3D printed structures for delivery of biomolecules and cells: tissue repair and regeneration.

This paper reviews the current approaches to using 3D printed structures to deliver bioactive factors (e.g., cells and biomolecules) for tissue repair and regeneration. We discuss the benefits and critical points of potential scaffold materials and delivery strategies, particularly approaches that entail spatiotemporal variation in delivery. We also examine and critique advanced vascularization techniques, including delivery of angiogenesis factors and vascular cell sources. With further development of fabrication methods and functional materials, the 3D printed structures with embedded biomolecules and cells can be used as an effective therapeutic tool with controllable features for versatile drug delivery and tissue regeneration.

[1]  Detang Lu,et al.  Microfluidic analysis of pressure drop and flow behavior in hypertensive micro vessels , 2015, Biomedical microdevices.

[2]  Charles A Vacanti,et al.  Tissue Engineering of Autologous Cartilage for Craniofacial Reconstruction by Injection Molding , 2003, Plastic and reconstructive surgery.

[3]  M. Shoichet,et al.  Hyaluronic acid click hydrogels emulate the extracellular matrix. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[4]  Ming-Chuan Leu,et al.  Progress in Additive Manufacturing and Rapid Prototyping , 1998 .

[5]  Dong-Woo Cho,et al.  Enhancement of bone regeneration through facile surface functionalization of solid freeform fabrication-based three-dimensional scaffolds using mussel adhesive proteins. , 2012, Acta biomaterialia.

[6]  Clemens A van Blitterswijk,et al.  Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing. , 2010, Acta biomaterialia.

[7]  Faleh Tamimi,et al.  Craniofacial vertical bone augmentation: a comparison between 3D printed monolithic monetite blocks and autologous onlay grafts in the rabbit. , 2009, Biomaterials.

[8]  Yi Zhang,et al.  Embryonic stem cell and induced pluripotent stem cell: an epigenetic perspective , 2012, Cell Research.

[9]  L. Gioglio,et al.  Natural and Synthetic Biodegradable Polymers: Different Scaffolds for Cell Expansion and Tissue Formation , 2014 .

[10]  Guohua Xu,et al.  3D artificial bones for bone repair prepared by computed tomography-guided fused deposition modeling for bone repair. , 2014, ACS applied materials & interfaces.

[11]  Jianhua Zhang,et al.  3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia. , 2014, Journal of materials chemistry. B.

[12]  Guang Yang,et al.  Osteogenic effect of controlled released rhBMP-2 in 3D printed porous hydroxyapatite scaffold. , 2016, Colloids and surfaces. B, Biointerfaces.

[13]  H. Winet,et al.  Acidity near eroding polylactide-polyglycolide in vitro and in vivo in rabbit tibial bone chambers. , 1996, Biomaterials.

[14]  Dong-Woo Cho,et al.  A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration , 2013, Biotechnology and bioengineering.

[15]  Christine Mummery,et al.  Human embryonic stem cells: research, ethics and policy. , 2003, Human reproduction.

[16]  Akhilesh K. Gaharwar,et al.  Polymers for Bioprinting , 2015 .

[17]  Dong-Woo Cho,et al.  Three-dimensional printing of rhBMP-2-loaded scaffolds with long-term delivery for enhanced bone regeneration in a rabbit diaphyseal defect. , 2014, Tissue engineering. Part A.

[18]  Birgit Glasmacher,et al.  Laser printing of stem cells for biofabrication of scaffold-free autologous grafts. , 2011, Tissue engineering. Part C, Methods.

[19]  Mark A. Skylar-Scott,et al.  Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.

[20]  B. Duan,et al.  3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. , 2013, Journal of biomedical materials research. Part A.

[21]  D. Cho,et al.  Improvement of bone regeneration capability of ceramic scaffolds by accelerated release of their calcium ions. , 2014, Tissue engineering. Part A.

[22]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[23]  Jan Feijen,et al.  Rapid photo-crosslinking of fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers for drug delivery applications. , 2010, Journal of controlled release : official journal of the Controlled Release Society.

[24]  Frank A. Müller,et al.  Direct Printing of Bioceramic Implants with Spatially Localized Angiogenic Factors , 2007 .

[25]  Vladimir Mironov,et al.  Organ printing: tissue spheroids as building blocks. , 2009, Biomaterials.

[26]  Dong-Woo Cho,et al.  Development of a bone reconstruction technique using a solid free-form fabrication (SFF)-based drug releasing scaffold and adipose-derived stem cells. , 2013, Journal of biomedical materials research. Part A.

