Cyclic Tests on External RC Beam-Column Joints: Role of Seismic Design Level and Axial Load Value on the Ultimate Capacity

A wide experimental program on beam-column RC joints carried out in the framework of the DPC-Reluis Project (DPC: Department of Civil Protection, Reluis: Network of University Laboratories of Earthquake Engineering) is presented. All the experimental tests were performed at the Laboratory of Structures of the University of Basilicata, Potenza, Italy. The main objective of the experimental campaign is to study and compare the post-elastic behavior of beam-column joints with different earthquake-resistant design levels, indicating the role of some structural parameters such as the axial load value acting on the column, beam dimensions, and steel type, on the joint performances and failure mechanism. The analyses have mainly been devoted to improving the assessment procedures regarding existing buildings but also to verifying the prediction capability of the capacity models relevant to beam-column joints contained in literature and in the new seismic codes. Following a short description of the experimental methodologies used in other campaigns, the experimental program is presented, providing a detailed description of the specimens and of the testing set-up. This is followed by a report of the main results of the cyclic tests performed on the beam-column specimens that highlight the role played by axial load and seismic design level in determining the failure mechanism and the global response of the joints.

[1]  Angelo Masi,et al.  Selection of Natural and Synthetic Accelerograms for Seismic Vulnerability Studies on Reinforced Concrete Frames , 2011 .

[2]  A. Helba,et al.  Reinforced Concrete Structures , 1944, Nature.

[3]  R. Park,et al.  Seismic Load Tests on Interior and Exterior Beam-Column Joints with Substandard Reinforcing Details , 2000 .

[4]  Tomislav Kišiček,et al.  Reinforced concrete structures 1 , 2014 .

[5]  Shyh-Jiann Hwang,et al.  SEISMIC DESIGN AND DETAILING OF EXTERIOR REINFORCED CONCRETE BEAM-COLUMN JOINTS , 2002 .

[6]  M. Fardis,et al.  Deformations of Reinforced Concrete Members at Yielding and Ultimate , 2001 .

[7]  Angelo Masi,et al.  Seismic Vulnerability Assessment of Gravity Load Designed R/C Frames , 2003 .

[8]  Myoungsu Shin,et al.  Modeling of cyclic joint shear deformation contributions in RC beam-column connections to overall frame behavior , 2004 .

[9]  Domenico Salvatore Nigro,et al.  Meccanismi di risposta di nodi trave-pilastro in c.a. di strutture non antisismiche , 2001 .

[10]  Mervyn J. Kowalsky,et al.  Displacement-based seismic design of structures , 2007 .

[11]  Stefano Pampanin,et al.  Seismic Behavior of R.C. Beam-Column Joints Designed for Gravity Only , 2002 .

[12]  Amadeo Benavent-Climent,et al.  Exterior wide beam–column connections in existing RC frames subjected to lateral earthquake loads , 2009 .

[13]  Lawrence D. Reaveley,et al.  Performance-Based Evaluation of Exterior Reinforced Concrete Building Joints for Seismic Excitation , 2000 .

[14]  Stefano Pampanin,et al.  RELEVANCE OF BEAM-COLUMN JOINT DAMAGE AND COLLAPSE IN RC FRAME ASSESSMENT , 2002 .

[15]  Farzad Naeim,et al.  The Seismic Design Handbook , 1989 .

[16]  G. Calvi,et al.  SEISMIC BEHAVIOUR OF R . C . BEAM-COLUMN JOINTS DESIGNED FOR GRAVITY LOADS , 2001 .

[17]  R. Park,et al.  A SUMMARY OF RESULTS OF SIMULATED SEISMIC LOAD TESTS ON REINFORCED CONCRETE BEAM-COLUMN JOINTS, BEAMS AND COLUMNS WITH SUBSTANDARD REINFORCING DETAILS , 2002 .

[18]  Gert Heshe,et al.  DS/ENV 1992-1-1 NAD. National Application Document for Eurocode 2: Design of Concrete Structures, Part 1-1: General Rules and Rules for Buildings , 1993 .

[19]  H. Shiohara.  New Model for Shear Failure of RC Interior Beam-Column Connections , 2001 .

[20]  C. Murty,et al.  Effectiveness of Reinforcement Details in Exterior Reinforced Concrete Beam-Column Joints for Earthquake Resistance , 2003 .