Does Taper Size Have an Effect on Taper Damage in Retrieved Metal-on-Polyethylene Total Hip Devices?

[1]  S. Kurtz,et al.  Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion , 2016, Clinical orthopaedics and related research.

[2]  S. Kurtz,et al.  Microgrooved Surface Topography Does Not Influence Fretting Corrosion of Tapers in Total Hip Arthroplasty: Classification and Retrieval Analysis , 2015 .

[3]  M. Teeter,et al.  Effect of Taper Design on Trunnionosis in Metal on Polyethylene Total Hip Arthroplasty. , 2015, The Journal of arthroplasty.

[4]  J. Jacobs,et al.  Modern Trunnions Are More Flexible: A Mechanical Analysis of THA Taper Designs , 2014, Clinical orthopaedics and related research.

[5]  T. Wright,et al.  What is the Trouble With Trunnions? , 2014, Clinical orthopaedics and related research.

[6]  T. Wright,et al.  Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements , 2014, Clinical orthopaedics and related research.

[7]  J. Hua,et al.  Enhanced wear and corrosion in modular tapers in total hip replacement is associated with the contact area and surface topography , 2013, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[8]  S. Kurtz,et al.  Is increased modularity associated with increased fretting and corrosion damage in metal-on-metal total hip arthroplasty devices?: a retrieval study. , 2013, The Journal of arthroplasty.

[9]  M. Morlock,et al.  Wear patterns of taper connections in retrieved large diameter metal‐on‐metal bearings , 2013, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[10]  S. Kurtz,et al.  Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study , 2013, Clinical orthopaedics and related research.

[11]  Christoph H. Lohmann,et al.  Corrosion at the Cone/Taper Interface Leads to Failure of Large-diameter Metal-on-metal Total Hip Arthroplasties , 2012, Clinical orthopaedics and related research.

[12]  T. J. Joyce,et al.  Taper junction failure in large-diameter metal-on-metal bearings , 2012, Bone & joint research.

[13]  Philippa Cann,et al.  Edge loading in metal-on-metal hips: low clearance is a new risk factor , 2012, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[14]  J. Gilbert,et al.  In vitro corrosion testing of modular hip tapers. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

[15]  Sue Leurgans,et al.  A Multicenter Retrieval Study of the Taper Interfaces of Modular Hip Prostheses , 2002, Clinical orthopaedics and related research.

[16]  C. Rimnac,et al.  An analysis of the head-neck taper interface in retrieved hip prostheses. , 1994, Clinical orthopaedics and related research.

[17]  J L Gilbert,et al.  In vivo corrosion of modular hip prosthesis components in mixed and similar metal combinations. The effect of crevice, stress, motion, and alloy coupling. , 1993, Journal of biomedical materials research.

[18]  J. Gilbert,et al.  Fretting crevice corrosion of stainless steel stem-CoCr femoral head connections: comparisons of materials, initial moisture, and offset length. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[19]  M. D'Onofrio,et al.  Effects of Neck Extension, Coverage, and Frequency on The Fretting Corrosion Of Modular THR Bore and Cone Interface , 1997 .