[27]  Dong-Woo Cho,et al.  Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration. , 2015, Biomaterials.

[28]  D. Cho,et al.  Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system , 2012 .

[29]  Jeremy J. Mao,et al.  Protein-releasing polymeric scaffolds induce fibrochondrocytic differentiation of endogenous cells for knee meniscus regeneration in sheep , 2014, Science Translational Medicine.

[30]  Dong-Woo Cho,et al.  An additive manufacturing‐based PCL–alginate–chondrocyte bioprinted scaffold for cartilage tissue engineering , 2015, Journal of tissue engineering and regenerative medicine.

[31]  Stuart K Williams,et al.  Three-dimensional bioassembly tool for generating viable tissue-engineered constructs. , 2004, Tissue engineering.

[32]  Deok‐Ho Kim,et al.  Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.

[33]  Dong-Woo Cho,et al.  A novel tissue-engineered trachea with a mechanical behavior similar to native trachea. , 2015, Biomaterials.

[34]  Zhang Changqing,et al.  3D-printed dimethyloxallyl glycine delivery scaffolds to improve angiogenesis and osteogenesis. , 2015, Biomaterials science.

[35]  Changqing Zhang,et al.  Three-dimensional printing of strontium-containing mesoporous bioactive glass scaffolds for bone regeneration. , 2014, Acta biomaterialia.

[36]  Yoshito Ikada,et al.  Challenges in tissue engineering , 2006, Journal of The Royal Society Interface.

[37]  Dong-Woo Cho,et al.  Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification , 2009, Journal of materials science. Materials in medicine.

[38]  Karthikeyan Narayanan,et al.  Lineage restricted progenitors for the repopulation of decellularized heart. , 2011, Biomaterials.

[39]  R. Marchant,et al.  Design properties of hydrogel tissue-engineering scaffolds , 2011, Expert review of medical devices.

[40]  Vamsi Krishna Balla,et al.  Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering , 2013, Journal of tissue engineering and regenerative medicine.

[41]  Dong-Woo Cho,et al.  Hybrid scaffold composed of hydrogel/3D-framework and its application as a dopamine delivery system. , 2014, Journal of controlled release : official journal of the Controlled Release Society.

[42]  D. Cho,et al.  Human turbinate mesenchymal stromal cell sheets with bellows graft for rapid tracheal epithelial regeneration. , 2015, Acta biomaterialia.

[43]  Jianzhong Fu,et al.  Freeform inkjet printing of cellular structures with bifurcations , 2015, Biotechnology and bioengineering.

[44]  I. Hutchings,et al.  Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing , 2013, Biofabrication.

[45]  Jia-cong Shen,et al.  Cartilage tissue engineering PLLA scaffold with surface immobilized collagen and basic fibroblast growth factor. , 2005, Biomaterials.

[46]  E. Toyserkani,et al.  Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[47]  Laura E Niklason,et al.  Readily Available Tissue-Engineered Vascular Grafts , 2011, Science Translational Medicine.

[48]  Glenn D Prestwich,et al.  Synthesis and characterization of novel thiol-reactive poly(ethylene glycol) cross-linkers for extracellular-matrix-mimetic biomaterials. , 2007, Biomacromolecules.

[49]  Fabien Guillemot,et al.  In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice , 2010, Biofabrication.

[50]  Wei Huang,et al.  Fabrication and characterization of porous HA/β-TCP scaffolds strengthened with micro-ribs structure , 2013 .

[51]  Fabien Guillemot,et al.  Laser-assisted cell printing: principle, physical parameters versus cell fate and perspectives in tissue engineering. , 2010, Nanomedicine.

[52]  Dong-Woo Cho,et al.  Three-dimensional printing of antibiotics-loaded poly-ε-caprolactone/poly(lactic-co-glycolic acid) scaffolds for treatment of chronic osteomyelitis , 2015, Tissue Engineering and Regenerative Medicine.

[53]  J. Mckinsey,et al.  Conduit Choice for Above-knee Femoropopliteal Bypass Grafting in Patients with Limb-threatening Ischemia , 2002, Annals of vascular surgery.

[54]  Dong-Woo Cho,et al.  Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking. , 2016, Acta biomaterialia.

[55]  Nan Ma,et al.  Laser printing of skin cells and human stem cells. , 2010, Tissue engineering. Part C, Methods.

[56]  Jake E. Barralet,et al.  Simultaneous Immobilization of Bioactives During 3D Powder Printing of Bioceramic Drug‐Release Matrices , 2010 .

