Dry release of all-polymer structures

We present a simple dry release technique which uses a thin fluorocarbon film for efficient removal of plastic microdevices from a mould or a handling substrate by reducing the adhesion between the two. This fluorocarbon film is deposited on the substrate in an advanced Si dry etch device utilising the C"4F"8 passivation plasma. Micromachined polymer chips made of SU-8 are removed from the handling substrate by lifting them off using mechanical tweezers. Effective release of chips of several mm^2 size within a few seconds and the lift-off of fragile, [email protected] cantilevers at a yield of almost 100% were demonstrated on wafer-scale. The fluorocarbon film showed excellent compatibility with metal etch processes and polymer baking and curing steps. It further facilitates demoulding of polydimethylsiloxane stamps suitable for soft-lithography.

[1]  H. Knapp,et al.  Atomic force microscope measurements and manipulation of Langmuir-Blodgett films with modified tips. , 1995, Biophysical journal.

[2]  D. Reinhoudt,et al.  A self-assembled monolayer-assisted surface microfabrication and release technique , 2001 .

[3]  M. Schmidt,et al.  Characterization of a Time Multiplexed Inductively Coupled Plasma Etcher , 1999 .

[4]  N. D. Rooij,et al.  Soft, entirely photoplastic probes for scanning force microscopy , 1999 .

[5]  Chang Liu,et al.  A mould-and-transfer technology for fabricating scanning probe microscopy probes , 2004 .

[6]  Anja Boisen,et al.  Adsorption kinetics and mechanical properties of thiol-modified DNA-oligos on gold investigated by microcantilever sensors. , 2002, Ultramicroscopy.

[7]  Laura M. Lechuga,et al.  Polymeric cantilever arrays for biosensing applications , 2003 .

[8]  P. Vettiger,et al.  Polymer-based stress sensor with integrated readout , 2002 .

[9]  T. Fujii,et al.  Handling of Picoliter Liquid Samples in a Poly(dimethylsiloxane)-Based Microfluidic Device , 1999 .

[10]  M. Schmidt,et al.  A novel integrated MEMS process using fluorocarbon films deposited with a Deep Reactive Ion Etching (DRIE) tool , 1999 .

[11]  Jian Zhang,et al.  Polymerization optimization of SU-8 photoresist and its applications in microfluidic systems and MEMS , 2001 .

[12]  Carlos H. Mastrangelo,et al.  Elimination of post-release adhesion in microstructures using conformal fluorocarbon coatings , 1997 .