Determination of the nonradiative conversion efficiency of lead mixed-halide perovskites using optical and photothermal spectroscopy.

Mixed-halide organic-inorganic hybrid perovskites are considered promising light-absorbing materials in the development of solar cells related to the obtained high-power conversion efficiency. Current efforts are focused on the study of the energy-conversion mechanisms, where the nonradiative recombination pathway is the least explored. In this work, a combination of optical and photoacoustic spectroscopies is used to determine the visible spectral light-into-heat conversion efficiency of lead-based mixed-halide organic-inorganic hybrid perovskites in a semicomplete n-i-p mesoscopic perovskite solar cell (PSC). A remarkable average conversion efficiency of about 87% has been found for the nonradiative combination in the perovskite, with the estimated composition ${{\rm FA}_{0.71}}{{\rm MA}_{0.29}}{{\rm PbI}_{2.9}}{{\rm Br}_{0.1}}$FA0.71MA0.29PbI2.9Br0.1 in the wavelength range of 400 to 800 nm. As a result, 13% of the incident light is transformed in radiative recombination processes and/or photodegradation of the material. Furthermore, the extinction coefficient and refractive index of the material are reported, and it was found that the optical constants and the optical absorption in the short-wavelength range are significantly smaller than previously reported for${{\rm MAPbI}_3}$MAPbI3.

[1]  Leone Spiccia,et al.  Ultra-thin high efficiency semitransparent perovskite solar cells , 2015 .

[2]  Nripan Mathews,et al.  Low-temperature solution-processed wavelength-tunable perovskites for lasing. , 2014, Nature materials.

[3]  Peng Gao,et al.  Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting. , 2014, Angewandte Chemie.

[4]  C. Ballif,et al.  Organic-inorganic halide perovskite/crystalline silicon four-terminal tandem solar cells. , 2015, Physical chemistry chemical physics : PCCP.

[5]  J. Ordonez-Miranda,et al.  Measurement of the hysteretic thermal properties of W-doped and undoped nanocrystalline powders of VO2 , 2019, Scientific Reports.

[6]  H. Walther,et al.  Photothermal radiometry of infrared translucent materials , 1997 .

[7]  Saif A. Haque,et al.  Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells , 2016 .

[8]  M. Green,et al.  Room temperature optical properties of organic-inorganic lead halide perovskites , 2015 .

[9]  Ivan Mora-Sero,et al.  Effect of Mesostructured Layer upon Crystalline Properties and Device Performance on Perovskite Solar Cells. , 2015, The journal of physical chemistry letters.

[10]  Mohammad Khaja Nazeeruddin,et al.  Predicting the Open‐Circuit Voltage of CH3NH3PbI3 Perovskite Solar Cells Using Electroluminescence and Photovoltaic Quantum Efficiency Spectra: the Role of Radiative and Non‐Radiative Recombination , 2015 .

[11]  J. J. Alvarado-Gil,et al.  Photothermal characterization of the thermal properties of materials using four characteristic modulation frequencies in two-layer systems , 2012 .

[12]  Bernd Rech,et al.  A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells , 2016, Science.

[13]  V. Dossetti,et al.  Thermal properties of composite materials with a complex fractal structure , 2014, 1404.6475.

[14]  C. Champeaux,et al.  Thermal hysteresis measurement of the VO2 dielectric function for its metal-insulator transition by visible-IR ellipsometry , 2018, Journal of Applied Physics.

[15]  M. Green,et al.  Optical analysis of perovskite/silicon tandem solar cells , 2016 .

[16]  N. Park,et al.  A TiO2 embedded structure for perovskite solar cells with anomalous grain growth and effective electron extraction , 2017 .

[17]  J. J. Alvarado-Gil,et al.  On the use of photothermal techniques for the characterization of solar-selective coatings , 2018 .

[18]  Peng Gao,et al.  Efficient luminescent solar cells based on tailored mixed-cation perovskites , 2016, Science Advances.

