Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects

The rapidly increasing device densities in electronics dictate the need for efficient thermal management. If successfully exploited, graphene, which possesses extraordinary thermal properties, can be commercially utilized in polymer composites with ultrahigh thermal conductivity (TC). The total potential of graphene to enhance TC, however, is restricted by the large interfacial thermal resistance between the polymer mediated graphene boundaries. We report a facile and scalable dispersion of commercially available graphene nanoplatelets (GnPs) in a polymer matrix, which formed composite with an ultrahigh TC of 12.4 W/m K (vs 0.2 W/m K for neat polymer). This ultrahigh TC was achieved by applying high compression forces during the dispersion that resulted in the closure of gaps between adjacent GnPs with large lateral dimensions and low defect densities. We also found strong evidence for the existence of a thermal percolation threshold. Finally, the addition of electrically insulating boron-nitride nanopart...

[1]  A. Chatterjee.  Percolation thresholds for polydisperse circular disks: a lattice-based exploration. , 2014, The Journal of chemical physics.

[2]  C. Xie,et al.  Study on the properties of the epoxy‐matrix composites filled with thermally conductive AlN and BN ceramic particles , 2010 .

[3]  B. Garnier,et al.  Thermal properties and percolation in carbon nanotube-polymer composites , 2007 .

[4]  L. Drzal,et al.  Thermal conductivity of exfoliated graphite nanoplatelet paper , 2011 .

[5]  Y. Jaluria,et al.  Flame synthesis of graphene films in open environments , 2011, 1111.4699.

[6]  C. Tzoganakis,et al.  High yield production and purification of few layer graphene by Gum Arabic assisted physical sonication , 2013, Scientific Reports.

[7]  H. Nan,et al.  The thermal stability of graphene in air investigated by Raman spectroscopy , 2013 .

[8]  H. Tien,et al.  Effect of functionalized carbon nanotubes on the thermal conductivity of epoxy composites , 2010 .

[9]  Jae Ik Lee,et al.  Enhanced thermal conductivity of polymer composites filled with hybrid filler , 2006 .

[10]  Micah J. Green,et al.  Dispersions of non-covalently functionalized graphene with minimal stabilizer. , 2012, ACS nano.

[11]  Li Shi,et al.  Thermal conductivity and phonon transport in suspended few-layer hexagonal boron nitride. , 2013, Nano letters.

[12]  Kyung-Wook Paik,et al.  Recent advances on anisotropic conductive adhesives (ACAs) for flat panel displays and semiconductor packaging applications , 2006 .

[13]  Yuanhua Lin,et al.  Interface effect on thermal conductivity of carbon nanotube composites , 2004 .

[14]  C. N. Lau,et al.  Superior thermal conductivity of single-layer graphene. , 2008, Nano letters.

[15]  L. Ye,et al.  Preparation, structure, and property of polyoxymethylene/carbon nanotubes thermal conducive composites , 2010 .

[16]  M. Gu,et al.  Enhanced thermal conductivity of epoxy nanocomposites filled with hybrid filler system of triethylenetetramine-functionalized multi-walled carbon nanotube/silane-modified nano-sized silicon carbide , 2010 .

[17]  P. Keblinski,et al.  On the lack of thermal percolation in carbon nanotube composites , 2005 .

[18]  L. Drzal,et al.  High thermally conductive graphite nanoplatelet/polyetherimide composite by precoating: Effect of percolation and particle size , 2013 .

[19]  R. Mülhaupt,et al.  Fracture toughness and failure mechanism of graphene based epoxy composites , 2014 .

[20]  H. Wagner,et al.  Fracture behavior of nanotube–polymer composites: Insights on surface roughness and failure mechanism , 2013 .

[21]  J. Zhong,et al.  A review of the influencing factors on anisotropic conductive adhesives joining technology in electrical applications , 2008 .

[22]  L. Drzal,et al.  Investigation of exfoliated graphite nanoplatelets (xGnP) in improving thermal conductivity of paraffin wax-based phase change material , 2011 .

