Serpentine square wave microchannel fabrication with WEDM and soft lithography

[1]  Sukumar Pati,et al.  Comparative assessment of mixing characteristics and pressure drop in spiral and serpentine micromixers , 2021 .

[2]  Sukumar Pati,et al.  Numerical study of the vortex‐induced electroosmotic mixing of non‐Newtonian biofluids in a nonuniformly charged wavy microchannel: Effect of finite ion size , 2021, Electrophoresis.

[3]  T. Debnath,et al.  Concept development for fabricating threaded micro-pin using wire-EDM , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[4]  Sukumar Pati,et al.  Analysis of mixing performances in microchannel with obstacles of different aspect ratios , 2019, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

[5]  Sukumar Pati,et al.  Numerical study of mixing in wavy micromixers: comparison between raccoon and serpentine mixer , 2019, Chemical Engineering and Processing - Process Intensification.

[6]  T. Debnath,et al.  Fabrication of an array of micro-fins using Wire-EDM and its parametric analysis , 2019, Materials and Manufacturing Processes.

[7]  Bin Fei,et al.  Fabrication of 3D PDMS Microchannels of Adjustable Cross-Sections via Versatile Gel Templates , 2019, Polymers.

[8]  D. Kamble,et al.  Optimization of photochemical machining process parameters for manufacturing microfluidic channel , 2018, Materials and Manufacturing Processes.

[9]  P. K. Patowari,et al.  Fabrication of serpentine micro-channels on glass by ultrasonic machining using developed micro-tool by wire-cut electric discharge machining , 2018 .

[10]  R. Misra,et al.  Numerical and experimental investigations on the performance of a serpentine microchannel with semicircular obstacles , 2018 .

[11]  Y. Shin,et al.  Effective methods for fabricating trapezoidal shape microchannel of arbitrary dimensions on polymethyl methacrylate (PMMA) substrate by a CO2 laser , 2017 .

[12]  Robert J. Wood,et al.  Comparative analysis of fabrication methods for achieving rounded microchannels in PDMS , 2016 .

[13]  S. Verma,et al.  Fabrication of square microchannel for experimental investigation of two phase flow using conventional machining process , 2016 .

[14]  Graça Minas,et al.  Biomedical microfluidic devices by using low-cost fabrication techniques: A review. , 2016, Journal of biomechanics.

[15]  Xueye Chen,et al.  Numerical and experimental investigation on micromixers with serpentine microchannels , 2016 .

[16]  S. Prakash,et al.  Fabrication of microchannels: A review , 2015 .

[17]  Sumit Joshi,et al.  Ultra-low-cost ‘paper-and-pencil’ device for electrically controlled micromixing of analytes , 2015 .

[18]  Diana Pinho,et al.  A Rapid and Low-Cost Nonlithographic Method to Fabricate Biomedical Microdevices for Blood Flow Analysis , 2014, Micromachines.

[19]  Shou-Shing Hsieh,et al.  Mixing efficiency of Y-type micromixers with different angles , 2013 .

[20]  Xi Li,et al.  Numerical and experimental investigation of mixing characteristics in the constructal tree-shaped microchannel , 2013 .

[21]  Peng Li,et al.  Design and test of a passive planar labyrinth micromixer for rapid fluid mixing , 2012 .

[22]  Jing-Tang Yang,et al.  Chaotic mixing of fluids in a planar serpentine channel , 2007 .

[23]  M. Ward,et al.  Micro T-mixer as a rapid mixing micromixer , 2004 .

[24]  Sukumar Pati,et al.  Fabrication of wavy micromixer using soft lithography technique , 2020 .

[25]  Sukumar Pati,et al.  Numerical Analysis of Mixing Performance in Microchannel with Different Ratio of Outlet to Inlet Width , 2019, Techno-Societal 2018.

[26]  Sukumar Pati,et al.  Influence of Confluence Angle Between Inlets on the Mixing Performance of Micro-mixer with Obstacles , 2019, Techno-Societal 2018.

[27]  Ju-Nan Kuo,et al.  Design optimization of micromixer with square-wave microchannel on compact disk microfluidic platform , 2014 .

[28]  P. K. Patowari,et al.  Process Parameter Optimization of Wire EDM on Aluminum and Mild Steel by Using Taguchi Method , 2014 .