[19]  Corinne Champeaux,et al.  Thermophysical characterisation of VO2 thin films hysteresis and its application in thermal rectification , 2019, Scientific Reports.

[20]  Allen Gersho,et al.  Photoacoustic Effect with Solids: A Theoretical Treatment , 1975, Science.

[21]  Li-ping Zhu,et al.  Improving Efficiency and Reproducibility of Perovskite Solar Cells through Aggregation Control in Polyelectrolytes Hole Transport Layer. , 2017, ACS applied materials & interfaces.

[22]  C. B. Nielsen,et al.  Highly efficient perovskite solar cells with crosslinked PCBM interlayers , 2017 .

[23]  M. Islam,et al.  Mixed A-Cation Perovskites for Solar Cells: Atomic-Scale Insights Into Structural Distortion, Hydrogen Bonding, and Electronic Properties , 2018, Chemistry of Materials.

[24]  R. Medina-Esquivel,et al.  Study of thermal conductivity of magnetorheological fluids using the thermal-wave resonant cavity and its relationship with the viscosity , 2017 .

[25]  J. A. Balderas-López Self-normalized photoacoustic technique for thermal diffusivity measurements of transparent materials. , 2008, The Review of scientific instruments.

[26]  Anders Hagfeldt,et al.  Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells , 2016 .

[27]  Allen Gersho,et al.  Theory of the photoacoustic effect with solids , 1975 .

[28]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[29]  S. Priya,et al.  Improved Phase Stability of Formamidinium Lead Triiodide Perovskite by Strain Relaxation , 2016 .

[30]  J. J. Alvarado-Gil,et al.  Thermal characterization of magnetically aligned carbonyl iron/agar composites. , 2014, Carbohydrate polymers.

[31]  A. Mandelis Photoacoustic determination of the non-radiative quantum efficiency of uranyl formate monohydrate, UO2(HCOO)2·H2O, powders , 1982 .

[32]  F. Firszt,et al.  Study of optical properties of Zn1-xBexTe mixed crystals by means of combined modulated IR radiometry and photoacoustics , 2004 .

[33]  H. Boyen,et al.  Band Gap Tuning via Lattice Contraction and Octahedral Tilting in Perovskite Materials for Photovoltaics. , 2017, Journal of the American Chemical Society.

[34]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[35]  Jun-Seok Yeo,et al.  Planar heterojunction perovskite solar cells with superior reproducibility , 2014, Scientific Reports.

[36]  Anders Hagfeldt,et al.  Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5ee03874j Click here for additional data file. , 2016, Energy & environmental science.

[37]  H. Bolink,et al.  Efficient photovoltaic and electroluminescent perovskite devices. , 2015, Chemical communications.

[38]  Andreas Mandelis,et al.  Thermal-wave resonator cavity design and measurements of the thermal diffusivity of liquids , 2000 .

[39]  Xuguang Liu,et al.  Accelerated formation and improved performance of CH3NH3PbI3-based perovskite solar cells via solvent coordination and anti-solvent extraction , 2017 .

[40]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[41]  M. Ersoz,et al.  Solvent washing with toluene enhances efficiency and increases reproducibility in perovskite solar cells , 2016 .

[42]  J. J. Alvarado-Gil,et al.  Polarized light transmission in ferrofluids loaded with carbon nanotubes in the presence of a uniform magnetic field , 2014 .

[43]  M. Green,et al.  Optical modelling data for room temperature optical properties of organic–inorganic lead halide perovskites , 2015, Data in brief.

[44]  P. Pikhitsa,et al.  Trapped charge-driven degradation of perovskite solar cells , 2016, Nature Communications.

[45]  Michael Grätzel,et al.  Highly efficient planar perovskite solar cells through band alignment engineering , 2015 .

[46]  Xiaohui Qiu,et al.  A Biopolymer Heparin Sodium Interlayer Anchoring TiO2 and MAPbI3 Enhances Trap Passivation and Device Stability in Perovskite Solar Cells , 2018, Advanced materials.