Computational fluid dynamics modelling and validation of the temperature distribution in a forced convection oven

[1]  Josse De Baerdemaeker,et al.  Computational fluid dynamics modelling and validation of the isothermal airflow in a forced convection oven , 2000 .

[2]  Johan Claes,et al.  Model-based temperature control in ovens , 1999 .

[3]  C. R. Boon,et al.  Comparison of Predicted and Measured Air Flow Patterns in a Mechanically Ventilated Livestock Building without Animals , 1997 .

[4]  P. Verboven,et al.  Performance of different turbulence models for the calculation of the surface heat transfer coefficient , 1997 .

[5]  Josse De Baerdemaeker,et al.  The local surface heat transfer coefficient in thermal food process calculations: A CFD approach , 1997 .

[6]  K. Chang,et al.  Calculation of wall heat transfer in pipeexpansion turbulent flows , 1996 .

[7]  B. Nicolai,et al.  Sensitivity analysis with respect to the surface heat transfer coefficient as applied to thermal process calculations , 1996 .

[8]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[9]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[10]  Alain Kondjoyan,et al.  Effects of free stream turbulence intensity on heat and mass transfers at the surface of a circular cylinder and an elliptical cylinder, axis ratio 4 , 1995 .

[11]  Brian Launder,et al.  On the Computation of Convective Heat Transfer in Complex Turbulent Flows , 1988 .

[12]  Takashi Sato,et al.  Effect of free stream turbulence on flat plate heat transfer , 1988 .

[13]  H. Mark,et al.  Encyclopedia of polymer science and engineering , 1985 .

[14]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .