Performance optimization of a flexible manufacturing system using simulation: the Taguchi method versus OptQuest

The Taguchi method is widely used in the field of manufacturing systems performance simulation and improvement. On the other hand, Arena/OptQuest is one of the most efficient contemporary simulation/optimization software tools. The objective of this paper is to evaluate and compare these two tools applied to a flexible manufacturing system performance optimization context, based on simulation. The principal purpose of this comparison is to determine their performances based on the quality of the obtained results and the gain in the simulation effort. The results of the comparison, applied to a flexible manufacturing system mean flow time optimization, show that the Arena/OptQuest optimization platform outperforms the Taguchi optimization method. Indeed, the Arena/OptQuest permits one, through the lowest experimental effort, to reliably minimize the mean flow time of the studied flexible manufacturing system more than the Taguchi method.

[1]  Felix T.S. Chan,et al.  Flexibility performance: Taguchi's method study of physical system and operating control parameters of FMS , 2007 .

[2]  Paul Rogers.  Optimum-seeking simulation in the design and control of manufacturing systems: experience with OptQuest for Arena , 2002, Proceedings of the Winter Simulation Conference.

[3]  J. Douglas Barrett,et al.  Taguchi's Quality Engineering Handbook , 2007, Technometrics.

[4]  Abdessalem Jerbi,et al.  Cellular or Functional Layout , 2013 .

[5]  Felix T.S. Chan,et al.  Impact of operation flexibility and dispatching rules on the performance of a flexible manufacturing system , 2004 .

[6]  TsaiChi-Sheng.  Evaluation and optimisation of integrated manufacturing system operations using Taguch's experiment design in computer simulation , 2002 .

[7]  C. Butler,et al.  A primer on the Taguchi method , 1992 .

[8]  Manuel Mucientes,et al.  Processing times estimation in a manufacturing industry through genetic programming , 2008, 2008 3rd International Workshop on Genetic and Evolving Systems.

[9]  P. D. D. Dominic,et al.  Efficient dispatching rules for dynamic job shop scheduling , 2003 .

[10]  Qingcheng Zeng,et al.  Integrating simulation and optimization to schedule loading operations in container terminals , 2009, Comput. Oper. Res..

[11]  Ali Gharbi,et al.  Production control problem integrating overhaul and subcontracting strategies for a quality deteriorating manufacturing system , 2016 .

[12]  Djamil Aïssani,et al.  Modeling, Simulation and Performance Analysis of a Flexible Production System , 2015 .

[13]  Young-Jun Son,et al.  Performance comparison of search-based simulation optimisation algorithms for operations scheduling , 2005, Int. J. Simul. Process. Model..

[14]  Richard Craig Van Nostrand,et al.  Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement , 2002, Technometrics.

[15]  Howe Chiat Cheng,et al.  Simulation optimization of part input sequence in a flexible manufacturing system , 2011, Proceedings of the 2011 Winter Simulation Conference (WSC).

[16]  Gabriel A. Wainer,et al.  Proceedings of the 2016 Winter Simulation Conference , 2016 .

[17]  Ieee Staff,et al.  Proceedings of the 2011 Winter Simulation Conference , 2011 .

[18]  Paul Rogers,et al.  Performance evaluation of inventory replenishment strategies in a capacitated supply chain under optimal parameter settings , 2010 .

[19]  Hari Singh,et al.  Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique—A comparative analysis , 2008 .

[20]  Fred W. Glover,et al.  Simulation optimization: a review, new developments, and applications , 2005, Proceedings of the Winter Simulation Conference, 2005..

[21]  P. Sánchez,et al.  PRACTICAL INTRODUCTION TO SIMULATION OPTIMIZATION , 2003 .

[22]  Abdulrahman Al-Ahmari,et al.  Experimental Design of a Flexible Manufacturing System , 2014 .

[23]  R. H. Smith.  Optimization for Simulation : Theory vs . Practice , 2002 .

[24]  Abdessalem Jerbi,et al.  Comparing functional and cellular layouts using simulation and Taguchi method , 2010 .

[25]  Michael C. Fu,et al.  Feature Article: Optimization for simulation: Theory vs. Practice , 2002, INFORMS J. Comput..

[26]  Abdessalem Jerbi,et al.  The cellular manufacturing paradox: a critical review of simulation studies , 2008 .

[27]  Long-Fei Wang,et al.  Simulation Optimization: A Review on Theory and Applications , 2013 .

[28]  Nagala Theja.  MECHATRONIC BASED ENERGY MANAGEMENT AND AUTOMATION SYSTEM FOR AGRO INDUSTRIES , 2015 .

[29]  Ran Liu,et al.  A survey on simulation optimization for the manufacturing system operation , 2018 .

[30]  Averill M. Law,et al.  Simulation Modeling and Analysis , 1982 .

[31]  Abdessalem Jerbi,et al.  Comparing functional and cellular layouts: simulation models , 2009 .

[32]  Peter Beike,et al.  Beyond Anova Basics Of Applied Statistics , 2016 .

[33]  Gaurav Kumar,et al.  The Simulation Optimization of a Flexible Manufacturing System with Arena , 2015 .

[34]  Chi-Sheng Tsai,et al.  Evaluation and optimisation of integrated manufacturing system operations using Taguch's experiment design in computer simulation , 2002 .

[35]  Ali Gharbi,et al.  Replenishment, production and quality control strategies in three-stage supply chain , 2015 .

[36]  D. Stamatis,et al.  Orthogonal Arrays and Linear Graphs , 2002 .

[37]  Hamidreza Eskandari,et al.  Performance analysis of comercial simulation-based optimization packages: OptQuest and Witness Optimizer , 2011, Proceedings of the 2011 Winter Simulation Conference (WSC).

[38]  Abdelhakim Artiba,et al.  A joint optimization-simulation model to minimize the makespan on a repairable machine , 2015, 2015 International Conference on Industrial Engineering and Systems Management (IESM).