[23]  Junya Kano,et al.  Effects of rotational direction and rotation-to-revolution speed ratio in planetary ball milling , 2002 .

[24]  F. Stavale,et al.  Quantifying defects in graphene via Raman spectroscopy at different excitation energies. , 2011, Nano letters.

[25]  C. Ma,et al.  Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites , 2011 .

[26]  M. Itkis,et al.  Graphite Nanoplatelet−Epoxy Composite Thermal Interface Materials , 2007 .

[27]  A. Buasri,et al.  Preparation and Characterization of Reduced Graphene Oxide Sheets via Water-Based Exfoliation and Reduction Methods , 2013 .

[28]  C. Ma,et al.  Synergetic effect of thermal conductive properties of epoxy composites containing functionalized multi-walled carbon nanotubes and aluminum nitride , 2012 .

[29]  Liyi Shi,et al.  Effect of Nanoparticles on the Performance of Thermally Conductive Epoxy Adhesives , 2010 .

[30]  F. Nüesch,et al.  Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites , 2012 .

[31]  G.E. Moore,et al.  Cramming More Components Onto Integrated Circuits , 1998, Proceedings of the IEEE.

[32]  J. Fischer,et al.  Single Wall Carbon Nanotube/Polyethylene Nanocomposites: Thermal and Electrical Conductivity , 2007 .

[33]  Lifeng Yan,et al.  Preparation of graphene by a low-temperature thermal reduction at atmosphere pressure. , 2010, Nanoscale.

[34]  S. Hsu,et al.  Enhanced thermal conductivity of polyimide films via a hybrid of micro- and nano-sized boron nitride. , 2010, The journal of physical chemistry. B.

[35]  Y. Candau,et al.  Electrical and thermophysical behaviour of PVC-MWCNT nanocomposites , 2008 .

[36]  R. Lovrinčić,et al.  Critical parameters in exfoliating graphite into graphene. , 2013, Physical chemistry chemical physics : PCCP.

[37]  Andre K. Geim,et al.  Electric Field Effect in Atomically Thin Carbon Films , 2004, Science.

[38]  Chen-Chi M. Ma,et al.  Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites , 2011 .

[39]  Alexander A. Balandin,et al.  Phonon thermal conduction in graphene: Role of Umklapp and edge roughness scattering , 2009 .

[40]  Chen-Chi M. Ma,et al.  Synergetic effect of hybrid boron nitride and multi-walled carbon nanotubes on the thermal conductivity of epoxy composites , 2011 .

[41]  A. Balandin,et al.  Graphene-multilayer graphene nanocomposites as highly efficient thermal interface materials. , 2012, Nano letters.

[42]  A. Tkatchenko,et al.  Scaling laws for van der Waals interactions in nanostructured materials , 2013, Nature Communications.

[43]  H. Liem,et al.  Enhanced thermal conductivity of boron nitride epoxy‐matrix composite through multi‐modal particle size mixing , 2007 .

[44]  P. van der Schoot,et al.  Connectivity percolation of polydisperse anisotropic nanofillers. , 2011, The Journal of chemical physics.

[45]  A. Fina,et al.  Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review , 2011 .

[46]  Qiuyu Zhang,et al.  Thermal percolation behavior of graphene nanoplatelets/polyphenylene sulfide thermal conductivity composites , 2014 .

[47]  Scott T. Huxtable,et al.  Interfacial heat flow in carbon nanotube suspensions , 2003, Nature materials.

[48]  V. Tilak,et al.  Combustion synthesis of graphene and ultracapacitor performance , 2013, Bulletin of Materials Science.

[49]  Jongmin Kim,et al.  The effects of functionalized graphene nanosheets on the thermal and mechanical properties of epoxy composites for anisotropic conductive adhesives (ACAs) , 2012, Microelectron. Reliab..

[50]  E. Pop,et al.  Thermal properties of graphene: Fundamentals and applications , 2012, 1301.6181.

[51]  B. Vogt,et al.  Electrically and thermally conductive nylon 6,6 , 1999 .