Ballistic Resistant Body Armor: Contemporary and Prospective Materials and Related Protection Mechanisms

[1]  W. D. de Heer,et al.  Carbon Nanotubes--the Route Toward Applications , 2002, Science.

[2]  S. Joshi,et al.  Are natural fiber composites environmentally superior to glass fiber reinforced composites , 2004 .

[3]  Ya-Li Li,et al.  Direct Spinning of Carbon Nanotube Fibers from Chemical Vapor Deposition Synthesis , 2004, Science.

[4]  P. D. Brown,et al.  Shock-absorbing and failure mechanisms of WS2 and MoS2 nanoparticles with fullerene-like structures under shock wave pressure. , 2005, Journal of the American Chemical Society.

[5]  R. Tenne,et al.  Inorganic Nanotubes and Fullerene-Like Structures (IF) , 2007 .

[6]  A. S. Mokhtar,et al.  Many aspects to improve damage tolerance of collapsible composite energy absorber devices , 2005 .

[7]  Chad A. Ulven,et al.  Effect of projectile shape during ballistic perforation of VARTM carbon/epoxy composite panels , 2003 .

[8]  M. J. Normandia,et al.  Impact Response and Analysis of Several Silicon Carbides , 2005 .

[9]  N. K. Naik,et al.  Ballistic impact behaviour of woven fabric composites: Formulation , 2006 .

[10]  Chwee Teck Lim,et al.  Dynamic mechanical properties of fabric armour , 2001 .

[11]  J. Fischer,et al.  Interfacial in situ polymerization of single wall carbon nanotube/nylon 6,6 nanocomposites , 2006 .

[12]  Xin Wang,et al.  Low velocity impact properties of 3D woven basalt/aramid hybrid composites , 2008 .

[13]  Jonathan W. Bender,et al.  Reversible shear thickening in monodisperse and bidisperse colloidal dispersions , 1996 .

[14]  J. Brisson,et al.  Kevlar and glass fiber treatment for thermoplastic composites by step polycondensation , 2007 .

[15]  C. Navarro,et al.  Numerical modeling of the impact behavior of new particulate-loaded composite materials , 2003 .

[16]  Vicki P. McConnell.  Ballistic protection materials a moving target , 2006 .

[17]  Mustafa Übeyli,et al.  On the comparison of the ballistic performance of steel and laminated composite armors , 2007 .

[18]  J. Brisson,et al.  Nylon/Kevlar composites. I: Mechanical properties† , 1991 .

[19]  Bryan Cheeseman,et al.  Modeling the role of friction during ballistic impact of a high-strength plain-weave fabric , 2005 .

[20]  Sia Nemat-Nasser,et al.  The effect of thin membrane restraint on the ballistic performance of armor grade ceramic tiles , 2007 .

[21]  P. Patra,et al.  Nanostructured ultraviolet resistant polymer coatings , 2006 .

[22]  M. J. Drews,et al.  Effects of gamma irradiation, irradiation environment, and postirradiation aging on thermal and tensile properties of ultrahigh molecular weight polyethylene fibers , 1996 .

[23]  K. Hemker,et al.  Shock-Induced Localized Amorphization in Boron Carbide , 2003, Science.

[24]  Darrell H. Reneker,et al.  Effects of parameters on nanofiber diameter determined from electrospinning model , 2007 .

[25]  Shun-Chin Chou,et al.  Application of the Depth-of-Penetration Test Methodology to Characterize Ceramics for Personnel Protection , 2000 .

[26]  Gabriella Faur-Csukat,et al.  A Study on the Ballistic Performance of Composites , 2006 .

[27]  Duane S. Cronin,et al.  Influence of Material Properties on the Ballistic Performance of Ceramics for Personal Body Armour , 2003 .

[28]  J. Njuguna,et al.  Nanofiller‐reinforced polymer nanocomposites , 2008 .

[29]  I. Ahmad,et al.  Study of Fiber Surface Treatment on Reinforcement/Matrix Interaction in Twaron Fiber/ENR Composites , 2005 .

