A review on structuralized current collectors for high-performance lithium-ion battery anodes
暂无分享,去创建一个
Yao Huang | Yong Tang | Yang Yang | Qiu Zhiqiang | Wei Yuan | Xiaoqing Zhang | Luo Jian | Yuzhi Ke | Wang Chun | Yuhang Yuan | Yong Tang | W. Yuan | Yao Huang | Yang Yang | Yuhang Yuan | Xiaoqing Zhang | Yuzhi Ke | Qiu Zhiqiang | Luo Jian | Wang Chun
[1] Lip Huat Saw,et al. Overview of porous media/metal foam application in fuel cells and solar power systems , 2018, Renewable and Sustainable Energy Reviews.
[2] H. A. Bastawrous,et al. Accurate approach to the temperature effect on state of charge estimation in the LiFePO4 battery under dynamic load operation , 2017 .
[3] Wei Wang,et al. Rationally designed hollow precursor-derived Zn3V2O8 nanocages as a high-performance anode material for lithium-ion batteries , 2017 .
[4] Yang Li,et al. Fe2O3 Nanoneedles on Ultrafine Nickel Nanotube Arrays as Efficient Anode for High‐Performance Asymmetric Supercapacitors , 2017 .
[5] Yujun Fu,et al. One-step combustion synthesis to prepare MnNi 3 O 4 /Ni nanofoams composites for lithium ion battery anode , 2018, Journal of Alloys and Compounds.
[6] Yan Tang,et al. Encapsulation of CoSx Nanocrystals into N/S Co‐Doped Honeycomb‐Like 3D Porous Carbon for High‐Performance Lithium Storage , 2018, Advanced science.
[7] Yong Tang,et al. A binder-free composite anode composed of CuO nanosheets and multi-wall carbon nanotubes for high-performance lithium-ion batteries , 2018 .
[8] Wei Lv,et al. Realizing stable lithium deposition by in situ grown Cu2S nanowires inside commercial Cu foam for lithium metal anodes , 2019, Journal of Materials Chemistry A.
[9] Wei Yuan,et al. Porous metal materials for polymer electrolyte membrane fuel cells – A review , 2012 .
[10] Jianqiu Li,et al. Impact of high-power charging on the durability and safety of lithium batteries used in long-range battery electric vehicles , 2019 .
[11] Qiang Zhang,et al. Review of nanostructured current collectors in lithium–sulfur batteries , 2017, Nano Research.
[12] Rui Xiong,et al. Characterization of external short circuit faults in electric vehicle Li-ion battery packs and prediction using artificial neural networks , 2020 .
[13] Zhaoyang Li,et al. CTAB-assisted growth of self-supported Zn2GeO4 nanosheet network on a conductive foam as a binder-free electrode for long-life lithium-ion batteries. , 2018, Nanoscale.
[14] Doron Aurbach,et al. Promise and reality of post-lithium-ion batteries with high energy densities , 2016 .
[15] Ping Nie,et al. Effect of Graphene Modified Cu Current Collector on the Performance of Li4Ti5O12 Anode for Lithium-Ion Batteries. , 2016, ACS applied materials & interfaces.
[16] Huolin L. Xin,et al. Three-dimensional hollow-structured binary oxide particles as an advanced anode material for high-rate and long cycle life lithium-ion batteries , 2016 .
[17] Christopher L. Magee,et al. Technological development of key domains in electric vehicles: Improvement rates, technology trajectories and key assignees , 2020 .
[18] Yating Ma,et al. Self-assembly synthesis of 3D graphene-encapsulated hierarchical Fe 3 O 4 nano-flower architecture with high lithium storage capacity and excellent rate capability , 2017 .
[19] Kai Sundmacher,et al. Exergetic assessment of CO2 methanation processes for the chemical storage of renewable energies , 2019, Applied Energy.
[20] Song Jin,et al. NS codoped carbon nanorods as anode materials for high-performance lithium and sodium ion batteries , 2018 .