[57]  P. Vogt,et al.  Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice , 2013, PloS one.

[58]  Jos Malda,et al.  Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds. , 2012, Tissue engineering. Part C, Methods.

[59]  Dong-Woo Cho,et al.  3D printing technology to control BMP-2 and VEGF delivery spatially and temporally to promote large-volume bone regeneration. , 2015, Journal of materials chemistry. B.

[60]  Jason A Inzana,et al.  3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. , 2014, Biomaterials.

[61]  M. S. Freitas,et al.  Fabrication of PCL/β-TCP scaffolds by 3D mini-screw extrusion printing , 2016 .

[62]  Dong-Woo Cho,et al.  Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint , 2016, Biofabrication.

[63]  M. Mimeault,et al.  Recent Progress on Tissue-Resident Adult Stem Cell Biology and Their Therapeutic Implications , 2008, Stem Cell Reviews.

[64]  Fwu-Hsing Liu,et al.  Synthesis of biomedical composite scaffolds by laser sintering: Mechanical properties and in vitro bioactivity evaluation , 2014 .

[65]  Narutoshi Hibino,et al.  Cell-seeding techniques in vascular tissue engineering. , 2010, Tissue engineering. Part B, Reviews.

[66]  Shuying Yang,et al.  Advances in Reprogramming Somatic Cells to Induced Pluripotent Stem Cells , 2010, Stem Cell Reviews and Reports.

[67]  Stefan Lohfeld,et al.  Effect of Hydroxyapatite on Biodegradable Scaffolds Fabricated by SLS , 2008 .

[68]  Matthew B Hoy.  3D Printing: Making Things at the Library , 2013, Medical reference services quarterly.

[69]  Tae Gwan Park,et al.  Hyaluronic acid modified biodegradable scaffolds for cartilage tissue engineering. , 2005, Biomaterials.

[70]  James J. Yoo,et al.  Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications , 2012, Biofabrication.

[71]  Larry L Hench,et al.  Third-Generation Biomedical Materials , 2002, Science.

[72]  Daniel Scherman,et al.  Growth factor delivery approaches in hydrogels. , 2009, Biomacromolecules.

[73]  Stefan Lohfeld,et al.  Selective laser sintering of hydroxyapatite/poly-epsilon-caprolactone scaffolds. , 2010, Acta biomaterialia.

[74]  Benjamin M Wu,et al.  Recent advances in 3D printing of tissue engineering scaffolds. , 2012, Methods in molecular biology.

[75]  H. Kim,et al.  Core-shell designed scaffolds of alginate/alpha-tricalcium phosphate for the loading and delivery of biological proteins. , 2013, Journal of biomedical materials research. Part A.

[76]  Peter X Ma,et al.  Surface modification of interconnected porous scaffolds. , 2005, Journal of biomedical materials research. Part A.

[77]  Anthony Atala,et al.  Isolation of amniotic stem cell lines with potential for therapy , 2007, Nature Biotechnology.

[78]  Ping Lan,et al.  Studies on the synthesis and thermal properties of copoly(L‐lactic acid/glycolic acid) by direct melt polycondensation , 2004 .

[79]  R. Poulsom,et al.  Adult stem cell plasticity , 2002, The Journal of pathology.

[80]  William V Giannobile,et al.  Nano-fibrous scaffold for controlled delivery of recombinant human PDGF-BB. , 2006, Journal of controlled release : official journal of the Controlled Release Society.

[81]  Dong-Woo Cho,et al.  Solid freeform fabrication technology applied to tissue engineering with various biomaterials , 2012 .

[82]  D. D’Lima,et al.  Direct human cartilage repair using three-dimensional bioprinting technology. , 2012, Tissue engineering. Part A.

[83]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[84]  Jason A Inzana,et al.  3D printed bioceramics for dual antibiotic delivery to treat implant-associated bone infection. , 2015, European cells & materials.

[85]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[86]  Dong-Woo Cho,et al.  Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs. , 2015, Acta biomaterialia.

[87]  Yoshihiro Ito,et al.  Covalently immobilized biosignal molecule materials for tissue engineering. , 2007, Soft matter.

[88]  Ryan C Bailey,et al.  Photopatterning of vascular endothelial growth factor within collagen-glycosaminoglycan scaffolds can induce a spatially confined response in human umbilical vein endothelial cells. , 2014, Acta biomaterialia.

[89]  David Bak,et al.  Rapid prototyping or rapid production? 3D printing processes move industry towards the latter , 2003 .