[30]  Rong Huang,et al.  High toughness in laminated SiC ceramics from aqueous tape casting , 2005 .

[31]  David L. Kaplan,et al.  Mechanical and thermal properties of dragline silk from the spider Nephila clavipes , 1994 .

[32]  Eric D. Wetzel,et al.  The ballistic impact characteristics of Kevlar® woven fabrics impregnated with a colloidal shear thickening fluid , 2003 .

[33]  J. Ganghoffer,et al.  Consideration of the yarn–yarn interactions in meso/macro discrete model of fabric: Part II: Woven fabric under uniaxial and biaxial extension , 2007 .

[34]  S. Mukhopadhyay,et al.  Effect of ageing of sisal fibres on properties of sisal – Polypropylene composites , 2008 .

[35]  Sabu Thomas,et al.  Effect of ageing on the physical and mechanical properties of sisal-fiber-reinforced polyethylene composites , 1995 .

[36]  M.O.W. Richardson,et al.  The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites , 2007 .

[37]  J. Tascón,et al.  Thermal decomposition of poly(p-phenylene benzobisoxazole) fibres: monitoring the chemical and nanostructural changes by Raman spectroscopy and scanning probe microscopy , 2004 .

[38]  John W. Gillespie,et al.  Application of porous metal foams in hybrid armor systems , 2001 .

[39]  Serge Bourbigot,et al.  Study of the thermal degradation of high performance fibres—application to polybenzazole and p-aramid fibres , 2001 .

[40]  Kin Liao,et al.  Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites , 2002 .

[41]  Raymond A. Cutler,et al.  Hardness/Toughness Relationship for Sic Armor , 2008 .

[42]  M. Misra,et al.  Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World , 2002, Renewable Energy.

[43]  Frank Ko,et al.  Modeling of the ballistic behavior of gradient design composite armors , 2000 .

[44]  Dirceu Spinelli,et al.  Fracture toughness of natural fibers/castor oil polyurethane composites , 2006 .

[45]  V. Tan,et al.  Modelling inter‐yarn friction in woven fabric armour , 2006 .

[46]  Mulalo Doyoyo.  Experiments on the penetration of thin long-rod projectiles into thick long-cylindrical borosilicate targets under pressure-free polycarbonate, aluminum and steel confinements , 2003 .

[47]  Swapan Das,et al.  Synthesis of silicon carbide mats using natural fibers , 2003 .

[48]  P. D. Brown,et al.  WS2 and MoS2 Inorganic Fullerenes—Super Shock Absorbers at Very High Pressures , 2005 .

[49]  Elizabeth K Bye,et al.  An analysis of apparel industry fit sessions , 2005 .

[50]  C.A.J.R. Vermeeren,et al.  An Historic Overview of the Development of Fibre Metal Laminates , 2003 .

[51]  M. J. Normandia,et al.  Sphere Impact Induced Damage in Ceramics: I. Armor‐Grade SiC and TiB2 , 2008 .

[52]  M. Boyce,et al.  Materials design principles of ancient fish armour. , 2008, Nature materials.

[53]  Vincent B. C. Tan,et al.  Influence of boundary conditions on the ballistic performance of high-strength fabric targets , 2005 .

[54]  Bryan Cheeseman,et al.  A numerical investigation of the influence of friction on energy absorption by a high-strength fabric subjected to ballistic impact , 2006 .

[55]  E. E. Magat.  Fibres from extended chain aromatic polyamides , 1980, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[56]  Cynthia Bir,et al.  Injuries to law enforcement officers: the backface signature injury. , 2008, Forensic science international.

[57]  Rimantas Barauskas,et al.  Computational analysis of impact of a bullet against the multilayer fabrics in LS-DYNA , 2007 .

[58]  W. E. Billups,et al.  Tuning the mechanical properties of SWNT/nylon 6,10 composites with flexible spacers at the interface. , 2007, Nano letters.

[59]  Paul J Hogg,et al.  Composites in Armor , 2006, Science.

[60]  Kausala Mylvaganam,et al.  Ballistic resistance capacity of carbon nanotubes , 2007 .

