Improved insert geometry for reducing tank-wall losses in pad-mounted transformers

This paper presents a numerical analysis of losses generated in the tank-wall surrounding the high-current bushings of pad-mounted transformers using a three-dimensional (3-D) finite-element approach. Two cases are analyzed to study the impact of inserting small plates of different geometry (located near the high-current phases) on the reduction of tank losses. Significant reductions in stray losses occurring in the tank wall are obtained with plate inserts of low-cost. With the "T" configuration proposed in this paper, we reduce the tank-wall losses by a factor of 1/21 at rated current when compared with the case of tank wall without the stainless-steel plate. A 3-D time-harmonic finite-element model is used to determine the losses in the tank wall. Two load loss tests were carried out on experimental transformers to validate the simulations and effectiveness of the low-cost inserts.

[1]  Song-Yop Hahn,et al.  Improved design of cover plates of power transformers for lower eddy current losses , 1999, IEEE International Magnetics Conference.

[2]  Keizo Inagaki,et al.  Eddy Currents in Structure Surrounding Large Current Bushings of a Large Capacity Transformer , 1981 .

[3]  Christian Magele,et al.  Different finite element formulations of 3D magnetostatic fields , 1992 .

[4]  Turan Gonen,et al.  Electric power distribution system engineering , 1985 .

[5]  Tang Renyuan,et al.  Computation of eddy current losses by heavy current leads and windings in large transformers using IEM coupled with improved R- Psi method , 1990 .

[6]  Kimio Nakamura,et al.  Transient time measurement of head magnetic field by using electron beam tomography , 1999 .

[7]  W. G. Deuring.  Induced Losses in Steel Plates in the Presence of an Alternating Current , 1957, Transactions of the American Institute of Electrical Engineers Part III Power Apparatus and Systems.

[8]  S. A. Khaparde,et al.  Stray loss evaluation in power transformers-a review , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[9]  H. Otani,et al.  Eddy Currents in Structure Surrounding Large Current Bushings of a Large Capacity Transformer , 1981, IEEE Transactions on Power Apparatus and Systems.

[10]  K. Preis,et al.  On the use of the magnetic vector potential in the finite-element analysis of three-dimensional eddy currents , 1989 .

[11]  H. Poritsky,et al.  Eddy-current losses in a semi-infinite solid due to a nearby alternating current , 1954, Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics.

[12]  Tang Renyuan,et al.  Eddy current fields and overheating problems due to heavy current carrying conductors , 1994 .

[13]  J. Turowski,et al.  Eddy current losses and hot-spot evaluation in cover plates of power transformers , 1997 .

[14]  R. Feinberg.  Modern power transformer practice , 1979 .

[15]  Tang Renyuan,et al.  Solutions of three-dimensional multiply connected and open boundary problems by BEM in three-phase combination transformers , 1992 .

[16]  Ronnie Belmans,et al.  Coupled thermo-magnetic simulation of a foil-winding transformer connected to a nonlinear load , 2000 .

[17]  M. THOMAS.  Mathematical Model of Load Loss in Shell Form Transformers , 1979, IEEE Transactions on Power Apparatus and Systems.