[21] R. Kataoka,et al. High-strength clad current collector for silicon-based negative electrode in lithium ion battery , 2016 .
[22] Xueao Jiang,et al. Corrosion Protection of Copper Current Collector Of Lithium- Ion Batteries by Doped Polypyrrole Coatings , 2020, International Journal of Electrochemical Science.
[23] Yue-Peng Cai,et al. An efficient multidoped Cu0.39Zn0.14Co2.47O4-ZnO electrode attached on reduced graphene oxide and copper foam as superior lithium-ion battery anodes , 2018 .
[24] Zeheng Li,et al. An innovation: Dendrite free quinone paired with ZnMn2O4 for zinc ion storage , 2019, Materials Today Energy.
[25] Chao Li,et al. First-Principles Study on the Adsorption and Dissociation of Impurities on Copper Current Collector in Electrolyte for Lithium-Ion Batteries , 2018, Materials.
[26] Stefano Passerini,et al. Single‐Ion Conducting Electrolyte Based on Electrospun Nanofibers for High‐Performance Lithium Batteries , 2019, Advanced Energy Materials.
[27] Tao Huang,et al. Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors , 2017 .
[28] Jin Ge,et al. Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance. , 2016, Nano letters.
[29] Guoxiu Wang,et al. 3D Metal Carbide@Mesoporous Carbon Hybrid Architecture as a New Polysulfide Reservoir for Lithium‐Sulfur Batteries , 2016 .
[30] Taihong Wang,et al. The direct growth of ZnCo 2 O 4 on conducting substrates may be a solution for further improving the performance of ZnCo , 2013 .
[31] Martha Schreiber,et al. Current Collectors for Positive Electrodes of Lithium-Based Batteries , 2005 .
[32] Kai Chen,et al. A biomass based free radical scavenger binder endowing a compatible cathode interface for 5 V lithium-ion batteries , 2019, Energy & Environmental Science.
[33] Young Il Song,et al. Few-layer graphene coated current collectors for safe and powerful lithium ion batteries , 2019, Carbon.
[34] Siyuan Yang,et al. Simultaneous Encapsulation of Nano-Si in Redox Assembled rGO Film as Binder-Free Anode for Flexible/Bendable Lithium-Ion Batteries. , 2019, ACS applied materials & interfaces.
[35] Jonghyun Park,et al. A Single Particle Model with Chemical/Mechanical Degradation Physics for Lithium Ion Battery State of Health (SOH) Estimation , 2018 .
[36] Chaoyang Wang,et al. Electrochemical Energy : Advanced Materials and Technologies , 2015 .
[37] Wei Yuan,et al. Honeycomb‐Inspired Surface‐Patterned Cu@CuO Composite Current Collector for Lithium‐Ion Batteries , 2019, Energy Technology.
[38] Ya‐Xia Yin,et al. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes , 2015, Nature Communications.
[39] James R McDonough,et al. Si nanoparticle-decorated Si nanowire networks for Li-ion battery anodes. , 2011, Chemical communications.
[40] Denis Y. W. Yu,et al. 3 V Cu–Al Rechargeable Battery Enabled by Highly Concentrated Aprotic Electrolyte , 2019, ACS Applied Energy Materials.
[41] Y. Nishi. Lithium ion secondary batteries; past 10 years and the future , 2001 .
[42] Oliver Sawodny,et al. Lifetime optimized charging strategy of Li-ion cells based on daily driving cycle of electric two-wheelers , 2019, Applied Energy.
[43] Yu-Guo Guo,et al. Low volume change composite lithium metal anodes , 2019, Nano Energy.
[44] P. Zhai,et al. Net energy benefits of carbon nanotube applications , 2016 .
[45] Tengfei Zhou,et al. Ultra-light and flexible pencil-trace anode for high performance potassium-ion and lithium-ion batteries , 2017 .
