Eliminating DC Current Injection in Current-Transformer-Sensed STATCOMs

Grid-connected power electronics converters/inverters usually have certain amount of dc component at their ac terminal. They are likely to inject unwanted direct current into the power grid, unless a line-frequency transformer is employed. This study investigates this dc injection problem for static synchronous compensator (STATCOM) and connects the dc injection with current transformer (CT), a current sensing element widely used in high-voltage converters. By introducing CT's model into the STATCOM's model, this study found that using CT for current feedback control can cause large dc injection, if no extra means is taken. Expressions of the dc injection for different controllers were derived. Then, a dc injection elimination method was proposed. This method eliminates the dc component of the output current by building an indirect dc feedback loop; therefore, it can prevent injecting the direct current even when it cannot be sensed. Experimental results taken on a 25-level cascaded multilevel STATCOM prototype verifies the analysis and the proposed method.

[1]  H. Akagi,et al.  Control and Performance of a Transformerless Cascade PWM STATCOM With Star Configuration , 2007, IEEE Transactions on Industry Applications.

[2]  A. Cataliotti,et al.  Frequency response of Measurement Current Transformers , 2008, 2008 IEEE Instrumentation and Measurement Technology Conference.

[3]  David J. Atkinson,et al.  Approach to low-cost prevention of DC injection in transformerless grid connected inverters , 2010 .

[4]  Wenhua Liu,et al.  Control of a Cascade STATCOM With Star Configuration Under Unbalanced Conditions , 2009 .

[5]  H. Akagi,et al.  Active-Power Control of Individual Converter Cells for a Battery Energy Storage System Based on a Multilevel Cascade PWM Converter , 2012, IEEE Transactions on Power Electronics.

[6]  A. Ahfock,et al.  Direct current offset controller for transformerless single-phase photovoltaic grid-connected inverters , 2010 .

[7]  A. Ahfock,et al.  DC magnetisation of transformers , 2006 .

[8]  M K Sahu,et al.  Transformerless Hybrid Topology for Medium-Voltage Reactive-Power Compensation , 2011, IEEE Transactions on Power Electronics.

[9]  M. Omizo,et al.  Modeling , 1983, Encyclopedic Dictionary of Archaeology.

[10]  Qiang Song,et al.  Control of a Cascade STATCOM With Star Configuration Under Unbalanced Conditions , 2009, IEEE Transactions on Power Electronics.

[11]  Marian K. Kazimierczuk,et al.  Bandwidth of Current Transformers , 2009, IEEE Transactions on Instrumentation and Measurement.

[12]  Fang Zheng Peng,et al.  A multilevel voltage-source inverter with separate DC sources for static VAr generation , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[13]  H. P. Mohammadi,et al.  A Transformerless Medium-Voltage STATCOM Topology Based on Extended Modular Multilevel Converters , 2011, IEEE Transactions on Power Electronics.

[14]  Shaojun Xie,et al.  Transformerless split-inductor neutral point clamped three-level PV grid-connected inverter , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[15]  Jih-Sheng Lai,et al.  Modeling, analysis and control of cascaded-multilevel converter-based STATCOM , 2003, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).

[16]  Yunjie Gu,et al.  Improved Transformerless Inverter With Common-Mode Leakage Current Elimination for a Photovoltaic Grid-Connected Power System , 2012, IEEE Transactions on Power Electronics.

[17]  Guo Xiaoqiang,et al.  DC injection control for grid-connected inverters based on virtual capacitor concept , 2008, 2008 International Conference on Electrical Machines and Systems.

[18]  Hirofumi Akagi,et al.  A 6.6-kV transformerless STATCOM based on a five-level diode-clamped PWM converter: system design and experimentation of a 200-V, 10-kVA laboratory model , 2005 .

[19]  Ronald Sharma.  Removal of DC offset current from transformerless PV inverters connected to utility , 2005 .

[20]  M. Takasaki,et al.  A Transformerless D-STATCOM Based on a Multivoltage Cascade Converter Requiring No DC Sources , 2012, IEEE Transactions on Power Electronics.

[21]  C.M. Johnson,et al.  Auto-Calibrating DC Link Current Sensing Technique for Transformerless, Grid Connected, H-Bridge Inverter Systems , 2006, IEEE Transactions on Power Electronics.

[22]  Alex Q. Huang,et al.  Coupling Effect Reduction of a Voltage-Balancing Controller in Single-Phase Cascaded Multilevel Converters , 2012, IEEE Transactions on Power Electronics.

[23]  Yong Kang,et al.  A Novel DC Capacitor Voltage Balance Control Method for Cascade Multilevel STATCOM , 2012, IEEE Transactions on Power Electronics.

[24]  Donald Grahame Holmes,et al.  Stationary frame current regulation of PWM inverters with zero steady state error , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[25]  P. Karlsson,et al.  On DC injection to AC grids from distributed generation , 2005, 2005 European Conference on Power Electronics and Applications.

[26]  Roberto González,et al.  Transformerless Single-Phase Multilevel-Based Photovoltaic Inverter , 2008, IEEE Transactions on Industrial Electronics.