[90]  Bin Wu,et al.  Effects of microwave sintering on the properties of porous hydroxyapatite scaffolds , 2013 .

[91]  Shuqin Yan,et al.  Silk Fibroin Based Porous Materials , 2009, Materials.

[92]  Marcy Zenobi-Wong,et al.  Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting , 2015, Biofabrication.

[93]  L. Griffith,et al.  Tissue Engineering--Current Challenges and Expanding Opportunities , 2002, Science.

[94]  A. Koch,et al.  Micro-precise spatiotemporal delivery system embedded in 3D printing for complex tissue regeneration , 2016, Biofabrication.

[95]  K. Hochedlinger,et al.  Harnessing the potential of induced pluripotent stem cells for regenerative medicine , 2011, Nature Cell Biology.

[96]  R. Reis,et al.  Effect of scaffold architecture and BMP-2/BMP-7 delivery on in vitro bone regeneration , 2010, Journal of materials science. Materials in medicine.

[97]  T. Klingebiel,et al.  Adult stem cells as an alternative source of multipotential (pluripotential) cells in regenerative medicine. , 2009, Current Stem Cell Research & Therapy.

[98]  Roger J Narayan,et al.  Indirect rapid prototyping of antibacterial acid anhydride copolymer microneedles , 2012, Biofabrication.

[99]  T. Scheibel,et al.  Biofabrication of cell-loaded 3D spider silk constructs. , 2015, Angewandte Chemie.

[100]  Subbu Venkatraman,et al.  Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking , 2015, Biomedical microdevices.

[101]  H. Ohgushi,et al.  Recombinant human bone morphogenetic protein-2 promotes osteogenesis within atelopeptide type I collagen solution by combination with rat cultured marrow cells. , 2002, Journal of biomedical materials research.

[102]  Eric D. Miller,et al.  Microenvironments Engineered by Inkjet Bioprinting Spatially Direct Adult Stem Cells Toward Muscle‐ and Bone‐Like Subpopulations , 2008, Stem cells.

[103]  Stefan Milz,et al.  Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing , 2005 .

[104]  K. Shakesheff,et al.  Characterisation of the surface structure of 3D printed scaffolds for cell infiltration and surgical suturing , 2016, Biofabrication.

[105]  Marcello Romiti,et al.  Meta-analysis of polytetrafluoroethylene bypass grafts to infrapopliteal arteries. , 2003, Journal of vascular surgery.

[106]  David J. Mooney,et al.  Polymeric Growth Factor Delivery Strategies for Tissue Engineering , 2003, Pharmaceutical Research.

[107]  James J. Yoo,et al.  Bioprinted Amniotic Fluid‐Derived Stem Cells Accelerate Healing of Large Skin Wounds , 2012, Stem cells translational medicine.

[108]  Benjamin Wu,et al.  Customized biomimetic scaffolds created by indirect three-dimensional printing for tissue engineering , 2013, Biofabrication.

[109]  Yoshiaki,et al.  Preparations of biodegradable nanospheres of water-soluble and insoluble drugs with D, L-lactide/glycolide copolymer by a novel spontaneous emulsification solvent diffusion method, and the drug release behavior. , 1993 .

[110]  Kristi S Anseth,et al.  Functional PEG-peptide hydrogels to modulate local inflammation induced by the pro-inflammatory cytokine TNFalpha. , 2009, Biomaterials.

[111]  Yong Wang,et al.  Hydrogel functionalization with DNA aptamers for sustained PDGF-BB release. , 2010, Chemical communications.

[112]  Shintaroh Iwanaga,et al.  Three-dimensional inkjet biofabrication based on designed images , 2011, Biofabrication.

[113]  R. Landers,et al.  Biofunctional rapid prototyping for tissue‐engineering applications: 3D bioplotting versus 3D printing , 2004 .

[114]  Kevin M. Shakesheff,et al.  Tissue engineering: strategies, stem cells and scaffolds , 2008, Journal of anatomy.

[115]  H. Blau,et al.  Critical role of microenvironmental factors in angiogenesis , 2005, Current atherosclerosis reports.

[116]  Changqing Zhang,et al.  Three-dimensional printed strontium-containing mesoporous bioactive glass scaffolds for repairing rat critical-sized calvarial defects. , 2015, Acta biomaterialia.

[117]  Arash Khojasteh,et al.  The effect of PCL-TCP scaffold loaded with mesenchymal stem cells on vertical bone augmentation in dog mandible: a preliminary report. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

[118]  Tao Xu,et al.  High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology , 2008 .

