Methods of reliability assessment of heterogeneous redundant systems

Abstract Reliability assessment is required for the determination of a safety integrity level (SIL) of safety systems in accordance to the functional safety approach. Functional safety standards suggest formulas for calculating PFD/PFH which numerical values are used for establishing correspondence to the SIL. However these formulas cannot be used for heterogeneous redundant systems with a combination of mechanical, electronic/electrical components and constant and non-constant failure rates. In this paper we present an overview of reliability assessment methods that are able to cope with these features of heterogeneous redundant systems, show their advantages, drawbacks and limitations in application.

[1]  J Chudoba.  Modelling of dynamical dependability by using stochastic processes , 2011 .

[2]  Enrico Zio,et al.  The Monte Carlo Simulation Method for System Reliability and Risk Analysis , 2012 .

[3]  A. Z. Keller,et al.  Reliability analysis of commercial vehicle engines , 1985 .

[4]  T. Iesmantas R. Alzbutas.  Critical infrastructure Maintenance of power systems considering time-dependent uncertainty , 2014 .

[5]  Boris Harlamov,et al.  Continuous Semi-Markov Processes , 2008 .

[6]  R. Bell,et al.  IEC 61508: functional safety of electrical/electronic/ programme electronic safety-related systems: overview , 1999 .

[7]  Vipul Jain,et al.  Availability Analysis of Repairable Mechanical Systems Using Analytical Semi-Markov Approach , 2013 .

[8]  Franciszek Grabski,et al.  Semi-Markov Processes: Applications in System Reliability and Maintenance , 2014 .

[9]  Rajendra Kumar,et al.  Accurate reliability modeling using Markov Analysis with non-constant hazard rates , 2009, 2009 IEEE Aerospace conference.

[10]  David McMillan,et al.  Optimum CTV fleet selection for offshore wind farm O&M activities , 2014 .

[11]  Mary Ann Lundteigen,et al.  Analytical formulas of PFD calculation for systems with non-constant failure rates , 2015 .

[12]  Manju Agarwal,et al.  Reliability evaluation and optimal design in heterogeneous multi-state series-parallel systems , 2011, Inf. Sci..

[13]  N. Limnios,et al.  Semi-Markov Processes and Reliability , 2012 .

[14]  Jeff Jones,et al.  Estimation of system reliability using a "non-constant failure rate" model , 2001, IEEE Trans. Reliab..

[15]  M. Rausand.  Reliability of Safety-Critical Systems: Theory and Applications , 2014 .

[16]  I. I. Ezhov,et al.  Semi-Markov processes and their applications , 1967 .

[17]  I. Gertsbakh.  Asymptotic methods in reliability theory: a review , 1984, Advances in Applied Probability.

[18]  Liudong Xing,et al.  Redundancy allocation for k-out-of-n: G systems with mixed spare types , 2012, 2012 Proceedings Annual Reliability and Maintainability Symposium.

[19]  Eric R. Ziegel,et al.  System Reliability Theory: Models, Statistical Methods, and Applications , 2004, Technometrics.

[20]  Xiaohu Li,et al.  Optimal Allocation of Active Redundancies to k-out-of-n Systems with Heterogeneous Components , 2010, Journal of Applied Probability.

[21]  A. Hildebrandt.  Calculating the "Probability of Failure on Demand" (PFD) of complex structures by means of Markov Models , 2007, 2007 4th European Conference on Electrical and Instrumentation Applications in the Petroleum & Chemical Industry.

[22]  P. Dersin,et al.  Selecting test and maintenance strategies to achieve availability target with lowest life-cycle cost , 2008, 2008 Annual Reliability and Maintainability Symposium.

[23]  C Soares,et al.  An age-based preventive maintenance for offshore wind turbines , 2014 .

[24]  Yong Wang,et al.  Heterogeneous Redundancy Allocation for Series-Parallel Multi-State Systems Using Hybrid Particle Swarm Optimization and Local Search , 2012, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[25]  Herbert Hecht,et al.  Systems Reliability and Failure Prevention , 2003 .