[61]  Agrim Gupta,et al.  Investigation of ultra violet (UV) resistance for high strength fibers , 2006 .

[62]  Eric D. Wetzel,et al.  Stab Resistance of Shear Thickening Fluid (STF)-Kevlar Composites for Body Armor Applications , 2006 .

[63]  Manjusri Misra,et al.  Mechanical properties of carbon nanotubes and their polymer nanocomposites. , 2005, Journal of nanoscience and nanotechnology.

[64]  C. Thaumaturgo.  Shock-waves on polymer composites , 1997 .

[65]  Michael Sennett,et al.  High-Performance Carbon Nanotube Fiber , 2007, Science.

[66]  Mehmet Çolakoğlu,et al.  Experimental and Numerical Investigations on the Ballistic Performance of Polymer Matrix Composites Used in Armor Design , 2007 .

[67]  M. Sain,et al.  Studies on the Water Absorption Properties of Short Hemp—Glass Fiber Hybrid Polypropylene Composites , 2007 .

[68]  Vincent B. C. Tan,et al.  Strengthening fabric armour with silica colloidal suspensions , 2005 .

[69]  Ala Tabiei,et al.  Loosely woven fabric model with viscoelastic crimped fibres for ballistic impact simulations , 2004 .

[70]  T. Bogetti,et al.  Ballistic impact into fabric and compliant composite laminates , 2003 .

[71]  D. Reneker,et al.  Nanometre diameter fibres of polymer, produced by electrospinning , 1996 .

[72]  Chwee Teck Lim,et al.  Finite-element modeling of the ballistic impact of fabric armor , 2003 .

[73]  Ya-Li Li,et al.  Mechanical properties of continuously spun fibers of carbon nanotubes. , 2005, Nano letters.

[74]  Mica Grujicic,et al.  Ballistic Performance of Alumina/S‐2 Glass‐reinforced Polymer‐matrix Composite Hybrid Lightweight Armor Against Armor Piercing (ap) and Non‐AP Projectiles , 2007 .

[75]  Xin-Lin Gao,et al.  A Two Dimensional Rule-of-Mixtures Micromechanics Model for Woven Fabric Composites , 2000 .

[76]  R. Tenne,et al.  Synthesis and characterization of inorganic fullerene-like WSe2 material , 1998 .

[77]  Anil N. Netravali,et al.  Composites get greener , 2003 .

[78]  Mica Grujicic,et al.  Ballistic-performance optimization of a hybrid carbon-nanotube/E-glass reinforced poly-vinyl-ester-epoxy-matrix composite armor , 2007 .

[79]  Raymond A. Cutler,et al.  High-Toughness Silicon Carbide as Armor , 2005 .

[80]  M. S. Risby,et al.  Ballistic Performance of Coconut Shell Powder/Twaron Fabricagainst Non-armour Piercing Projectiles , 2008 .

[81]  A. Sabet,et al.  High velocity impact behavior of GRP panels containing coarse-sized sand filler , 2008 .

[82]  Srinivasan Arjun Tekalur,et al.  Ballistic Resistance of 2D and 3D Woven Sandwich Composites , 2007 .

[83]  Peter J. F. Harris,et al.  Carbon nanotube composites , 2004 .

[84]  N. Wagner,et al.  Dynamic properties of shear thickening colloidal suspensions , 2003 .

[85]  Lev Rapoport,et al.  Applications of WS2(MoS2) inorganic nanotubes and fullerene-like nanoparticles for solid lubrication and for structural nanocomposites , 2005 .

[86]  E. Thomas,et al.  3D Polymer Microframes That Exploit Length‐Scale‐Dependent Mechanical Behavior , 2006 .

[87]  Rimantas Barauskas.  Combining mezzo - and macro-mechanical approaches in a computational model of a ballistic impact upon textile targets , 2005 .

[88]  J. Ferraris,et al.  Continuous carbon nanotube composite fibers: properties, potential applications, and problemsElectronic supplementary information (ESI) available: frontispiece figure. See http://www.rsc.org/suppdata/jm/b3/b312092a/ , 2004 .