[119]  Buddy D. Ratner,et al.  Biomaterials Science: An Introduction to Materials in Medicine , 1996 .

[120]  Dong-Woo Cho,et al.  Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering , 2016, Biofabrication.

[121]  D. Cho,et al.  Development of hybrid scaffolds using ceramic and hydrogel for articular cartilage tissue regeneration. , 2015, Journal of biomedical materials research. Part A.

[122]  Yi-Wen Chen,et al.  Poly(Dopamine)-Assisted Immobilization of Xu Duan on 3D Printed Poly(Lactic Acid) Scaffolds to Up-Regulate Osteogenic and Angiogenic Markers of Bone Marrow Stem Cells , 2015, Materials.

[123]  Xiaojian Ye,et al.  3D-printed hierarchical scaffold for localized isoniazid/rifampin drug delivery and osteoarticular tuberculosis therapy. , 2015, Acta biomaterialia.

[124]  Nupura S. Bhise,et al.  Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels , 2014, Biofabrication.

[125]  GeunHyung Kim,et al.  Rapid-prototyped collagen scaffolds reinforced with PCL/β-TCP nanofibres to obtain high cell seeding efficiency and enhanced mechanical properties for bone tissue regeneration , 2012 .

[126]  Frederik L. Giesel,et al.  3D printing based on imaging data: review of medical applications , 2010, International Journal of Computer Assisted Radiology and Surgery.

[127]  Dong-Woo Cho,et al.  Fabrication of blended polycaprolactone/poly(lactic-co-glycolic acid)/β-tricalcium phosphate thin membrane using solid freeform fabrication technology for guided bone regeneration. , 2013, Tissue engineering. Part A.

[128]  Jeffrey L Goldberg,et al.  Control of Retinal Ganglion Cell Positioning and Neurite Growth: Combining 3D Printing with Radial Electrospun Scaffolds. , 2016, Tissue engineering. Part A.

[129]  W. Hennink,et al.  Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing. , 2007, Tissue engineering.

[130]  D. Cho,et al.  3D-Printed Drug/Cell Carrier Enabling Effective Release of Cyclosporin a for Xenogeneic Cell-Based Therapy , 2015, Cell transplantation.

[131]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[132]  Chikara Ohtsuki,et al.  A unified in vitro evaluation for apatite-forming ability of bioactive glasses and their variants , 2015, Journal of Materials Science: Materials in Medicine.

[133]  Rui L Reis,et al.  Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency. , 2011, Acta biomaterialia.

[134]  Dong-Woo Cho,et al.  Development of an indirect stereolithography technology for scaffold fabrication with a wide range of biomaterial selectivity. , 2012, Tissue engineering. Part C, Methods.

[135]  P. Ma,et al.  Synthetic biodegradable functional polymers for tissue engineering: a brief review , 2014, Science China Chemistry.

[136]  O. Hermanson,et al.  Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation. , 2007, Biomaterials.

[137]  Dong-Woo Cho,et al.  Surface modification with fibrin/hyaluronic acid hydrogel on solid-free form-based scaffolds followed by BMP-2 loading to enhance bone regeneration. , 2011, Bone.

[138]  S. Milz,et al.  Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.

[139]  Min Zhu,et al.  Three-dimensional printing of cerium-incorporated mesoporous calcium-silicate scaffolds for bone repair , 2015, Journal of Materials Science.

[140]  C. Rhodes,et al.  Controlled drug delivery by biodegradable poly(ester) devices: different preparative approaches. , 1998, Drug development and industrial pharmacy.

[141]  Geunhyung Kim,et al.  Collagen/alginate scaffolds comprising core (PCL)-shell (collagen/alginate) struts for hard tissue regeneration: fabrication, characterisation, and cellular activities. , 2013, Journal of materials chemistry. B.

[142]  Zsolt Bor,et al.  Survival and proliferative ability of various living cell types after laser-induced forward transfer. , 2005, Tissue engineering.

[143]  Dong-Woo Cho,et al.  In vitro and in vivo evaluation of bone formation using solid freeform fabrication-based bone morphogenic protein-2 releasing PCL/PLGA scaffolds , 2014, Biomedical materials.

[144]  D. Kohane,et al.  HYDROGELS IN DRUG DELIVERY: PROGRESS AND CHALLENGES , 2008 .

[145]  Dong-Woo Cho,et al.  3D Printing technology over a drug delivery for tissue engineering. , 2015, Current pharmaceutical design.

