High temperature bending properties and failure mechanism of 3D needled C/SiC composites up to 2000 ℃

[1]  Ke Peng,et al.  Effect of high-temperature heat treatment on the microstructure and mechanical behavior of PIP-based C/C-SiC composites with SiC filler , 2021, Journal of the European Ceramic Society.

[2]  Jian Zhao,et al.  Mechanical Properties of a Novel Tri-directional Carbon-Flax-Aramid Fiber Reinforced Composite , 2021 .

[3]  W. Yue,et al.  High-temperature thermal expansion behaviour of C/SiC studied using an in-situ optical visualisation method and numerical simulations in a quartz lamp array heating environment , 2021 .

[4]  B. Zha,et al.  Thermal Performance and Ablation Characteristics of C/C-SiC for Thermal Protection of Hypersonic Vehicle , 2021 .

[5]  S. Bai,et al.  Controllable fabrication and mechanical properties of C/C–SiC composites based on an electromagnetic induction heating reactive melt infiltration , 2020 .

[6]  X. Liang,et al.  Interlaminar shear behaviors of 2D needled C/SiC composites under compressive and tensile loading , 2020 .

[7]  Lai-fei Cheng,et al.  Microstructure, mechanical and ablation behaviour of C/SiC–Si with different preforms , 2019 .

[8]  Lai-fei Cheng,et al.  Designable density defect influencing the mechanical property of 3D needled C/SiC composites , 2019, Journal of Alloys and Compounds.

[9]  Hua Jin,et al.  Experimental study of ultra-high temperature interlaminar tensile strengths of 3D-needled C/C composites using the V-shaped notched specimen compression method , 2018, Mechanics of Materials.

[10]  S. Blazewicz,et al.  Mechanical and thermal properties of C/C composites modified with SiC nanofiller , 2018 .

[11]  T. Nishimura,et al.  Microstructure and high-temperature strength of silicon carbide with 2000 ppm yttria , 2017 .

[12]  A. Fery,et al.  Influence of the carbonization temperature on the mechanical properties of thermoplastic polymer derived C/C-SiC composites , 2017 .

[13]  Dian‐sen Li,et al.  Bend properties and failure mechanism of a carbon/carbon composite with a 3D needle-punched preform at room and high temperatures , 2016 .

[14]  Zhang Chunyan,et al.  Three-dimensional needle-punching for composites – A review , 2016 .

[15]  Jun Liang,et al.  Experimental study of high-temperature tensile mechanical properties of 3D needled C/C–SiC composites , 2016 .

[16]  Jun Liang,et al.  Effect of needling parameters on the effective properties of 3D needled C/C-SiC composites , 2015 .

[17]  Dian‐sen Li,et al.  High temperature compression properties and failure mechanism of 3D needle-punched carbon/carbon composites , 2015 .

[18]  F. Zok,et al.  Matrix cracking of fiber-reinforced ceramic composites in shear , 2014 .

[19]  Lai-fei Cheng,et al.  Tribological behavior of three-dimensional needled carbon/silicon carbide and carbon/carbon brake pair , 2014 .

[20]  Aijun Li,et al.  Microstructure and ablation mechanism of C/C–SiC composites , 2014 .

[21]  C. Asma,et al.  Experimental investigation of passive/active oxidation behavior of SiC based ceramic thermal protection materials exposed to high enthalpy plasma , 2013 .

[22]  Lai-fei Cheng,et al.  Comparison of the mechanical hysteresis of carbon/ceramic-matrix composites with different fiber preforms , 2009 .

[23]  Lai-fei Cheng,et al.  Effect of thermal cycling on modulus and tensile strength of 3D needled C/SiC composite in controlled environments , 2008 .

[24]  H. Mei.  Measurement and calculation of thermal residual stress in fiber reinforced ceramic matrix composites , 2008 .

[25]  Michael J. Hoffmann,et al.  Influence of heat treatment on microstructure and properties of highly textured pyrocarbons deposited during CVD at about 1100 °C and above 2000 °C , 2008 .

[26]  A. Eckel,et al.  Oxidation Kinetics and Stress Effects for the Oxidation of Continuous Carbon Fibers within a Microcracked C/SiC Ceramic Matrix Composite , 2008 .

[27]  Y. Katoh,et al.  Handbook of SiC properties for fuel performance modeling , 2007 .

[28]  R. Young,et al.  A Raman spectroscopic investigation of heating effects and the deformation behaviour of epoxy/SWNT composites , 2004 .

[29]  F. Christin.  Design, Fabrication, and Application of Thermostructural Composites (TSC) like C/C, C/SiC, and SiC/SiC Composites , 2002 .

[30]  L. Guillaumat,et al.  Development of damage in a 2D woven C/SiC composite under mechanical loading: I. Mechanical characterization , 1996 .

[31]  N. Ramakrishnan,et al.  Effective Elastic Moduli of Porous Ceramic Materials , 1993 .