotor axial field flux-switching permanent magnet machine , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[26]  M.S. Islam,et al.  Issues in reducing the cogging torque of mass-produced permanent-magnet brushless DC motor , 2004, IEEE Transactions on Industry Applications.

[27]  R. Fiser,et al.  Additional Cogging Torque Components in Permanent-Magnet Motors Due to Manufacturing Imperfections , 2009, IEEE Transactions on Magnetics.

[28]  Vincent Hayward,et al.  Do it yourself haptics: part I , 2007, IEEE Robotics & Automation Magazine.

[29]  Jung-Pyo Hong,et al.  Analysis of cogging torque caused by manufacturing tolerances of surface-mounted permanent magnet synchronous motor for electric power steering , 2016 .

[30]  Wyatt S. Newman,et al.  Experiments in torque control of the AdeptOne robot , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[31]  Tae Hee Lee,et al.  Robust Design: An Overview , 2006 .