SEISMIC BEHAVIOUR OF A R/C WALL: NUMERICAL SIMULATION AND EXPERIMENTAL VALIDATION

This paper describes the numerical simulation of the seismic behaviour of a mock-up of a six-floor building, constituted by two parallel R/C walls and experimentally tested on a shaking table. Within the scope of an international benchmark the mock-up was submitted to three earthquakes with intensities up to 0.71 g, which induced nonlinear behaviour in the concrete and reinforcement. For the numerical simulations concrete is discretised with 2D finite elements, and its behaviour reproduced via a constitutive model with two scalar damage variables. Steel rebars are discretised with 2-noded truss elements, and their constitutive behaviour under cyclic conditions reproduced by the Menegottb-Pinto model. Specific attention is devoted to Rayleigh damping, focusing on two different strategies: (i) disregarding the damping contribution, or (ii) adopting a damping matrix that takes into account the stiffness changes during the nonlinear analyses. Main results and strategies for simulating the benchmark axe presented, with emphasis on the comparison between the numerical and the experimental results, which show good agreement when the damping contribution is neglected.