Progress in DC Testing of Generator Stator Windings: Theoretical Considerations and Laboratory Tests

The aging due to mechanical, thermal, electrical, and environmental stresses of a stator insulation system inherently involves alterations of the material properties that are detrimental to its service operation. When these properties are deteriorated to the point where the material can no longer operate safely under normal stress conditions, it implies that it has reached the end of its useful life. To prevent such forced outages and improve the useful life, condition-based maintenance and diagnostic tests are periodically conducted on stator insulation systems. Among the tests performed to assess the condition of winding insulation, various methods are commonly used, such as partial discharge measurements, hipot, step voltage, and ramped voltage tests (RTs), to name just a few. DC testing, where the current is continuously monitored, whether during a step voltage test, such as the polarization/depolarization test, or during a linearly increasing voltage test, such as the RT, is commonly used in the field in order to assess the quality of stator winding insulating systems of large synchronous rotating machines. Both of these tests are related to the dielectric response of the insulation system. This paper presents theoretical considerations on the dielectric response of the various types of machine winding insulation systems encounter in the field as well as laboratory results on individual bars and coils.

[1]  E. David,et al.  Measurements of polarization/depolarization currents for modern epoxy-mica bars in different conditions , 2007, 2007 Electrical Insulation Conference and Electrical Manufacturing Expo.

[2]  H. Zhu.  Insulation resistance measurements versus temperature made on aged stator bars and coils , 2007, 2007 Electrical Insulation Conference and Electrical Manufacturing Expo.

[3]  L. Lamarre,et al.  The use of transient current for the evaluation of the condition of rotor and stator insulation systems of large synchronous rotating machines , 2005, Proceedings Electrical Insulation Conference and Electrical Manufacturing Expo, 2005..

[4]  A. Nair,et al.  Modeling of a generator I-V curve from the ramped direct voltage method , 2006, Conference Record of the 2006 IEEE International Symposium on Electrical Insulation.

[5]  Eric David,et al.  The use of time domain spectroscopy as a diagnostic tool for rotating machine windings , 2002, Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316).

[6]  E. David,et al.  Modeling of the Dielectric Response of a Stator Winding Insulation from a DC Ramp Test , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  B. V. Hamon,et al.  An approximate method for deducing dielectric loss factor from direct-current measurements , 1952 .

[8]  E. David,et al.  Investigation on the low frequency dielectric response of ground-wall insulation of rotating machine windings , 2003, 2003 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[9]  E. David,et al.  Influence of rise time on dielectric parameters extracted from time domain spectroscopy in the context of generator stator insulation , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[10]  E. David,et al.  Modeling of the low-frequency dielectric response of rotating machine stator insulation system , 2005, CEIDP '05. 2005 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2005..

[11]  E. David,et al.  Temperature and voltage dependence of dielectric properties of modern epoxy mica insulations of HV rotating machines , 2007, 2007 Electrical Insulation Conference and Electrical Manufacturing Expo.

[12]  H. Borsi,et al.  Dielectric response studies on insulating system of high voltage rotating machines , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[13]  E. David,et al.  Condition assessment of rotating machine winding insulation by analysis of charging and discharging currents , 2006, Conference Record of the 2006 IEEE International Symposium on Electrical Insulation.

[14]  F. Veillon.  ACM Algorithm 486: Numerical Inversion of Laplace Transform , 1974 .

[15]  G. Milovanović,et al.  Numerical Inversion of the Laplace Transform , 2005 .

[16]  Francoise Veillon,et al.  Algorithm 486: Numerical inversion of Laplace transform [D5] , 1974, CACM.

[17]  A. Helgeson,et al.  Analysis of dielectric response measurement methods and dielectric properties of resin-rich insulation during processing , 2000 .

[18]  E. David,et al.  Low-frequency dielectric response of epoxy-mica insulated generator bars during multi-stress aging , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[19]  W. McDermid,et al.  Assessing the condition of hydrogenerator stator winding insulation using the ramped high direct-voltage test method , 2001 .

[20]  V. Zakian.  Numerical inversion of Laplace transform , 1969 .

[21]  E. David,et al.  Temperature dependence of the resistance of modern epoxy mica insulation of HV rotating machines , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[22]  E. David,et al.  Low-frequency dielectric response of asphalt bonded insulation , 2004, Proceedings of the 2004 IEEE International Conference on Solid Dielectrics, 2004. ICSD 2004..

[23]  J. Diard,et al.  Numerical inversion of Laplace transforms.: A useful tool for evaluation of chemical diffusion coefficients in ion-insertion electrodes investigated by PITT , 2007 .

[24]  A. Jonscher.  Dielectric relaxation in solids , 1983 .