[46] Akihiko Hirata,et al. A nanoporous metal recuperated MnO2 anode for lithium ion batteries. , 2015, Nanoscale.
[47] Min Li,et al. Effect of different dimensional carbon materials on the properties and application of phase change materials: A review , 2019, Applied Energy.
[48] Heng Liu,et al. A flexible 3D nitrogen-doped carbon foam@CNTs hybrid hosting TiO2 nanoparticles as free-standing electrode for ultra-long cycling lithium-ion batteries , 2018 .
[49] Nikolaos G. Paterakis,et al. Implementation of large-scale Li-ion battery energy storage systems within the EMEA region , 2020 .
[50] Wei Yuan,et al. A review on silicon nanowire-based anodes for next-generation high-performance lithium-ion batteries from a material-based perspective , 2020 .
[51] Meng Li,et al. Deep convolutional neural networks with ensemble learning and transfer learning for capacity estimation of lithium-ion batteries , 2020 .
[52] Shengyi Li,et al. Electrochemical stability of aluminum current collector in aqueous rechargeable lithium-ion battery electrolytes , 2017, Journal of Applied Electrochemistry.
[53] Luo Jian,et al. High-performance CuO/Cu composite current collectors with array-pattern porous structures for lithium-ion batteries , 2017 .
[54] Lufeng Yang,et al. A novel 3D bimodal porous current collector with large interconnected spherical channels for improved capacity and cycling stability of Sn anode in Li-ion batteries , 2018 .
[55] Weimin Zhang,et al. Improve the Overall Performances of Lithium Ion Batteries by a Facile Method of Modifying the Surface of Cu Current Collector with Carbon , 2015 .
[56] G. Hinds,et al. In situ monitoring of lithium-ion battery degradation using an electrochemical model , 2019, Applied Energy.
[57] Xiuli Wang,et al. Smart Construction of Integrated CNTs/Li4Ti5O12 Core/Shell Arrays with Superior High‐Rate Performance for Application in Lithium‐Ion Batteries , 2018, Advanced science.
[58] Dan Xu,et al. Dendritic Ni‐P‐Coated Melamine Foam for a Lightweight, Low‐Cost, and Amphipathic Three‐Dimensional Current Collector for Binder‐Free Electrodes , 2014, Advanced materials.
[59] Yung-Eun Sung,et al. Hierarchical micro-lamella-structured 3D porous copper current collector coated with tin for advanced lithium-ion batteries , 2017 .
[60] Hsing-Yu Tuan,et al. High-performance lithium-ion batteries with 1.5 μm thin copper nanowire foil as a current collector , 2017 .
[61] Yang-Kook Sun,et al. Electrochemical behavior and passivation of current collectors in lithium-ion batteries , 2011 .
[62] Hantao Liu,et al. Vacuum‐Dried 3D Holey Graphene Frameworks Enabling High Mass Loading and Fast Charge Transfer for Advanced Batteries , 2020, Energy Technology.
[63] Zhongwei Chen,et al. 3D Nanowire Arrayed Cu Current Collector toward Homogeneous Alloying Anode Deposition for Enhanced Sodium Storage , 2019, Advanced Energy Materials.
[64] Joeri Van Mierlo,et al. Concept of reliability and safety assessment of lithium-ion batteries in electric vehicles: Basics, progress, and challenges , 2019, Applied Energy.
[65] Yong Lei,et al. Rationally Engineered Electrodes for a High‐Performance Solid‐State Cable‐Type Supercapacitor , 2017 .
[66] Fredrik Lindgren,et al. Lithium trapping in alloy forming electrodes and current collectors for lithium based batteries , 2017 .
[67] Hong-Ping Lin,et al. Carbon fibers as three-dimensional current collectors for silicon/reduced graphene oxide lithium ion battery anodes with improved rate performance and cycle life , 2018 .
[68] Hangxun Xu,et al. Nitrogen-Doped Hollow Carbon Nanospheres for High-Performance Li-Ion Batteries. , 2017, ACS applied materials & interfaces.
