Fabrication of a novel contact-enhanced horizontal sensitive inertial micro-switch with electroplating nickel

Abstract A nickel MEMS inertia switch with horizontal single sensitive direction has been designed and fabricated on quartz substrate based on surface micromachining technology. MEMS inertia switch consisting of three main parts: the proof mass suspended by the folded springs as the movable electrode, the upper beam and back pillars as a barrier system and the forward novel L-shaped elastic cantilever beams as the fixed electrode. The threshold acceleration of designed inertial micro-switch is analyzed and predicted. The stiffness of folded spring has been simulated, which indicates that it is much stiffer in one direction than the other two ones. The simulation of dynamic contact process of the model demonstrates that the threshold acceleration of designed micro-switch is about 18 g and contact time is about 210 μs when the applied shock pulse width period is 0.006 s. The modal analysis and the simulation of impact process in non-sensitive direction reveal the designed structure has a good reliability. The fabricated micro-switch has been tested by dropping hammer system, and the test results show that the threshold acceleration is about 18 g and contact time is about 216 μs, which are in good agreement with those simulated ones.

[1]  Josef Binder,et al.  Additive electroplating technology as a post-CMOS process for the production of MEMS acceleration-threshold switches for transportation applications , 2000 .

[2]  Guifu Ding,et al.  A MEMS Inertia Switch With Bridge-Type Elastic Fixed Electrode for Long Duration Contact , 2008, IEEE Transactions on Electron Devices.

[3]  T Tønnesen,et al.  Low-cost post-CMOS integration of electroplated microstructures for inertial sensing , 2000 .

[4]  L. Zimmermann,et al.  Airbag application: a microsystem including a silicon capacitive accelerometer, CMOS switched capacitor electronics and true self-test capability , 1995 .

[5]  G. Ding,et al.  A directly strain measuring method for electroplated nickel micro-tensile test , 2010 .

[6]  Hong Wang,et al.  Development of a Novel MEMS Inertial Switch With a Compliant Stationary Electrode , 2009, IEEE Sensors Journal.

[7]  Andrew J. Kurdila,et al.  『Fundamentals of Structural Dynamics』(私の一冊) , 2019, Journal of the Society of Mechanical Engineers.

[8]  Guifu Ding,et al.  Analytical model of squeeze film damping for microelectromechanical systems structures with anti-stiction raised strips , 2010 .

[9]  Guifu Ding,et al.  Modeling, Simulation and Characterization of a Micromachined Acceleration Switch With Anti-Stiction Raised Strips on the Substrate , 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[10]  T Tønnesen,et al.  Simulation, design and fabrication of electroplated acceleration switches , 1997 .

[11]  Guifu Ding,et al.  The design, simulation and fabrication of a novel horizontal sensitive inertial micro-switch with low g value based on MEMS micromachining technology , 2013 .

[12]  Xiaolin Zhao,et al.  Design and characterisation of an inertial microswitch with electrophoretic polymer-metal composite fixed electrode for extending contact time , 2012 .