Influence of filtration conditions on membrane fouling and scouring aeration effectiveness in submerged membrane bioreactors to treat municipal wastewater.

Membrane fouling and scouring aeration effectiveness were studied using three large pilot-scale submerged membrane bioreactors (MBRs) operated at a series of permeate fluxes, scouring aeration intensities and cyclic aeration frequencies to treat municipal wastewater. The results showed that when operated at the sustainable conditions, the MBRs had a stable reversible fouling resistance. At unsustainable conditions, the reversible fouling resistance increased exponentially as filtration progressed. For each of above two cases, the fouling ratios newly defined by Eqs. (7) and (8) were calculated from the transmembrane pressure increases to compare the relative reversible fouling rates. With the range of sustainable filtration conditions, the fouling ratios at the same reference scouring aeration intensity were found to be proportional to permeate flux. Similarly, the fouling ratios calculated with the same reference permeate flux decreased exponentially with increasing scouring aeration intensity. Moreover, the effects of scouring aeration intensity and permeate flux on the fouling ratios were found to be independent of one another. As a result, an empirical relationship was derived to relate the stable reversible fouling resistance to sustainable permeate fluxes and scouring aeration intensities. Its application was demonstrated by constructing transmembrane pressure contours overlaid with scouring aeration effectiveness contours to aid in the selection of optimal MBR filtration conditions.

[1]  Thomas Arnot,et al.  Controlling fouling in membrane bioreactors operated with a variable throughput , 2002 .

[2]  Michel Y. Jaffrin,et al.  Effect of cake thickness and particle polydispersity on prediction of permeate flux in microfiltration of particulate suspensions by a hydrodynamic diffusion model , 2000 .

[3]  F. Fan,et al.  Identification of wastewater sludge characteristics to predict critical flux for membrane bioreactor processes. , 2006, Water research.

[4]  N. Engelhardt,et al.  Integration of membrane filtration into the activated sludge process in municipal wastewater treatment , 1998 .

[5]  El Hani Bouhabila,et al.  Microfiltration of activated sludge using submerged membrane with air bubbling (application to wastewater treatment) , 1998 .

[6]  Simon Judd,et al.  Membrane Fouling in Membrane Bioreactors for Wastewater Treatment , 2002 .

[7]  A. Grasmick,et al.  Floc size distribution in a membrane bioreactor and consequences for membrane fouling , 1998 .

[8]  Kazuo Yamamoto,et al.  Direct Solid-Liquid Separation Using Hollow Fiber Membrane in an Activated Sludge Aeration Tank , 1989 .

[9]  A. E. Greenberg,et al.  Standard methods for the examination of water and wastewater : supplement to the sixteenth edition , 1988 .

[10]  M. Kraume,et al.  Performance of a bioreactor with submerged membranes for aerobic treatment of municipal waste water. , 2002, Water research.

[11]  Alain Grasmick,et al.  Characterisation and modelling of fouling in membrane bioreactors , 2002 .

[12]  Robert H. Davis,et al.  The behavior of suspensions and macromolecular solutions in crossflow microfiltration , 1994 .

[13]  Simon Judd,et al.  Air sparging of a submerged MBR for municipal wastewater treatment , 2002 .

[14]  Che-Jen Lin,et al.  Effect of operating parameters on permeate flux decline caused by cake formation a model study , 2005 .

[15]  Simon Judd,et al.  Impact of aeration, solids concentration and membrane characteristics on the hydraulic performance of a membrane bioreactor , 2003 .