PAPER Special Section on Advanced Technologies in Antennas and Propagation in Conjunction with Main Topics of ISAP2009 Narrow-Wall-Connected Microstrip-to-Waveguide Transition Using V-Shaped Patch Element in Millimeter-Wave Band
暂无分享,去创建一个
SUMMARY Narrow-wall-connected microstrip-to-waveguide transition using V-shaped patch element in millimeter-wave band is proposed. Since the microstrip line on the narrow-wall is perpendicular to the E-plane of the waveguide, waveguide field does not couple directly to the microstrip line. The current on the V-shaped patch element flows along inclined edges, then current on the V-shaped patch element couples to the microstrip line efficiently. Three types of transitions are investigated. A numerical investigation of these transitions show some relations between bandwidth and insertion loss. It is confirmed that the improved transition exhibits an insertion loss of 0.6 dB from 76 to 77 GHz, and a bandwidth of 4.1% (3.15 GHz) for the reflection coefficient below −15 dB.
[1] W. Menzel,et al. Microstrip to waveguide transition compatible with MM-wave integrated circuits , 1994 .
[2] T. Q. Ho,et al. Spectral-domain analysis of E-plane waveguide to microstrip transitions , 1989 .
[3] S. Weinreb,et al. Full band waveguide-to-microstrip probe transitions , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).
[4] Kawthar A. Zaki,et al. Analysis and design of microstrip-to-waveguide transitions , 1994 .