New Approaches in Tool Path Optimization of CNC Machining: A Review

Computer numerical control (CNC) machines have been widely used in automotive manufacturing industries especially of machining operation in automotive part such as engine body and cylinder. One of the key features that improve efficiency of CNC machining is through the optimization of tool path. Previous researcher to optimize tool path has premeditated several approaches. This paper aims to provide a critical review of those approaches that have been developed in tool path. The developed tool path approaches covered different types of machining process under various constraints condition. This paper focuses on tool path generation in CNC machining such as milling and cutting process. Based on our finding, this review paper collects information on tool path optimization and recommends future research direction.

[1]  Yuan-Shin Lee,et al.  Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining , 1998, Comput. Aided Des..

[2]  Aitzol Lamikiz,et al.  Toolpath selection based on the minimum deflection cutting forces in the programming of complex surfaces milling , 2007 .

[3]  Stefan Schäffler,et al.  Dual Spherical Spline and Its Application in Tool Path Planing for 5-Axis Flank Milling , 2011, ICCV 2011.

[4]  Bert Lauwers,et al.  Optimal and collision free tool posture in five-axis machining through the tight integration of tool path generation and machine simulation , 2003, Comput. Aided Des..

[5]  Chih-Ching Lo,et al.  A new approach to CNC tool path generation , 1998, Comput. Aided Des..

[6]  Yoram Koren,et al.  Efficient Tool-Path Planning for Machining Free-Form Surfaces , 1996 .

[7]  Tao Chen,et al.  A tool path generation strategy for three-axis ball-end milling of free-form surfaces , 2008 .

[8]  Zuomin Dong,et al.  Automated surface subdivision and tool path generation for 3½½-axis CNC machining of sculptured parts , 2003, Comput. Ind..

[9]  Byoung Kyu Choi,et al.  Guide surface based tool path generation in 3-axis milling: an extension of the guide plane method , 2000, Comput. Aided Des..

[10]  Rong-Shine Lin,et al.  An improved method for scheduling the tool paths for three-axis surface machining , 2001 .

[11]  Wei Wang,et al.  A feature-based method for NC machining time estimation , 2013 .

[12]  Franci Cus,et al.  Optimization of cutting process by GA approach , 2003 .

[13]  Gaohua Liao,et al.  Cutting Parameter Optimization Based on Particle Swarm Optimization , 2009, 2009 Second International Conference on Intelligent Computation Technology and Automation.

[14]  Chih-Ching Lo,et al.  Real-time generation and control of cutter path for 5-axis CNC machining , 1999 .

[15]  Mario T. Tabucanon,et al.  On the tool-path optimization of a milling robot , 2002 .

[16]  Hong-Tzong Yau,et al.  A new approach to z-level contour machining of triangulated surface models using fillet endmills , 2005, Comput. Aided Des..

[17]  Zafer Bingul,et al.  Application of heuristic and hybrid-GASA algorithms to tool-path optimization problem for minimizing airtime during machining , 2009, Eng. Appl. Artif. Intell..

[18]  Xun Xu,et al.  Numerical control machining simulation: a comprehensive survey , 2011, Int. J. Comput. Integr. Manuf..

[19]  Hsi-Yung Feng,et al.  Constant scallop-height tool path generation for three-axis sculptured surface machining , 2002, Comput. Aided Des..

[20]  Ismail Lazoglu,et al.  Tool path optimization for free form surface machining , 2009 .

[21]  Chuang-Jang Chiou,et al.  A machining potential field approach to tool path generation for multi-axis sculptured surface machining , 2002, Comput. Aided Des..

[22]  Matthieu Rauch,et al.  Improving trochoidal tool paths generation and implementation using process constraints modelling , 2009 .

[23]  S. Shanmugasundaram,et al.  Optimization of machining parameters using genetic algorithm and experimental validation for end-milling operations , 2007 .

[24]  Ye Li,et al.  Machinability analysis for 3-axis flat end milling , 2006 .

[25]  Paul C. Xirouchakis,et al.  Parametric tool correction algorithm for 5-axis machining , 2005, Adv. Eng. Softw..

[26]  Z. Y. Zhao,et al.  Pocketing toolpath optimization for sharp corners , 2007 .

[27]  Suk-Hwah Suh,et al.  Neural network modeling for tool path planning of the rough cut in complex pocket milling , 1996 .

[28]  Pierre Bourdet,et al.  A new format for 5-axis tool path computation, using Bspline curves , 2004, Comput. Aided Des..

[29]  S. S. Pande,et al.  Intelligent tool path correction for improving profile accuracy in CNC turning , 2000 .

[30]  Ghassan Al-Kindi,et al.  An Approach to Improved CNC Machining Using Vision-Based System , 2012 .

[31]  Dong-Soo Kim,et al.  Tool path generation for clean-up machining by a curve-based approach , 2005, Comput. Aided Des..

[32]  Lo Chih-Ching,et al.  A new approach to CNC tool path generation , 1998 .

[33]  Aydin Nassehi,et al.  A novel methodology for cross-technology interoperability in CNC machining , 2013 .

[34]  José García Rodríguez,et al.  Efficient tool path computation using multi-core GPUs , 2013, Comput. Ind..

[35]  Pascal Ray,et al.  The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation , 2008, Comput. Aided Des..

[36]  Erkan Ülker,et al.  An artificial immune system approach to CNC tool path generation , 2009, J. Intell. Manuf..