[89]  David J. Steigmann,et al.  A model for frictional slip in woven fabrics , 2003 .

[90]  Yiu-Wing Mai,et al.  Damage Wave Propagation in Elastic-brittle Materials , 1999 .

[91]  R. L. Woodward,et al.  A simple one-dimensional approach to modelling ceramic composite armour defeat , 1990 .

[92]  Alan H. Windle,et al.  The parameter space for the direct spinning of fibres and films of carbon nanotubes , 2007 .

[93]  Tsu-Wei Chou,et al.  Nanocomposites in context , 2005 .

[94]  David Starley,et al.  Determining the Technological Origins of Iron and Steel , 1999 .

[95]  R. Young,et al.  Micromechanical phenomena during hygrothermal ageing of model composites investigated by Raman spectroscopy. Part II: comparison of the behaviour of PBO and M5 fibres compared with Twaron , 2005 .

[96]  J. d’Almeida,et al.  Effect of Water Absorption on the Mechanical Properties of Sisal and Jute Fiber Composites , 1999 .

[97]  Amanda L. Forster,et al.  Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterization , 2007 .

[98]  G. Hauver,et al.  Interface Defeat of Long-Rod Projectiles by Ceramic Armor , 2005 .

[99]  M. Ciavarella,et al.  The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape , 2003 .

[100]  Muhammad Pervaiz,et al.  Carbon storage potential in natural fiber composites , 2003 .

[101]  Kirk D. Rice,et al.  Ballistic fibers: A review of the thermal, ultraviolet and hydrolytic stability of the benzoxazole ring structure , 2006 .

[102]  Nitin Kumar,et al.  High-performance elastomeric nanocomposites via solvent-exchange processing. , 2007, Nature materials.

[103]  George Marsh.  Composites fight for share of military applications , 2005 .

[104]  I. Verpoest,et al.  The response of natural fibre composites to ballistic impact by fragment simulating projectiles , 2007 .

[105]  Maya Jacob John,et al.  Biofibres and Biocomposites , 2008 .

[106]  N. Sombatsompop,et al.  Effect of moisture content on mechanical properties, thermal and structural stability and extrudate texture of poly(vinyl chloride)/wood sawdust composites , 2004 .

[107]  Miriam García,et al.  Influence of natural fiber type in eco‐composites , 2008 .

[108]  Stefan Hiermaier,et al.  Advanced numerical models and material characterisation techniques for composite materials subject to impact and shock wave loading , 2003 .

[109]  B. K. Fink,et al.  Aluminum foam integral armor: a new dimension in armor design , 2001 .

[110]  Brian J. Briscoe,et al.  The ballistic impact characteristics of aramid fabrics: The influence of interface friction , 1992 .

[111]  C. Santulli.  Post-impact damage characterisation on natural fibre reinforced composites using acoustic emission , 2001 .

[112]  Robert H. Scales.  Clausewitz and World War IV , 2009 .

[113]  Mark L. Wilkins,et al.  Mechanics of penetration and perforation , 1978 .

[114]  K. R. Atkinson,et al.  Multifunctional Carbon Nanotube Yarns by Downsizing an Ancient Technology , 2004, Science.

[115]  Asad A. Khalid.  The effect of testing temperature and volume fraction on impact energy of composites , 2006 .

[116]  V. Rangari,et al.  Enhancement of strength and stiffness of Nylon 6 filaments through carbon nanotubes reinforcement , 2006 .

[117]  B. Lee,et al.  Penetration Failure Mechanisms of Armor-Grade Fiber Composites under Impact , 2001 .

[118]  M. Terrones.  Science and Technology of the Twenty-First Century: Synthesis, Properties, and Applications of Carbon Nanotubes , 2003 .

[119]  A. Alves,et al.  Influence of weathering and gamma irradiation on the mechanical and ballistic behavior of UHMWPE composite armor , 2005 .

[120]  Arunachalam M. Rajendran,et al.  Dynamic Fracture of Ceramics in Armor Applications , 2007 .

[121]  Donald A. Shockey,et al.  Failure phenomenology of confined ceramic targets and impacting rods , 1990 .