[146]  U. Demirci,et al.  Bioprinting for stem cell research. , 2013, Trends in biotechnology.

[147]  Liang Ma,et al.  Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery. , 2015, Biomaterials.

[148]  Robert E Guldberg,et al.  Differences between in vitro viability and differentiation and in vivo bone-forming efficacy of human mesenchymal stem cells cultured on PCL-TCP scaffolds. , 2010, Biomaterials.

[149]  Dong-Woo Cho,et al.  Stimulation of healing within a rabbit calvarial defect by a PCL/PLGA scaffold blended with TCP using solid freeform fabrication technology , 2012, Journal of Materials Science: Materials in Medicine.

[150]  P. Bianco,et al.  The use of adult stem cells in rebuilding the human face. , 2006, Journal of the American Dental Association.

[151]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[152]  Dong-Woo Cho,et al.  Indirect three-dimensional printing of synthetic polymer scaffold based on thermal molding process , 2014, Biofabrication.

[153]  Y. Liu,et al.  Dual drug spatiotemporal release from functional gradient scaffolds prepared using 3D bioprinting and electrospinning , 2016 .

[154]  P. Bártolo,et al.  Additive manufacturing of tissues and organs , 2012 .

[155]  R. Samanipour,et al.  A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks , 2015, Biofabrication.

[156]  D. Cho,et al.  Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres. , 2011, Biomaterials.

[157]  Da-Ming Wang,et al.  Promotion of cell affinity of porous PLLA scaffolds by immobilization of RGD peptides via plasma treatment. , 2006, Macromolecular bioscience.

[158]  Vivian K. Lee,et al.  Three-dimensional bioprinting and tissue fabrication: prospects for drug discovery and regenerative medicine , 2015 .

[159]  Ali Ahmadi,et al.  Investigation of the hydrodynamic response of cells in drop on demand piezoelectric inkjet nozzles , 2016, Biofabrication.

[160]  Michelle L. Oyen,et al.  Hydrogel Composite Materials for Tissue Engineering Scaffolds , 2013 .

[161]  L G Griffith,et al.  Integration of surface modification and 3D fabrication techniques to prepare patterned poly(L-lactide) substrates allowing regionally selective cell adhesion. , 1998, Journal of biomaterials science. Polymer edition.

[162]  Dong-Woo Cho,et al.  Projection image-generation algorithm for fabrication of a complex structure using projection-based microstereolithography , 2012 .

[163]  Matthias P. Lutolf,et al.  Designing materials to direct stem-cell fate , 2009, Nature.

[164]  Yinghong Zhou,et al.  3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis , 2012 .

[165]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[166]  Johnny Huard,et al.  Engineering spatial control of multiple differentiation fates within a stem cell population. , 2011, Biomaterials.

[167]  H. Seitz,et al.  Drug Delivery From Poly(ethylene glycol) Diacrylate Scaffolds Produced by DLC Based Micro‐Stereolithography , 2014 .

[168]  Dong-Woo Cho,et al.  Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit , 2014, Biomedical materials.

[169]  David J Mooney,et al.  Cell delivery mechanisms for tissue repair. , 2008, Cell stem cell.

[170]  Berthold Nies,et al.  3D plotting of growth factor loaded calcium phosphate cement scaffolds. , 2015, Acta biomaterialia.

[171]  Amit Bandyopadhyay,et al.  3D printed tricalcium phosphate bone tissue engineering scaffolds: effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect model , 2013 .

[172]  F. Guillemot,et al.  Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. , 2010, Biomaterials.

[173]  Stuart K Williams,et al.  Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[174]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[175]  Tae Gwan Park,et al.  Surface engineered and drug releasing pre-fabricated scaffolds for tissue engineering. , 2007, Advanced drug delivery reviews.

[176]  D. Cho,et al.  Biomimetic 3D tissue printing for soft tissue regeneration. , 2015, Biomaterials.

[177]  Hermann Seitz,et al.  Ceramic scaffolds produced by computer-assisted 3D printing and sintering: characterization and biocompatibility investigations. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[178]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[179]  James J. Yoo,et al.  Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology. , 2013, Biomaterials.

[180]  D. Cho,et al.  3D printing of composite tissue with complex shape applied to ear regeneration , 2014, Biofabrication.

[181]  E. Hay,et al.  Cell Biology of Extracellular Matrix , 1988, Springer US.

[182]  W. Friess,et al.  Collagen sponges for bone regeneration with rhBMP-2. , 2003, Advanced drug delivery reviews.