Synthesis, experimental studies, and analysis of a new calcium-based carbon dioxide absorbent

A new kind of Ca-based regenerable CO2 absorbent, CaO/ Ca12Al14O33, was synthesized on the basis of the integration of CaO, as solid reactant, with a composite metal oxide Ca12Al14O33, as a binder, for applying it to repeated calcination/carbonation cycles. The carbonation reaction can be applied in many industrial processes, and it is important for practical calcination/carbonation processes to have absorbents with high performance. The cyclic carbonation reactivity of the new absorbent was investigated by TGA (thermogravimetric analysis). The effects of the ratio of active material to binder in the new absorbent, the mechanics for preparation, and the reaction process of the high-reactivity CaO/Ca12Al14O33 absorbent have been analyzed. The results obtained here indicate that the new absorbent, CaO/Ca12Al14O33, has a significantly improved CO2 absorption capacity and cyclic reaction stability compared with other Ca-based CO2 absorbents. These results suggest that this new absorbent is promising in the ap...

[1]  J. C. Abanades,et al.  Conversion Limits in the Reaction of CO2 with Lime , 2003 .

[2]  C. M. White,et al.  Separation and Capture of CO2 from Large Stationary Sources and Sequestration in Geological Formations—Coalbeds and Deep Saline Aquifers , 2003, Journal of the Air & Waste Management Association.

[3]  J. C. Abanades The maximum capture efficiency of CO2 using a carbonation/calcination cycle of CaO/CaCO3 , 2002 .

[4]  Y. S. Lin,et al.  Mechanism of high-temperature CO2 sorption on lithium zirconate. , 2003, Environmental science & technology.

[5]  Hitoki Matsuda,et al.  Study of Carbonation Reactions of Ca-Mg Oxides for High Temperature Energy Storage and Heat Transformation , 1996 .

[6]  Robert H. Borgwardt,et al.  Calcium oxide sintering in atmospheres containing water and carbon dioxide , 1989 .

[7]  L. Fan,et al.  Carbonation−Calcination Cycle Using High Reactivity Calcium Oxide for Carbon Dioxide Separation from Flue Gas , 2002 .

[8]  Yoshizo Suzuki,et al.  Developing an innovative method, HyPr-RING, to produce hydrogen from hydrocarbons , 2002 .

[9]  Douglas P. Harrison,et al.  Hydrogen Production Using Sorption-Enhanced Reaction , 2001 .

[10]  A. L. Ortíz,et al.  Hydrogen from methane in a single-step process , 1999 .

[11]  Douglas P. Harrison,et al.  Simultaneous shift reaction and carbon dioxide separation for the direct production of hydrogen , 1994 .

[12]  Jerald A. Cole,et al.  Unmixed combustion: an alternative to fire , 2000 .

[13]  A. M. Squires Cyclic Use of Calcined Dolomite to Desulfurize Fuels Undergoing Gasification , 1967 .

[14]  Y. Kato,et al.  UTILIZATION OF HIGH TEMPERATURE HEAT USING A CALCIUM OXIDE / LEAD OXIDE / CARBON DIOXIDE CHEMICAL HEAT PUMP , 1997 .

[15]  R. German,et al.  Surface Area Reduction During Isothermal Sintering , 1976 .

[16]  Yoshio Yoshizawa,et al.  Kinetic feasibility of a chemical heat pump for heat utilization of high-temperature processes , 1999 .

[17]  Masahiro Kato,et al.  Carbon dioxide absorption by lithium orthosilicate in a wide range of temperature and carbon dioxide concentrations , 2002 .

[18]  R. Barker,et al.  The reversibility of the reaction CaCO3 ⇄ CaO+CO2 , 2007 .