Influence of plate material on the contact strength of Li4SiO4 pebbles in crush tests and evaluation of the contact strength in pebble–pebble contact

Lithium orthosilicate (Li4SiO4) pebbles are considered to be a candidate as tritium breeder in the helium cooled pebble bed (HCPB) blanket. Their contact strength is of concern since they might be crushed in the blanket under thermomechanical load. Crush tests for single pebbles are carried out to evaluate their strength. In these tests, single pebbles are crushed by a pair of parallel plates. In this way, the crush load, i.e., the maximum contact force between pebble and plates before failure of the pebble occurs, can be obtained. In this study, the influence of the plate material used in the crush tests on the crush load is investigated. Single Li4SiO4 pebbles are crushed by plates made of aluminum alloy (AL) and tungsten carbide (WC), respectively. Two corresponding crush load distributions are obtained. A probabilistic strength model is proposed to explain the influence of the plate material. Moreover, this model will be used to predict the contact strength of pebbles in pebble–pebble contact. The pebble–pebble contact strength can be used to investigate the influence of pebble failure on the thermomechanical response of the pebble beds.

[1]  M. Bolton,et al.  Quantifying the extent of crushing in granular materials: A probability-based predictive method , 2007 .

[2]  Wolfgang Peukert,et al.  Characterisation of Grinding‐Relevant Particle Properties by Inverting a Population Balance Model , 2002 .

[3]  R. Rolli,et al.  Crush probability analysis of ceramic breeder pebble beds under mechanical stresses , 2011 .

[4]  Glenn R. McDowell,et al.  THE APPLICATION OF WEIBULL STATISTICS TO THE FRACTURE OF SOIL PARTICLES , 2000 .

[5]  Masahiro Kato,et al.  Carbon dioxide absorption by lithium orthosilicate in a wide range of temperature and carbon dioxide concentrations , 2002 .

[6]  A general approach for the characterization of fragmentation problems , 2007 .

[7]  E. Diegele,et al.  The European breeding blankets development and the test strategy in ITER , 2005 .

[8]  Wolfgang Peukert,et al.  Determination of material properties relevant to grinding by practicable labscale milling tests , 2004 .

[9]  J. C. Jaeger.  Failure of rocks under tensile conditions , 1967 .

[10]  D. Aquaro,et al.  Mechanical characterization of Li2TiO3 and Li4SiO4 pebble beds: Experimental determination of the material properties and of the pebble bed effective values , 2007 .

[11]  D. Vollath,et al.  Doped lithium orthosilicate: Preparation and properties , 1990 .

[12]  Shuo Zhao,et al.  Multiscale Modeling of Thermomechanical Properties of Ceramic Pebbles , 2011 .

[13]  Glenn R. McDowell,et al.  A FAMILY OF YIELD LOCI BASED ON MICRO MECHANICS , 2000 .

[14]  Yukitoshi Oka,et al.  DETERMINATION OF THE TENSILE STRENGTH OF ROCK BY A COMPRESSION TEST OF AN IRREGULAR TEST PIECE , 1966 .

[15]  Adrian R. Russell,et al.  Point load tests and strength measurements for brittle spheres , 2009 .

[16]  H. Kawamura,et al.  Evaluation of contact strength of Li2TiO3 pebbles with different diameters , 2006 .

[17]  M. Donne,et al.  Properties of lithium orthosilicate spheres , 1988 .

[18]  Ian M. Hutchings,et al.  Fracture of brittle spheres under compression and impact loading. II: Results for lead-glass and sapphire spheres , 1993 .

[19]  G. Piazza,et al.  Behaviour of ceramic breeder materials in long time annealing experiments , 2001 .

[20]  Wolfgang Peukert,et al.  Breakage behaviour of different materials—construction of a mastercurve for the breakage probability , 2003 .

[21]  Adrian R. Russell,et al.  Crushing of particles in idealised granular assemblies , 2009 .

[22]  L. Giancarli,et al.  Candidate blanket concepts for a European fusion power plant study , 2000 .

[23]  Marc Kamlah,et al.  Discrete element modelling of pebble beds: With application to uniaxial compression tests of ceramic breeder pebble beds , 2010 .