[69] S. Lanceros-Méndez,et al. Mesoporous poly(vinylidene fluoride-co-trifluoroethylene) membranes for lithium-ion battery separators , 2019, Electrochimica Acta.
[70] Hyun-Jung Choi,et al. Simple solution-based synthesis of pyridinic-rich nitrogen-doped graphene nanoplatelets for supercapacitors , 2017 .
[71] Yang Gao,et al. Accelerated fading recognition for lithium-ion batteries with Nickel-Cobalt-Manganese cathode using quantile regression method , 2019 .
[72] Ning Du,et al. Synthesis of nanoporous three-dimensional current collector for high-performance lithium-ion batteries , 2013 .
[73] Simon V. Erhard,et al. State estimation of lithium-ion cells using a physicochemical model based extended Kalman filter , 2018, Applied Energy.
[74] Wenhua H. Zhu,et al. Graphene nested porous carbon current collector for lithium metal anode with ultrahigh areal capacity , 2018, Energy Storage Materials.
[75] Wei Yuan,et al. From Checkerboard‐Like Sand Barriers to 3D Cu@CNF Composite Current Collectors for High‐Performance Batteries , 2018, Advanced science.
[76] Zhijian Peng,et al. Vertically standing ultrathin MoS2 nanosheet arrays on molybdenum foil as binder-free anode for lithium-ion batteries , 2018, Journal of Materials Science.
[77] Yan Yu,et al. Advanced 3D Current Collectors for Lithium‐Based Batteries , 2018, Advanced materials.
[78] Fei Zhao,et al. Super‐Aligned Carbon Nanotube Films as Current Collectors for Lightweight and Flexible Lithium Ion Batteries , 2013 .
[79] Ping Shen,et al. 3D highly oriented metal foam: a competitive self-supporting anode for high-performance lithium-ion batteries , 2020, Journal of Materials Science.
[80] Lianzhou Wang,et al. Characterisation of lithium-ion battery anodes fabricated via in-situ Cu6Sn5 growth on a copper current collector , 2019, Journal of Power Sources.
[81] Shuai Bai,et al. Interfacial modification of a lightweight carbon foam current collector for high-energy density Si/LCO lithium-ion batteries , 2017 .
[82] Zhenxing Yin,et al. Copper nanowire/multi-walled carbon nanotube composites as all-nanowire flexible electrode for fast-charging/discharging lithium-ion battery , 2018, Nano Research.
[83] Jian Jiang,et al. Copper nanowall array grown on bulk Fe–Co–Ni alloy substrate at room temperature as lithium-ion battery current collector , 2010 .
[84] Li-Jun Wan,et al. Cu‐Si Nanocable Arrays as High‐Rate Anode Materials for Lithium‐Ion Batteries , 2011, Advanced materials.
[85] Yang Liu,et al. The effect of passivation film in preparation 3D structural carbon paper/tin oxide@carbon as freestanding anode for lithium-ion batteries , 2018 .
[86] Wei Yuan,et al. Silicon-nanoparticle-based composites for advanced lithium-ion battery anodes. , 2020, Nanoscale.
[87] Yi Mei,et al. Facile preparation of flexible eicosane/SWCNTs phase change films via colloid aggregation for thermal energy storage , 2020 .
[88] Mark N. Obrovac,et al. Selecting inactive materials with low electrolyte reactivity for lithium-ion cells , 2018, Journal of Power Sources.
[89] Hong Liang,et al. 3D Current Collectors for Lithium-Ion Batteries: A Topical Review , 2018, Small Methods.
[90] Jie Lv,et al. Performance of LiFePO4 batteries in parallel based on connection topology , 2019, Applied Energy.
[91] Jun Jin,et al. In Situ Conversion of Cu3P Nanowires to Mixed Ion/Electron‐Conducting Skeleton for Homogeneous Lithium Deposition , 2019, Advanced Energy Materials.
