An inter lab comparison of gas transport testing procedures: Oxygen permeability and oxygen diffusivity

Abstract The transport properties of concrete are useful measurements as they can provide a potential indication of durability and can be used in the prediction of the service life of concrete elements. Gas permeability and diffusivity test methods are attractive due to the ease of testing, their non-destructive nature and their potential to correlate to in-field carbonation of reinforced concrete structures. Unfortunately, limited information is available on the variability and inter-laboratory variability of the test methods that assess gas transport. This paper presents results of a recent investigation on the repeatability/variability of an oxygen permeameter and of an oxygen diffusivity instrument in two testing laboratories. Generally, a lower variability was seen for the oxygen diffusivity measurements compared to oxygen permeability. Moreover, the results confirm the importance of several parameters such as the flow and pressure used in the test and the samples conditioning method (degree of saturation and percentage of mass variation). In order to obtain repeatable results from gas transport testing between labs, the same boundary conditions (pressure and flow) and the same sample conditioning procedures should be used.

[1]  M. Romer,et al.  Effect of moisture and concrete composition on the torrent permeability measurement , 2005 .

[2]  Michael Golias,et al.  Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures , 2011 .

[3]  Nick R. Buenfeld,et al.  Estimating transport properties of mortars using image analysis on backscattered electron images , 2006 .

[4]  D. Bentz,et al.  Effect of sample conditioning on the water absorption of concrete , 2011 .

[5]  F. R. Montgomery,et al.  ‘CLAM’ tests for measuring in-situ permeation properties of concrete , 1995 .

[6]  H. Hilsdorf,et al.  Performance Criteria for concrete Durability , 1995 .

[7]  R. E. Cunningham,et al.  Diffusion in Gases and Porous Media , 1980 .

[8]  R. Torrent,et al.  A two-chamber vacuum cell for measuring the coefficient of permeability to air of the concrete cover on site , 1992 .

[9]  Yunping Xi,et al.  Moisture diffusion in cementitious materials Moisture capacity and diffusivity , 1994 .

[10]  Hamlin M. Jennings,et al.  A model for the microstructure of calcium silicate hydrate in cement paste , 2000 .

[11]  J. Sercombe,et al.  Experimental Study of Gas Diffusion in Cement Paste , 2007 .

[12]  Y. Ballim.  Curing and the durability of OPC, fly ash and blast-furnace slag concretes , 1993 .

[13]  Mark Alexander,et al.  Durability performance of concrete containing condensed silica fume , 1999 .

[14]  C. Hall,et al.  Barrier performance of concrete: A review of fluid transport theory , 1994 .

[15]  Mark Alexander,et al.  Assessing the repeatability and reproducibility values of South African durability index tests : technical paper , 2006 .

[16]  M. Setzer,et al.  The statistical thickness and the chemical potential of adsorbed water films , 1981 .

[17]  U. Ludwig,et al.  Determination of permeable porosity , 1973 .

[18]  Chiara Villani,et al.  Transport processes in partially saturate concrete: Testing and liquid properties , 2014 .

[19]  U. Ludwig,et al.  Measuring gas diffusion for the valuation of open porosity on mortars and concretes , 1969 .

[20]  N. Buenfeld,et al.  Influence of the interfacial transition zone and microcracking on the diffusivity, permeability and sorptivity of cement-based materials after drying , 2009 .

[21]  Y. F. Houst,et al.  Influence of porosity and water content on the diffusivity of CO2 and O2 through hydrated cement paste , 1994 .

[22]  J. J. Kollek.  The determination of the permeability of concrete to oxygen by the Cembureau method—a recommendation , 1989 .

[23]  M. Carcasses,et al.  Gas permeability of concrete in relation to its degree of saturation , 1999 .

[24]  An optimised preconditioning procedure for gas permeability measurement , 2002 .

[25]  Stephen Brunauer,et al.  Pore structure analysis by water vapor adsorption: I. t-Curves for water vapor , 1969 .

[26]  V. Baroghel-Bouny.  Water Vapour Sorption Experiments on Hardened Cementitious Materials: Part I: Essential Tool for Analysis of Hygral Behaviour and its Relation to Pore Structure , 2007 .

[27]  Gaurav Sant,et al.  Interactions between shrinkage reducing admixtures (SRA) and cement paste's pore solution , 2008 .

[28]  P B Bamforth,et al.  The relationship between permeability coefficients for concrete obtained using liquid and gas , 1987 .

[29]  Hans W. Reinhardt,et al.  Permeability and diffusivity of concrete as function of temperature , 2002 .

[30]  D. W. Pollock,et al.  Gas transport in unsaturated zones: Multicomponent systems and the adequacy of Fick's laws , 1989 .

[31]  Nataliya Hearn,et al.  Self-sealing, autogenous healing and continued hydration: What is the difference? , 1998 .

[32]  E. Garboczi,et al.  Length scales relating the fluid permeability and electrical conductivity in random two-dimensional model porous media. , 1992, Physical review. B, Condensed matter.