Design and operation optimization of an internal reforming solid oxide fuel cell integrated system based on multi objective approach

Abstract The interaction between design parameters and operation variables is a complex problem that affects system techno-economic performance. The aim of this paper is to optimize the design and operation of an SOFC/MGT integrated system. The problem consists of design and operation optimization of an integrated SOFC/MGT system. Decision variables including design parameters (number of SOFC cells) as well as the operation parameters (air pressure ratio, methane and air flow rates). The multi objective approach using genetic algorithm is applied considering two pairs of proposed objectives: (1) maximization of output power and minimization of the electricity cost and (2) maximization of system electrical efficiency and minimization of the electricity cost. The results demonstrate minimum cost of electricity is 0.047$/kW h at 306.49 kW output power and 59.93% efficiency. The Pareto frontiers show that 11.23% growth of output power leads to only 5.3% increase in electricity cost and a growth of 12.18% increase of efficiency leads to only 4.05% increase in electricity cost, which is more favorable. Multi objective optimization provides valuable information about flexibility of trade-offs between design and operation variables for decision making and determination of system marginal cost.

[1]  H. Joseph Wen,et al.  Single solid oxide fuel cell modeling and optimization , 2011 .

[2]  Larry J. Chaney,et al.  FUEL CELL/MICRO-TURBINE COMBINED CYCLE , 1999 .

[3]  Shinji Kimijima.  Prospect of SOFC-MGT hybrid system , 2004 .

[4]  Francesco Calise,et al.  Single-level optimization of a hybrid SOFC-GT power plant , 2006 .

[5]  Daniel Favrat,et al.  Thermo-economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System , 2007 .

[6]  Yu Ching Tsai,et al.  Experimental simulation on the integration of solid oxide fuel cell and micro-turbine generation system , 2007 .

[7]  Ramin Roshandel,et al.  Multi objective optimization of solid oxide fuel cell stacks considering parameter effects: Fuel utilization and hydrogen cost , 2013 .

[8]  Aristide F. Massardo,et al.  Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine , 2001 .

[9]  Suttichai Assabumrungrat,et al.  Reviews on Solid Oxide Fuel Cell Technology , 2009 .

[10]  François Maréchal,et al.  A methodology for thermo-economic modeling and optimization of solid oxide fuel cell systems , 2007 .

[11]  Tong Seop Kim,et al.  Comparative evaluation of viable options for combining a gas turbine and a solid oxide fuel cell for high performance , 2016 .

[12]  Ali Volkan Akkaya,et al.  Electrochemical model for performance analysis of a tubular SOFC , 2007 .

[13]  Xiongwen Zhang,et al.  A review of integration strategies for solid oxide fuel cells , 2010 .

[14]  P. Kumar..  A framework for multi-objective optimization andmulti-criteria decision making fordesign of electrical drives , 2008 .

[15]  Bin Chen,et al.  Thermodynamic analysis and performance optimization of solid oxide fuel cell and refrigerator hybrid system based on H2 and CO , 2016 .

[16]  Yongping Yang,et al.  Parameter optimization study on SOFC-MGT hybrid power system , 2011 .

[17]  Bin Zhu,et al.  Next generation fuel cell R&D , 2006 .

[18]  Francesco Calise,et al.  Full load synthesis/design optimization of a hybrid SOFC–GT power plant , 2007 .

[19]  Ramin Roshandel,et al.  Two strategies for multi-objective optimisation of solid oxide fuel cell stacks , 2014 .

[20]  Daniele Cocco,et al.  Externally reformed solid oxide fuel cell–micro-gas turbine (SOFC–MGT) hybrid systems fueled by methanol and di-methyl-ether (DME) , 2009 .

[21]  Azra Selimovic,et al.  Networked solid oxide fuel cell stacks combined with a gas turbine cycle , 2002 .

[22]  Jasbir S. Arora,et al.  Survey of multi-objective optimization methods for engineering , 2004 .

[23]  Sepehr Sanaye,et al.  4E analysis and multi objective optimization of a micro gas turbine and solid oxide fuel cell hybrid combined heat and power system , 2014 .

[24]  Dimitri N. Mavris,et al.  Modeling and Cost Optimization of Combined Cycle Heat Recovery Generator Systems , 2003 .

[25]  Fabio Rinaldi,et al.  Exergetic, economic and environmental analyses and multi-objective optimization of an SOFC-gas turbine hybrid cycle coupled with an MSF desalination system , 2014 .

[26]  Francesco Calise,et al.  Simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell (SOFC)–Gas Turbine System , 2006 .

[27]  Denver F. Cheddie,et al.  Thermo-economic optimization of an indirectly coupled solid oxide fuel cell/gas turbine hybrid power plant , 2011 .