[92] Philipp Adelhelm,et al. Sodium-Storage Behavior of Exfoliated MoS2 as an Electrode Material for Solid-State Batteries with Na3PS4 as the Solid Electrolyte , 2020 .
[93] Cheng-Yu Wu,et al. Silicon thin film anodes coated on micron carbon-fiber current collectors for lithium ion batteries , 2015 .
[94] Ang Li,et al. Core-sheath structural carbon materials for integrated enhancement of thermal conductivity and capacity , 2018 .
[95] Ke Wang,et al. PVD synthesis of binder-free silicon and carbon coated 3D α-Fe2O3 nanorods hybrid films as high-capacity and long-life anode for flexible lithium-ion batteries , 2018, Energy.
[96] Zongping Shao,et al. Adsorption-based synthesis of Co3O4/C composite anode for high performance lithium-ion batteries , 2017 .
[97] Kai Xu,et al. A novel silsesquioxanes modified electrospun composite fibrous separator by in-situ crosslinking method for lithium-ion batteries , 2019, Materials Letters.
[98] Guangzhao Zhang,et al. Glycinamide modified polyacrylic acid as high-performance binder for silicon anodes in lithium-ion batteries , 2018, Journal of Power Sources.
[99] Joris de Hoog,et al. Combined cycling and calendar capacity fade modeling of a Nickel-Manganese-Cobalt Oxide Cell with real-life profile validation , 2017 .
[100] Jiuchun Jiang,et al. An optimal internal-heating strategy for lithium-ion batteries at low temperature considering both heating time and lifetime reduction , 2019 .
[101] Debasish Mohanty,et al. Identifying degradation mechanisms in lithium-ion batteries with coating defects at the cathode , 2018, Applied Energy.
[102] Abhisek Ukil,et al. Recent development of membrane for vanadium redox flow battery applications: A review , 2019, Applied Energy.
[103] Yong Tang,et al. Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries , 2020 .
[104] Domenico Frattini,et al. Improved biofilm adhesion and electrochemical properties of a graphite-cement composite with silica nanoflowers versus two benchmark carbon felts , 2020 .
[105] Jinho Yang,et al. Induced nanoscale roughness of current collectors enhances lithium ion battery performances , 2019, Journal of Power Sources.
[106] Yan Yan,et al. Facile synthesis of hierarchical CNF/SnO2/Ni nanostructures via self-assembly process as anode materials for lithium ion batteries , 2018, Royal Society Open Science.
[107] Yadong Li,et al. Super-aligned carbon nanotube films with a thin metal coating as highly conductive and ultralight current collectors for lithium-ion batteries , 2017 .
[108] Wei Zhang,et al. Vertical graphene nanowalls coating of copper current collector for enhancing rate performance of graphite anode of Li ion battery: The merit of optimized interface architecture , 2018 .
[109] Anping Zhao,et al. Size Reduction of Self-Isolated MIMO Antenna System for 5G Mobile Phone Applications , 2019, IEEE Antennas and Wireless Propagation Letters.
[110] Daniel J. Noelle,et al. Improved safety and mechanical characterizations of thick lithium-ion battery electrodes structured with porous metal current collectors , 2018, Journal of Power Sources.
[111] Huajun Feng,et al. Electrochemical Performance of a Lithium Ion Battery with Different Nanoporous Current Collectors , 2019, Batteries.
[112] Zhiyang Yu,et al. Hierarchical Li 4 Ti 5 O 12 nanosheet arrays anchoring on carbon fiber cloth as ultra-stable free-standing anode of Li-ion battery , 2018 .
[113] Wei Yuan,et al. Three-dimensional porous composite framework assembled with CuO microspheres as anode current collector for lithium-ion batteries , 2018, Science China Technological Sciences.
[114] Bin Wang,et al. Micro/nanostructured MnCo2O4.5 anodes with high reversible capacity and excellent rate capability for next generation lithium-ion batteries , 2019, Applied Energy.